-->rn

Conditions of Use

    OF:
    HAJÉ Electronics
    Oude Kerkstraat 7
    6325EE Berg en Terblijt
    The Netherlands

    Hereinafter to be referred to as: user.

Article 1    Definitions

  1. In the present general terms and conditions, the following terms are used in the sense given below, unless explicitly indicated otherwise.

  2. User: the user of the general terms and conditions.
    Buyer: the user's opposite party, acting in the course of a business or in the course of a profession.
    Agreement: the agreement between the user and buyer.

Article 2    General

  1. The stipulations of the present terms and conditions shall apply to each and every offer and agreement between user and a buyer, to which user has declared the present terms and conditions applicable, insofar as parties have not explicitly deviated from the present terms and conditions in writing.
  2. The present terms and conditions shall also apply to all agreements with user, the execution of which calls for the services of third parties.
  3. The buyer's general terms and conditions shall only apply if parties have explicitly agreed in writing that said general terms and conditions shall apply to the present agreement with the exclusion of the present general terms and conditions. In that event possibly still conflicting stipulations in the user's and buyer's general terms and conditions shall only apply between parties, if and in so far that they are a part of user's general terms and conditions.
  4. If one or more stipulations in the present general terms and conditions should be null and void or declared null and void, then the other stipulations of the present general terms and conditions shall remain fully applicable. The case ensuing, user and buyer shall enter into negotiations to agree upon new stipulations replacing the null and void conditions, or, as the case may be, the conditions declared null and void, whereby the purpose and the meaning of the original conditions shall be heeded as far as possible.

Article 3    Offers and Tenders

  1. All offers shall be free of obligation unless the offer contains an acceptance term.
  2. The offers made by user shall be free of obligation; they shall be valid for a period of thirty days, unless indicated otherwise. User shall only be bound by the offers if the acceptance thereof is confirmed in writing by the buyer within thirty days.
  3. Terms of delivery given in user's offers shall only be tentative and exceeding these terms of delivery shall not entitle buyer to dissolution or damages, unless explicitly agreed upon otherwise.
  4. The prices given in above-mentioned offers and tenders shall be exclusive of VAT and other government levies, as well as of shipment costs and possible packaging and administration costs, unless explicitly stated otherwise.
  5. If the acceptance deviates (on secondary items) from the offer given, user shall not be bound by it. The agreement shall in such event not be concluded in accordance with said deviating acceptance, unless user indicates otherwise.
  6. A compound quotation shall not oblige user to execute part of the assignment against a corresponding part of the given quotation.
  7. Offers and tenders shall not apply automatically to repeat orders.

Article 4    Execution of the Agreement

  1. User shall execute the agreement to the best of his knowledge and ability.
  2. If and in so far required for the proper execution of the agreement, user shall have the right to have certain work done by third parties.
  3. The buyer shall see to it that user shall be provided in due time with all data which user has said to be necessary or which the buyer must in all reasonableness understand to be necessary to the execution of the agreement. If user has not been provided in due time with the data necessary to the execution of the agreement, user shall have the right to suspend the execution of the agreement and / or to charge the buyer for the additional costs resulting from the delay at the generally accepted rates.
  4. User shall not be liable for damage of whatever nature caused by the fact that user worked on the basis of incorrect and / or incomplete data provided by the buyer, unless user should have been aware of said incorrectness or incompleteness.
  5. If parties have agreed that the agreement will be executed in stages, user can suspend the execution of the parts belonging to a following stage until the buyer has approved in writing the results of the stage prior to it.
  6. If user or third parties engaged by user within the scope of the assignment do work at buyer's site or at a site designated by buyer, buyer shall provide the employees having to work there free of charge with all facilities desired in all reasonableness by said employees.
  7. Buyer shall safeguard user against possible claims filed by third parties who may sustain damage attributable to buyer in connection with the execution of the agreement.

Article 5    Delivery

  1. Delivery shall be made ex works/store/warehouse of user.
  2. If delivery is made on the basis of the "Incoterms", the "Incoterms" valid at the moment the agreement is concluded, shall apply.
  3. Buyer shall be held to take delivery of the goods the moment that user delivers them to him or has them delivered, or the moment at which the goods are put at buyer's disposal under the agreement.
  4. If the buyer refuses to take delivery or fails to give the information or instructions necessary to the delivery, user shall be entitled to store the goods at buyer's risk and expense.
  5. If the goods are serviced, user shall be entitled to charge possible service charges. Said service charges shall then be invoiced separately.
  6. If, in the framework of the execution of the agreement, user requires data to be given by the buyer, the term of delivery shall commence after the buyer has provided user with said data
  7. If user has given a term of delivery, it shall only be indicative. A given term of delivery shall therefore never constitute a term to be observed on penalty of forfeiture of rights. If a term is exceeded, the buyer must give user notice of default in writing.
  8. User shall be entitled to deliver the goods in parts, unless such is deviated from in writing in the agreement or if the partial delivery does not represent an independent value. User shall be entitled to invoice the thus delivered goods separately.
  9. If execution of the agreement in stages has been agreed upon, user can suspend the execution of the parts belonging to a following stage until the buyer has approved in writing the results of the stage prior to it.

Article 6    Samples and Models

  1. If a sample or model has been given to buyer, then the assumption is that such has been given by way of indication only, unless parties agree explicitly that the product to be delivered shall correspond with it.
  2. In the event of purchase of immovable property, the surface area or other measurements and indications given shall also be assumed to be merely indicative without any obligation to have the product to be delivered correspond with it.

Article 7    Inspection & Complaints

  1. Buyer shall be held to examine the delivered goods (to have the delivered goods inspected) the moment of delivery (handing over), but in any case in as short a period of time as possible. In this respect, buyer must examine whether the quality and the quantity of the delivered goods comply with what was agreed upon, or at least whether they meet the requirements applying to said goods in normal (business) transactions.
  2. Buyer shall check all delivered goods and in particular semi conductors and transformers, before using them.
  3. Possible visible shortcomings must be communicated in writing to user within three days following delivery. Non-visible shortcomings must be reported within three weeks following their detection but no later than 12 months following delivery.
  4. If in accordance with the previous paragraph, buyer files his complaint in due time, he shall still be held to take delivery and effect payment of the goods purchased. If buyer wishes to return defect goods, he shall do so following prior consent in writing from user.

Article 8    Remuneration, Price and Costs

  1. If user and buyer have agreed upon an administered price, user shall nevertheless be entitled to increase said price.
  2. User shall be allowed among others, to charge on price increases if changes in price have occurred between the moment the offer was made and the moment of execution of the agreement with respect to, e.g., exchange rates, salaries and wages, raw material, semi-finished products or packaging material.
  3. The prices given by user shall be exclusive of VAT and other government levies, as well as of the other expenses to be possibly made within the scope of the agreement, including shipment and administration costs, unless stated otherwise.

Article 9    Changes to the agreement

  1. If it is shown during the execution of the agreement that the work to be done needs to be changed and / or supplemented in order to ensure its proper execution, parties shall adapt the agreement accordingly in due time and in mutual consultations.
  2. If parties agree that the agreement needs to be changed and / or supplemented, this decision may influence the time of completion of the execution. User shall inform the buyer thereof as soon as possible.
  3. Should the change and / or supplement to the agreement have any financial and / or qualitative consequences, user shall inform buyer thereof in advance.
  4. If a fixed rate has been agreed upon then user shall indicate the degree to which the change or supplement to the agreement will result in an increase of said fixed rate.
  5. Contrary to the conditions governing this matter, user shall not be able to charge additional costs if the change or supplement is the result of circumstances attributable to user.

Article 10    Payment

  1. Payment must be made within 14 days from the date of invoice, in a way to be indicated by user and in the currency in which the goods were invoiced. Contestation of the amount of the invoices shall not suspend the fulfilment of the payment obligation
  2. User has the right to require payment in advance, cash, as require certainty for payment from the buyer
  3. If buyer fails to fulfil his payment obligation within the term of 14 days, then buyer shall be in default by operation of law. In that event, buyer shall owe an interest of 1% per month, unless the statutory interest rate is higher, in which case the statutory interest rate shall apply. The interest on the amount due and payable shall be calculated as from the day the buyer is in default until the moment he has paid the amount in full.
  4. User's claims against buyer shall become due on demand in the event that buyer is wound up, attached, declared bankrupt, or if a suspension of payment is granted.
  5. User shall be entitled to have the payments made by the buyer go first of all to reduce the costs, subsequently to reduce the interest still due and finally to reduce the principal sum and the current interest. User shall have the right, without this leading user to be in default, to refuse an offer for payment, if the buyer designates a different sequence of attribution. User shall be entitled to refuse full payment of the principal sum, if said payment does not include the interest still due, the current interest and the costs.
  6. User has the possibility to charge a credit limitation surcharge of 2%. This surcharge will not be charged if payment is made within 7 days from the date of invoice.

Article 11    Retention of Title

  1. All goods delivered by user, possibly also including designs, sketches, drawings, films, software, (electronic) files, etc., shall remain user's property until buyer has fulfilled all of his obligations under all agreements concluded with user.
  2. Buyer shall not be authorised to pledge or encumber in any way the goods falling under the retention of title.
  3. If third parties seize goods delivered subject to retention of title or wish to establish or assert a right to them, buyer shall be held to inform user thereof as soon as can reasonably expected.
  4. The buyer shall undertake to insure the goods delivered subject to retention of title and to keep them insured against damage caused by fire, explosion and water as well as against theft and make this insurance policy available for inspection on first demand.
  5. Goods delivered by user falling under the retention of title by virtue of the stipulations under 1. of the present article, may only be sold on within the framework of normal business activities and must never be used as instrument of payment.
  6. In the event that user wishes to exercise his ownership rights mentioned in the present article, buyer shall give user or third parties to be appointed by user, now for then, unconditional and irrevocable permission to access all sites and locations where user's property might be found and to take these goods back.

Article 12    Guarantee

  1. User shall guarantee that the goods to be delivered shall meet the usual requirements and standards that can be set for and made upon them.
  2. The guarantee mentioned under 1 shall equally apply if the goods to be delivered are destined for use abroad and if the buyer explicitly informed user of this use in writing the moment the agreement was entered into.
  3. The guarantee mentioned under 1 shall be valid for a period of 6 / 12 months following delivery. (see 6.)
  4. If the good to be delivered does not comply with said guarantee, user shall, at his discretion, replace or see to the repair of the good, within a reasonable period of time following receipt thereof, or, if the good cannot be returned in reason, following notification of the defect by the buyer. In the event the good is replaced, the buyer shall already now undertake to return the replaced good to user and to transfer ownership to user.
  5. The guarantee mentioned for this purpose shall not apply when the defect originated as the result of injudicious or improper use or when the buyer or third parties have introduced changes or tried to introduce changes to the good without user's consent in writing or if they have used it for purposes for which the good was not intended.
  6. If the guarantee given by user concerns a good produced by a third party, the guarantee shall be limited to the guarantee given by the producer of the good.

Article 13    Collection Charges

  1. If the buyer fails to fulfil his obligations (in due time) or defaults on them, then all reasonable costs incurred to have all extrajudicial costs and debts paid shall be borne by the buyer. If the buyer remains in default of payment within the set time period, he forfeits a immediately payable fine of 15% on the amount due at that moment. This with a minimum of € 50.
  2. If user demonstrates that he has incurred higher expenses, which were necessary in reason, said expenses shall also qualify for reimbursement.
  3. The reasonable judicial and execution costs possibly incurred shall equally be borne by buyer.
  4. Buyer shall owe interest over the made collection charges.

Article 14    Suspension and Dissolution

  1. User shall be authorised to suspend the fulfilment of the obligations under the agreement or to dissolve the agreement, in the event that:
    • buyer does not fulfil or does not fully fulfil his obligations resulting from the agreement
    • after the agreement has been concluded, user learns of circumstances giving good ground to fear that the buyer will not fulfil his obligations. If good ground exists to fear that the buyer will only partially or improperly fulfil his obligations, suspension shall only be allowed in so far the shortcoming justifies such action.
    • buyer was asked to furnish security to guarantee the fulfilment of his obligations resulting from the agreement when the contract was concluded and that this security is not provided or insufficient. As soon as security is furnished, the authorisation to suspend shall lapse, unless said fulfilment has been unreasonably delayed because of it.
  2. User shall furthermore be authorised to dissolve the agreement (have the agreement dissolved) if circumstances arise of such a nature that fulfilment of the obligations becomes impossible or can no longer be demanded in accordance with the requirements of reasonableness and fairness, or if other circumstances arise of such a nature that the unaltered maintenance of the agreement can no longer be demanded in all reasonableness.
  3. If the agreement is dissolved, the user's claims against the buyer shall be forthwith due and payable. If user suspends fulfilment of his obligations, he shall retain his rights under the law and the agreement.
  4. User shall always retain the right to claim damages.

Article 15    Return of Goods Put at Buyer's Disposal

  1. If user has put goods at buyer's disposal during and in connection with the execution of the agreement, buyer shall be held to return the delivered goods within 14 days in their original state, free of defects and in their entirety. If buyer fails to fulfil this obligation, all resulting costs shall be at buyer's expense.
  2. If, for any reason whatsoever, buyer still remains in default to fulfil the obligation mentioned under 1. after being warned to do so, user shall be entitled to recover the resulting damage and costs, including replacement costs, from buyer.

Article 16    Liability

  1. If the goods delivered by user are defective, user's liability vis à vis the buyer shall be limited to the arrangements made in the present terms and conditions under "Guarantee".
  2. If user is liable for direct damage, then said liability shall be limited to a maximum of the amount of the statement of expenses, at any rate that part of the agreement to which the liability relates. User's liability shall at all times be limited to a maximum equalling the amount of the payment to be made by user's insurer in the occurring event.
  3. Direct damage shall be understood to be exclusively:
    • the reasonable costs incurred to establish the cause and the volume of the damage, in so far said establishment relates to damage in the sense of the present terms and conditions
    • the reasonable costs possibly incurred to have user's faulty performance meet the conditions of the agreement, unless such faulty performance cannot be attributed to user;
    • the reasonable costs incurred to prevent or limit the damage, in so far buyer demonstrates that said costs have led to the limitation of direct damage as meant in the present general terms and conditions.
  4. User shall never be liable for indirect damage, including consequential damage, loss of profit, lost savings and damage due to business stagnation.
  5. The limitations of liability for direct damage contained in the present terms and conditions shall not apply if the damage is due to intentional act or omission or gross negligence on the part of user or his subordinates.

Article 17    Transfer of Risk

  1. The risk of loss of, or damage to the products being the subject of the agreement, shall be transferred to buyer the moment said products are judicially and/or actually delivered to buyer and therefore fall into the power of buyer or of third parties to be appointed by buyer.

Article 18    Force Majeure

  1. Parties shall not be held to fulfil any of their obligations if they are hindered to do so due to a circumstance through no fault of their own and which cannot be attributed to them by virtue of law, a legal action or generally accepted practice.
  2. In addition to the provisions of the law and the judge-made law in this respect, force majeure shall in the present general terms and conditions furthermore be understood to be any external circumstance, be it envisaged or not, on which user cannot have any influence but which prevents user from fulfilling his obligations. Industrial action at user's company shall also be understood to be a circumstance of force majeure.
  3. User shall also be entitled to invoke force majeure if the circumstance rendering (further) fulfilment of the obligation(s) impossible, commences after the point in time on which user should have fulfilled his obligation.
  4. Throughout the duration of the circumstances of force majeure, parties shall be entitled to suspend the fulfilment of their obligations. If this period lasts for more than two months, either of the parties shall be entitled to dissolve the agreement without any obligation to pay the opposite party damages.
  5. Insofar user has already partially fulfilled his obligations resulting from the agreement at the moment the circumstance of force majeure commenced or shall be able to fulfil them and insofar separate value can be attributed to the part already fulfilled or still to be fulfilled respectively, user shall be entitled to invoice the part already fulfilled or still to be fulfilled respectively. The buyer shall be held to pay this invoice as if it were a separate agreement.

Article 19    Safeguarding

  1. The buyer shall safeguard user against claims filed by third parties concerning intellectual property rights on material or data provided by the buyer, which shall be used for and during the execution of the agreement.
  2. If the buyer provides user with information carriers, electronic files or software etc., the former shall guarantee that said information carriers, electronic files or software are free of viruses and defects.

Article 20    Intellectual Property and Copyrights

  1. Without prejudice to the other stipulations of the present general terms and conditions, user shall reserve the rights and authorities to which user is entitled under the Copyright Act.
  2. The buyer shall not be allowed to introduce changes to the goods and material provided, unless the nature of the delivered goods and material dictates otherwise or if agreed upon otherwise in writing.
  3. The designs, sketches, drawings, films, software and other material or (electronic) files, possibly produced by the user within the framework of the agreement, shall remain user's property, irrespective of the fact whether they have been handed over to the buyer or to third parties, unless agreed upon otherwise in writing.
  4. All documents, such as designs, sketches, drawings, films, software, (electronic) files, etc., provided by user, shall be destined to be used by buyer exclusively and must not be reproduced, made public or brought to the notice of third parties by buyer without prior consent from user, unless the nature of the documents provided dictates otherwise.
  5. User shall reserve the right to use the knowledge gained due to the execution of the work for other purposes, in so far no confidential information shall be brought to the notice of third parties when doing so.

Article 21    Secrecy

  1. Both parties shall be bound to secrecy of all confidential information they have received within the scope of their agreement from each other or from another source. Information shall be considered to be confidential if the other party has indicated so or if the confidential character results from the nature of the information.
  2. If a statutory provision or a judicial decision compels user to convey confidential information to third parties designated by law or by the court and user cannot for that purpose invoke a legal right to refuse to give evidence or such a right acknowledged or allowed by the competent court, user shall not be held to pay damages or compensation and the opposite party shall not be entitled to demand the dissolution of the agreement on the ground of any damage resulting from said circumstance.

Article 22    Non-employment of the opposite party's personnel

  1. Throughout the duration of the agreement and for one year following termination thereof, buyer shall not in any way, hire or employ in any other way, be it directly or indirectly, staff of user or of enterprises whom user has engaged to execute the present agreement and who are (were) involved in the execution of the agreement, without prior proper businesslike consultation on this matter, all this in accordance with the requirements of reasonableness and fairness.

Article 23    Disputes

  1. The Court in user's place of business shall have exclusive jurisdiction to hear actions, unless the District Court is the competent Court. User shall nevertheless be entitled to submit the dispute to the Court deemed competent by the law.
  2. Parties shall only refer the matter to the court if they have done their utmost to solve the dispute in mutual consultations.

Article 24    Applicable Law

  1. Dutch law shall apply to each and every agreement between user and the buyer. The Vienna Sales Convention shall be explicitly excluded.

Article 25    Changes to the Terms and Conditions, interpretation and their location

  1. The present terms and conditions have been filed at the office of the Chamber of Commerce in Maastricht, under number 14621286.
  2. The Dutch version of these general terms and conditions prevails at all time in case of disputes with regard to the interpretation and purpose of these terms and conditions.
  3. The most recently filed version shall always apply, or, as the case may be, the version valid at the time the agreement was concluded.
    Berg en Terblijt , November 2015
    HAJÉ Electronics
    J.J.M. Biermans
1 x 1 GHz Prescaler :64 DIL-85 x SI-P 40V 25mA 300mW1 x 1 Megabit 128K x 8 5-volt Only CMOS Flash Memory DIL-322 x 9W Wirewound resistor 3K9 10% 9x9x38mm Vitrohm - RoHS1 x Hex Buffer Wth Com.Enable TS2 x PA Amplifier F6BQU (8Watt HF) for 20 or 40 meter6 x Desoldering wick 1.9mm x 1.50 mtr (7-5L)3 x 10 pcs Resistor 0805 - 8M23 x Metalfilm resistor 0,4W-1%-390K1 x SI-N 35V 500mA 400mW TO-9245 x Quad 2 Inp. Exclusive NOR Gate8 x PNP 25V 100mA 300mW TO-927 x Quad 2 Input NOR Gate DIL-148 x Standard recovery rectifier for general purpose2 x Labory socket ø2,6mm with side-entry - white1 x 1 of 10 Decoder6 x SI-N 200V 140mA 10W TO-1263 x 7 NPN Transistor Array DIL-166 x MKT Capacitor 3,3nF/63V 5mm3 x 4 bit Bin. Counter Synch Reset DIL-161 x Schottky diode sb-d 100V 0.1A DO-353 x Silicon gate CMOS 32,768 Word x 8 Bit STATIC RAM DIL-28W3 x CHMOS single-chip 8-bit microcontroller. 3.5MHz to 24MHz DIL-4027 x quad 2-inp nand gate DIL-1426 x Quad TS Buffer Low Enable DIL-147 x Ceramic capacitor 10nF e=5,08mm4 x NPN 50V 200mA 300mW TO-925 x Ceramic. multilayer 10nF 50V 10% e=5.0mm6 x Quad 2 Input Exclusive OR Gate DIL-141 x 1 of 10 Decoder9 x Metalfilm resistor 0.4W-1%-680E2 x arco466 - 70 - 480pF - 20x15mm5 x Elco radial 3300uF/25V 16x25mm e=7,5mm 105°1 x Diode schotty RF 60v 15ma 0.1ns2 x SI-N 100V 10A 125W TO-21814 x SI-N 30V 25mA 300mW TO-925 x Neg. Reg. 15V 1A TO-2204 x MKT Capacitor 10nF/63V 5mm28 x LOGIC COMPLEMENTARY INVERT DIL-144 x MKT Condensator 820nF/100V 10mm2 x 1 GHz. Prescaler :64 DIL-86 x FM Stereo Decoder DIL-143 x Quad 2 Input NOR Gate DIL-143 x Quad 2-input nand gate DIL-142 x 1 Megabit 128K x 8 5-volt Only CMOS Flash Memory2 x Quad 2 Inp. NAND Gate DIL-1412 x 1 GHz Prescaler :64 SIL-62 x 20W Power Amplifier TO-22019 x Quad Analog Switch DIL-144 x Japanese potmeter 50K mono-linear with serrated shaft3 x 10 pcs Resistor 0805 - 5M67 x si-n 1500v 8a 35w 0.6us3 x Dual Op-Amp Audio 8MHz 20V/us DIL-83 x Neg. Reg. 15V 0.1A TO-925 x NPN 50V 200mA 300mW TO-923 x Metalfilm resistor 0,4W-1%-619K5 x Jack plug 3,5mm mono plastic right angle1 x Triac 600V 6A TO-2206 x Elco radial 100uF/16V 5x11mm e=2,5mm 105°7 x SI-N 120V 400mA 1.75W TO-2202 x Hex Schmitt Trigger Dil-146 x Octal Buffer/Line Driver TS DIL-2010 x RF Transistor NPN 12V 200mA 8.5GHz 2W SOT-2232 x 7 Darlington Array DIL-167 x Zener 1.3W 10V DO-2042 x 1 megabit CMOS 12.0 volt, bulk erase flash memory PLCC-322 x Cleaner and degreaser for electronics / electrical components4 x Portable Radio Antenna for aviation, BNC plug. (IC-A4e/A-23)2 x Hex inv. buffer DIL-162 x Crystal 4,000Mhz - HC 49/U dim. W11.05 x D4.7 x H13.5mm9 x Dual Opamp. 36V 1mhz 0.8v/us DIL-82 x SI-N 45V 2A 25W2 x 1 Megabit (128 K x 8-bit) CMOS 5.0 Volt-only, Uniform Sector Fla5 x Octal Bus Transceiver TS1 x 1 of 10 Decoder2 x Hex Non Inverting Buffer DIL-165 x Jack plug 3.5 mm mono metal with tulle - Marushin2 x Ø5mm bi-polar red / green 2 connections4 x 6x inverting buffer DIL-1416 x Dual 2 to 4 Line Decdr/Demltpl DIL-1613 x Tantalum Capacitor 68uF/6,3V3 x hex buffer6 x 8 to 3 Lne Octal Priority Enc.5 x SI-P 50V 150mA 400mW TO-923 x 3-to-8 line Decoder/Demultiplexer DIL-163 x Hex D Flip-Flop2 x 10 pcs Resistor 0805 - 2M210 x BIMOS Opamp. DIL-86 x SCART plug to 3 RCA sockets (audio / video) + S-VHS + switch3 x Labory socket ø2,6mm with side-entry - yellow3 x Metalfilm resistor 0.4W-1%-56K3 x 10 pcs Capacitor 1206 - 100nF5 x Quad 2 Input NAND Gates DIL-141 x Monostabiele multivibrator CMOS LP Mono/Astable DIL-147 x Dual Monostable Multivibrator DIL-162 x 1 GHz Prescaler :64 DIL-82 x hex inv buff driv op. col DIL-162 x hex inv. buffer5 x hex schmitt trigg DIL-163 x 10 pcs Carbon Film resistor 1/4W 5% - 0E19 x octal 3-st.driver invert.DIL-2011 x Ceramic. Multilayer Axial 33nF 50V4 x 4 bit latch/4to16 Line Decoder DIL-242 x Ceramic. multilayer 270pF 50V X7R 10% e=5,0mm1 x 10 pcs Resistor 0805 - 3M39 x Oscillator 1kHz-33Mhz, SOT-23-56 x 6.0 MHz Discriminator11 x Ceramic capacitor 56pF 200V 5% e=2,54mm1 x Snap-In Elco 85° 6800uF/50V 30x40mm1 x CB Amplifier 12-14VDC, 25-30Mhz 60W2 x 1 Megabit 128K x 8 OTP CMOS EPROM8 x SI-N 25V 30mA 150mW TO-921 x Replace tip for Solderstation 20-30, Ø 5.3MM - Ø 0.3MM.1 x SI Varicap 28V 4.5-5.6pF DO-346 x 3 to 8 Line Decdr/Demltpl.Inv.3 x 1 Chip TV Sound Circ. QIL-12+2 x SI Varicap 30V 4.3-6pF8 x Dual 2 Inp. NAND Buffer/Driver5 x Dual Monostable Multivibrator DIL-1614 x PNP Transistor 50V 0.05A TO923 x Carbon film resistor 1/2W 5% - 390K1 x PNP Darlington Transistor TO-2203 x 10 pcs Capacitor 1206 - 10nF1 x PAL/Secam Synch. Demod. DIL-161 x Dual 4 Input AND Gate9 x SI-P 300V 1A 1W TO-51 x 10 pcs Resistor 0805 - 82K2 x Dual RS232 Transceiver SO-162 x 1 megabit CMOS 12.0 volt, bulk erase flash memory PLCC-323 x PNP 65v 0.1a 0.5w TO-928 x SI-P 150V 50mA 800mW TO-927 x Metalfilm resistor 0.4W-1%-4K7-RoHS2 x Quad D Flip-Flop With Clear14 x Ceramic. Multilayer Axial 47nF 50V3 x 8 bit Priority Encoder2 x SI Varicap 28V 26-32pF SOD-232 x NPN 50V 200mA 300mW TO-922 x Pos. Reg. 15V 0.1A TO-921 x Toggleswitch miniatur ø6,35mm 1-pole on-on5 x Elco axial 22uF/25V ø4,5x10mm2 x NPN 30V 0,1A 0,5W TO-924 x Dual Precision Monost.Multivib DIL-165 x 10 pcs Carbon Film resistor 1/4W 5% - 820K6 x Quad Low Noise Opamp.3 MHz, 13 V/µs, 7V to 36V, DIL-142 x 1 Megabit (131,072 x 8-Bit) CMOS 5.0 Volt-only, Sector Erase Fla6 x Elco radial 33uF/50V 5x11mm e=2,5mm 105°1 x N-Chl.FET 30V 20mA 300mW14 x NPN silicon high voltage transistor3 x Metalfilm resistor 0,4W-1%-12K41 x Tin box HF-tight (WxLxH) 55x148x30mm4 x SI-P 180V 140mA 10W TO-1263 x 1 of 10 Decoder3 x Ceramic capacitor 270pF e=5,08mm2 x 1 Megabit (128Kx8-bit)CMOS 5.0Volt, Uniform Sector Flash Memory2 x MKP capacitor 1uF 275VAC, R 27.5mm4 x Opamp. 1Mhz, 1x36V Temperature Range:-40°C to +105°C DIL-810 x 4-port USB-hub3 x 1 MEG (65536 words x 16 bit) DRAM, fast page mode, byte write3 x Metalfilm resistor 0.4W-1%-13K-RoHS3 x Quad Opamp. DIL-1415 x Silicon PNP Transistors7 x Dual Opamp. DIL-141 x Resistor 5W 0,47E 10% Low-Inductance e=10mm3 x Coil resistormodel 3,9uH 10%1 x Japanese potentiometer 1K mono-linear with serrated shaft6 x Elco radiaal 100uF/25V ø8x7mm e=2,5mm 105°2 x Fuseholder for ø5mm fuses9 x SI-P 120V 100mA 300mW TO-922 x Diode 400V 2A SOD-572 x 8 Darlington Array10 x 3W Koolfilm weerstand ø6,5x17,5mm 5% - 1,5E2 x SI-N 250V 20mA 830mW1 x Jack female connector stereo 3.5 mm plastic - Lumberg - RoHS2 x Quad 2 Input NOR Gate3 x UHF Male Twist on type AIRCELL 78 x IC socket gold plated machined dil 16p e=7,62mm7 x SI-N 60V 150mA 400mW TO-922 x triple 3-inp nand gate DIL-142 x ø3mm bi-color red/green 625nm 60° 2.5V 30mA 2-pins1 x v-comp 4x 36v 1.3us DIL-141 x PNP 60V 1A 0,7W TO-398 x Panel Fuse Holder 5x20mm - Stelvio3 x Quad Timer Circuit1 x Hex inv. buffer DIL-162 x SI-N 40V 600mA 350mW TO-921 x Ring Terminal 4,0mm Blue1 x 1 of 10 Decoder7 x si-n 30v 0.05a 0.25w uni TO-922 x 1 GHz Divider :256 DIL-145 x SI-N 30V 500mA 625mW TO-921 x PNP 45V 100mA 300mW TO-922 x Metalfilm resistor 0.4W-1%-10K-RoHS1 x DC Powerplug ø1,7xø4mm JSAP-21 x Japanese potmeter 500K mono-linear with serrated shaft1 x Labory socket ø4mm - black2 x Opamp.6 x Ceramic. multilayer 150pF 50V NP0 5% e=2,5mm4 x SI N-Chnl. FET 30V 300mW TO-923 x SI-P 40V 200mA 350mW TO-922 x PNP 65v 0.1a 0.5w TO-925 x Microphone Midland Alan 48+, 78+ en 48 Excell 6pol with up/down11 x Octal D Flip-Flop Pos. Trig.TS DIL-2010 x Quad 2 Input NOR Gate DIL-1413 x Octal Bus Transceiver TS DIL-2010 x 6x inverting buffer DIL-141 x SI-P 60V 500mA 625mW TO-921 x Neg. Adj.Volt.Regulator -1,2 - -37V 1,5A TO-2203 x Crystal 1.8432Mhz - HC 49/U dim. W11.05 x D4.7 x H13.5mm3 x si-n 120v 1a 10w 120mhz TO-1261 x Dual JK Flip-Flop Preset.Clear3 x Terminal negative regulators, -12V, 1.5A1 x Amidon Ferrite Toroids 125µ Ø 29 mm 10-200Mhz1 x Carbon film resistor 1/2W 5% - 10E1 x Button Black Ø 15.5mm with white point Axes hole Ø 6mm1 x Varistor SIOV - S10 K30 30V 0,05W ø12,0x4,4mm1 x SI Varicap Diode 28V 3-63pF, DO-344 x quad 2-input or gate1 x 8-bits Microcontrollers - MCU 4KB 256 RAM 16 I/O DIL-183 x NPN 30V 0,1A 0,5W TO-921 x Elco radial 3300uF/50V 18x35.5mm e=7.5mm 105° (ECA1HHG332)1 x Crystal 1.000Mhz - HC 49/U dim. W11.05 x D4.7 x H13.5mm6 x Schottky barrier diodes 30V, 200mA, 200mW DO-351 x Dolby B Noise Reduction DIL-164 x Quad D Flip-Flop With Clear DIL-161 x Choke coil radial 1mH around cyan2 x SI-N 350V 10A 40W TO-34 x 10 pcs Carbon film resistor 1/4W 5% - 33E2 x MKT Capacitor 47nF/63V 5mm3 x S18 Coil 0.389uH Freq.100Mhz Qu140 Purple 7.5turns2 x 10 pcs Carbon Film resistor 1/4W 5% - 180E1 x MKT Capacitor 22nF/63V 5mm1 x Triac 400V 8A TO-2203 x Print Terminal Block 3 fold, 5.08mm pin pitch2 x N-Chnl. J FET 18V 10mA TO-921 x Motorcycle helmet set with boommike for kenwood1 x presettable up/down cntr DIL-161 x Transistor NPN 250V 2A 35W TO-663 x SI Varicap 30V 2.8-3.2pF DO-351 x PNP 30V 0,1A 0,5W TO-927 x Removes flux residue from printed circuit boards3 x S18 coil 0.114uH Freq.100Mhz Qu170 orange 3.5turns1 x Finger-heat sink 45x45x25, 4mm - black not drilled1 x Rotary switch 3 pole - 4 way print1 x SI-N 30V 800mA 800mW TO-182 x MKT Capacitor 12nF/63V 5mm1 x 10 pcs Mini Resistor 1/8W SFR16T - 5% - 6,8E2 x Window clip mounting fixation BNC 2.5m coax1 x Mini piezo siren 6-12Vdc, 140mA, 107dB, wire connector3 x MKT Capacitor 220nF/63V 10mm1 x Trimmer top adjust Ø 15mm 250E1 x 6.3 mm mono jack plug with strain relief gilded square black1 x Elco Radial 47uF/16V bipolair ø6.3x11mm3 x 10 pcs Carbon Film resistor 1/4W 5% - 1K21 x HSS Twist drill with ø2.35mm shank - ø0.8mm (p / pc)1 x 10 pcs Capacitor 1206 - 4,7pF1 x si-n 12v 35ma 5ghz 18db SOT-371 x USB 2.0 Cable type A M/F 5m2 x 10 pcs Carbon Film resistor 1/4W 5% - 2M22 x Buzzer 1-13Vdc, 20-30mA, wire connector1 x RP MMCX Right Angle Crimp Male RG178 Gold1 x SI-N 120V 100mA 300mW TO-921 x DC Powerplug ø3,3xø5,5mm JSBP-4 (DC 10,5-13,5V)2 x MKT Capacitor 22nF/63V 7mm1 x NPN 80V 1A 800mW TO-922 x GE-P 30V1 x Trimmer top adjust Ø 10mm 100E1 x Carbon film resistor 1/2W 5% - 100E3 x Varistor SIOV - S20 K625 625V 1,00W ø21,5x7,9mm2 x Desoldering wick 2.8mm x 7.5 mtr (10-25L)1 x Audio Power Amp. Vcc 9V DIL-82 x Ceramic capacitor 390pF e=2,54mm1 x Ultra fast recovery rectifier for general purpose DO-2144 x Metalfilm resistor 0.4W-1%-1M-RoHS5 x Real Time Clock/Calendr DIL-181 x E10 Globular lamp ø11 x 23mm - 6V/350mA1 x Silicon Diode 100V 3A DO-2011 x Crystal 5.000Mhz - HC 49/U dim. W11.05 x D4.7 x H13.5mm1 x 10 pcs Carbon Film resistor 1/4W 5% - 1.2E2 x Micro-Fit 3.0 Male housing connector 8-polig1 x Zenerdiode 225mW 6.2V SOT-233 x Pos. Reg. 12V 1A TO-2202 x Elco Radial 4,7uF/50V bipolair1 x PNP 25V 100mA 300mW TO-921 x Carbon film resistor 3W ø6,5x17,5mm 5% - 220K1 x Dil reed relay 1xmake 12Vdc - 1000E4 x N-fet-dg 20v 30ma .2ghz 2 SOT-1032 x KM4132G271BQ101 x NPN 20v 1a 0.8w 100mhz3 x DIN socket - 6-pole print right-angled - Lumberg1 x Amidon Powder iron toroides 8µ - 2-50 Mhz7 x Stereo Decoder DIL-1413 x IC socket gold plated machined dil 14p e=7,62mm5 x SI-N 180V 150mA 800mW TO-56 x Dual Very Low Nois Opamp. DIL-84 x hex inv buff driv op. col DIL-167 x Transistor socket 8 contacts3 x SI-P 160V 1.5A 20W TO-2208 x p-darl 40v 0.4a 0.625w3 x Quad 2 Input Schmitt Trig.NAND5 x Sub-Miniatur Toggleswitch, 1-pole on-on3 x Choke coil radial 470uH barrel blue2 x Optotriac 3,75kV Uin max:400V zonder nuldoorgangs-detectie DIL-65 x 7 Seg. Numeric led display2 x Fuse ø5x20mm slow-blow - 500mA / 250V2 x 4 Bit Bin. Up/Down Counter7 x RCA panelmount receptable - red2 x 3-to-8 Line Inverting Decoder/Demultiplexer DIL-162 x decade counter DIL-143 x Pos. Reg. 15V 1A TO-2203 x Neg. Reg. 5V 1A TO-2205 x arco429 - 80 - 400pF - 20x10mm1 x Gate / Inverter Logic IC SO-146 x 60 V, 115 mA, small signal MOSFET1 x FUSE, FLUKE SPARE 1100V 400mA Size: 35 x 10.3mm1 x PNP 50v 0.2a 0.5w TO-921 x PNP 30V 0,1A 0,5W TO-921 x SI-N 140v 12a 80w 15mhz TOP-31 x Elco radial 2200uF/16V 12.5x25mm e=5mm 105° Low ESR1 x 10 pcs Carbon Film resistor 1/4W 5% - 18E2 x TR5 Fuse Slow 800mA1 x Kenwood PKT-23E Mini Catering industry1 x Metalfilm resistor 0.4W-1%-180E-RoHS2 x Buffers en lijnbekrachtigers Dual Comp Inverter DIL-143 x Transistor socket 3 contacts2 x 9W Wirewound resistor 33E 10% 9x9x38mm Vitrohm - RoHS1 x Hand microphone 8 pole1 x Metalfilm resistor 0,4W-1%-390E1 x GE-N 15V 1A 220mW TO-11 x Trimmer top adjust Ø 10mm 50K1 x Tantalum Capacitor 0,68uF/25V e = 52 x Printing pen ø1.0x10mm silver plated14 x Replace tip for Solderstation 20-30, Ø 5.3MM - Ø 2MM2 x Mini Gender 9Pol.Female/Male2 x Elco radial 1000uF/35V 13x20mm e=5mm1 x Carbon film resistor 3W ø6,5x17,5mm 5% - 18E1 x Double Blncd. Mixer/Osc. DIL-81 x Styroflex Capacitor. 39PF - 160V - 1% - SIEMENS - 3X8mm - AX1 x VGA Monitor HQ Cable Male 15polig HD - HD 15polig Female 1.8mtr5 x Ceramic. multilayer 100nF 50V X7R 10% e=5,0mm1 x Ferrite choke inductor, 2½ turns, Z=680 ohm @ 100MHz2 x PNP 45V 100mA 300mW T0-921 x Heatsink 42x25.4x25mm with TO-220 drill Black2 x Elco radial 0,1uF/100V 5x11mm e=2,5mm 105°2 x Alan 121 CB transceiver 40 Multi Channels FM/AM  2 x SI-P 60V 100mA 250mW TO-9212 x SI N-Chnl. FET 30V 250mW TO-921 x Metalfilm resistor 0,4W-1%-1K211 x 10 pcs Resistor 1206 - 511E2 x SI-N 120V 50mA 500mW TO-922 x 5.74 Mhz Discriminator3 x 1Mbit (128Kx8) LATCHED EEPROM PLCC-321 x RCA female connector - 6.3 mm mono jack - RoHS1 x Antenna connector PL to DV1 x NPN darlington power transistor 60V 8A 65W TO-2201 x Lightweight Headset1 x Transistor NPN 80V 1.5A 8W SOT-328 x SI-N 30V 30mA 400mW TO-921 x Carbon film resistor 1/2W 5% - 2K71 x SI-N 25V 150mA 700mW TO-51 x Zenerdiode 20W 200V SOD-641 x Fuse ø5x20mm slow-blow - 1A / 250V1 x TNC Male Crimp type RG58U1 x Antron A99 Base CB Antenna 1/2 Fiber Glass Whip, 550cm, 2000W1 x Mini Gender 9Pol.Female / Female1 x Device Connector 16A 3P female flat cable connector pins1 x Neosid Choke3 x PNP 30V 0,1A 0,5W TO-921 x NPN 20V 100mA 300mW SOT-252 x NPN 45V 100mA 500mW TO-921 x Carbon film resistor 3W ø6,5x17,5mm 5% - 15E1 x 10.7 MHz Filter 3pens2 x GE-P 15V 10mA 60mW TO-721 x Chassis 3.5 mm stereo switch to open - Marushin - RoHS1 x SI-N 20V 100mA 300mW TO-182 x PTC B59995-C120-A70 30V 13E - Epcos - RoHS1 x RJ-45 CAT6 plug shielded with wire guide and tulle1 x Pig nose ferrite 2 holes 14x14x8mm Hole large Ø3.4mm1 x Elco axial 470uF/16V ø10x25mm1 x 10 pcs Carbon Film resistor 1/4W 5% - 2K71 x SI N-Chnl.Fet 25V 60mA TO-923 x NTC ø5,5mm max. 10% - 150E1 x Pos.Low Drop.Adj.Reg.3A TO-2201 x Coupler1 x Elco Axial 470uF/50V ø12.6x31mm 105°1 x NPN 45V 100mA 300mW TO-183 x Antan III pcb's and components2 x Carbon film resistor 1W 5% - 10K2 x Dual N-Channel JFET2 x Heat Shrink various sizes ø1 - ø2 - ø3 - ø4.5 - ø6 - ø9mm1 x 9W Wirewound resistor 6K8 10% 9x9x38mm Vitrohm - RoHS6 x MKT Capacitor 100nF/63V 5mm2 x 10 pcs Capacitor 1206 - 33pF4 x Low frequency power silicon NPN transistor 70V 2.0A TO-661 x RCA connector metal with cable protector - black2 x N-fet-dg 20v 30ma 800mhz SOT-1431 x SMA Male to BNC Female speciaal voor portofoons1 x 14-stage binary counter DIL-162 x NPN 80v 0.2a 0.5w TO-921 x Diode schotty 1A, 20V DO-2047 x MKT Capacitor 330nF/63V 5mm1 x SI-P 45V 100mA 300mW TO-182 x Diode Voltage regulator 1W 3V6 SOT-893 x 10 pcs Resistor 1206 - 1E1 x IC socket gold plated machined dil 24p e=7,62mm1 x Soldering tip cleaner Abrasive brass wool2 x Dual General Purpose Op Amp SO-82 x Gebra TORX screwdriver TX9 (9mm)2 x SI-P 45V 100mA 300mW TO-182 x Varistor SIOV - S07 K230 230V 0,25W ø9,0x4,0mm2 x Metalfilm resistor 0,4W-1%-15E2 x Fan 120X120X38MM 230Vac plain bearing 43dBA Sunon1 x Benchtop power supply with fixed voltage 13.8V 10 Amp (12A peak)1 x UHF Double Female1 x Banana plug ø4mm with cross hole - Black1 x Panelmount 6P4C angled1 x Elco axial 10uF/100V ø8x11mm1 x SI-N 50V 200mA 300mW TO-92klein1 x Zenerdiode 350mW 16V SOT-231 x Miniature PCB relays SPDT 12VDC - 6A - 1x maak2 x BXL football wireless mouse USB 800 DPI2 x Precision Voltage Reg. DIL-141 x LTE Mobile Transceiver, Wide Coverage Over LTE, 4G, 3D Network2 x Trimmer side adjust 10mm 4K72 x DIN mounting for President Walker-2 , Richard2 x Varistor SIOV - S10 K175 175V 0,40W ø12,0x4,6mm1 x Fuse ø6,3x32mm fast-acting - 1A3 x JFET Opamp. 4MHz 6÷36V 1 Channel DIL-82 x -0.5 to +7.0V; 30mA; 12-bit successive approximation register3 x NPN 50V 0,1A 0,3W 300MHz TO-182 x Metalfilm resistor 0.4W-1%-27K1 x Dual Low Noise Opamp. DIL-81 x NPN 30V 0,1A 0,5W TO-922 x Mustard 0,18uF 180nF 400V= +/-10% ø11x 30mm1 x NPN 45V 200mA 390mW TO-182 x SI-P 100V 2A 30W TO-2202 x CB Amplifier 12-14VDC, 25-30Mhz 200W1 x Measuring pen ø4mm - black1 x 10 pcs Carbon Film resistor 1/4W 5% - 22K1 x Multistandard VIF-PLL with QSS-IF and AM demodulator1 x Pushbutton switch miniature (NO)- ø7mm- solder - green1 x 220V AC Cable 4 x 1mm² Black Round p/mtr1 x CR1220, Ø12.5x2.0mm, 3.0V, DL1220, BR12201 x Elco radial 470uF/35V 10x17mm e=5mm 105°2 x Crystal 14.318Mhz - HC 49/U dim. W11.05 x D4.7 x H13.5mm1 x SI-N Transistor NPN 60V 100mA 250mW TO-922 x CB Mobile Mount DV27, Whip Fibreglass Black, Length 62cm, 20W1 x 18 Stage Static Shift Register DIL-141 x Incotech DZZ14-J2 Earphone D shell, with 2.5mm Right Angle 40cm1 x WAGO Welding clamp mini 5-way mini 5x0.5-2.5 (0.50 - 2.50 mm²)1 x MKT Capacitor 47nF/100V 7,5mm2 x Micro-Fit 3.0 Female crimp terminal AWG20-241 x Buzzer 3-28Vdc, 7mA, 85dB at 12Vdc, wire connector1 x NPN transistor VHF band amplifier SOT-231 x Power cord with molded plug2 x Elco radial 220uF/35V 6.3x11mm e=5mm 105°1 x si-n 30v 3a 10w TO-1269 x Replace tip for Solderstation 20-30, Ø 5.3MM - Ø 0.5MM1 x Metal film resistance 0.4W-1%-50ppm ø1.6x3.6mm - 1.5E1 x Metalfilm resistor 0,4W-1%-270K4 x Zenerdiode 500mW 6V8 SOD-80C1 x SI N-Chnl. FET 30V 300mW TO-921 x Thyristor 500V 0.8A TO-922 x Metalfilm resistor 0,4W-1%-12K1 x Transistor NPN 300V 2A 35W TO-661 x IC socket gold plated machined dil 8p e=7,62mm1 x 10 pcs Resistor 0805 - 12M1 x Triac 600V 8A1 x K60 contact cleaner with lubricating and anti-corrosion effect1 x Cable Jack 3.5 Stereo Male - Jack 3.5 Stereo Female 2mtr2 x Elco axial 680uF/40V ø12,5x30mm1 x SWR cable 90cm with on both sides a PL plug2 x Coil resistormodel 10uH 10%1 x Coil, 91169, size:Ø 102 x v-comp 1x 36v 200ns oc DIL-81 x Metal film resistor ø1.6x3.6mm 0.4W-1%-10M1 x 6x inverting buffer DIL-141 x TV Male to RCA Phone Female2 x TR5 Fuse Slow 500mA - RoHS1 x Carbon film resistor 1/2W 5% - 3.3E1 x Elco radial 470uF/25V 10x12,5mm e=5mm 105°1 x Tulip plug metal with tulle - red - Lumberg - RoHS2 x Dual Rail to Rail Opamp. DIL-81 x Elco radial 220uF/35V 10x17mm e=5mm 105°1 x Lightweight Headset with Boom Microphone & PTT2 x USB 3.0 Memory Stick 64GB 80 Mbps read / 10 Mbps write2 x PTC B59985-C120-A70 30V 4,6E - Epcos - RoHS3 x Crimping pin flat plug 2,8mm Red Male1 x Fuse ø6,3x32mm slow-blow - 12A1 x Fuse ø6,3x32mm slow-blow - 2A1 x Octal D Transparent Latch TS DIL-201 x Cable Jack 3.5 Stereo => 2xRCA 3m1 x Micro-Fit 3.0 Male housing connector 4-polig3 x Trimmer top adjust Ø 10mm 10K1 x Fuse ø6,3x32mm fast-acting - 25A1 x 120pF 500V ±1% Unelco Metal Clad Capacitor1 x D-Sub connector PCB angled 2,54mm receptable - 25-pole2 x Alps RK09710EL006, Vertical with pusch, 15Det, ø6mm,1 x Tantalum Capacitor 10uF/25V 20% e=2,51 x Labory socket panelmount ø4mm - white4 x NPN 20V 100mA 300mW SOT-252 x BC-119N Attachement for IC-M11 x Fuse ø5x20mm slow-blow - 12A / 250V1 x Mini UHF Female Bulkhead Long1 x 12-stage binary counter DIL-161 x unidir transil 300v 1500w DO-2011 x 8-chn analog mux/demux1 x Universal single USB charger, ideal for charging oaMP3, etc1 x Quad 2 Input NAND Gate OC2 x Tantalum Capacitor 1uF/25V e=2.51 x NPN 30V 0,1A 0,5W TO-921 x Elco radial 0,22uF/100V 6,3x11mm e=2,5mm 105°1 x Fuse ø5x20mm fast - 63mA2 x Amidon Powder iron toroides 20µ - 0.2-10 Mhz1 x Styroflex Capacitor. 10PF - 160V - 1% - SIEMENS - 5X11mm - AX1 x RCA panelmount receptable gold-plated - red1 x Safety Labory socket panelmount ø4mm - yellow1 x Styroflex Capacitor. 11PF - 500V - 1% - EMZ - 3.5X11mm - AX2 x Metalfilm resistor 0,4W-1%-162E1 x Si PNP LP HF 45V TO-1051 x Hex Schmitt Triggers SO-143 x Quad 2 Input NAND Gate Dil-145 x Trimmer mini small horizontal 1-turn ø6,3mm Carbon 10K1 x SMD electrolytic capacitor Radial Can 100uF 6V (Ø6.3mm x5.4mm)1 x Throat microphone for PMR handheld transceiver including Kenwood1 x Zenerdiode 400mW 18V SOD-271 x 10 pcs Mini Resistor 1/8W SFR16T - 5% - 3K94 x Hex Bus Driver 2 Enable Inp.TS1 x Ceramic capacitor 22nF e=5,08mm1 x PNP 30V 0,1A 0,5W TO-926 x Adator for 6mm to 4mm shaft7 x GE Diode 60V 25mA1 x PNP 25V 200mA 390mW TO-181 x 8 bit Universial Shift Reg. TS1 x 10 pcs Carbon Film resistor 1/4W 5% - 150E3 x Ceramic. multilayer 47nF 50V X7R 10% e=5,0mm2 x SI Varicap 28V 4-5.6pF1 x Mounting Wire Solid ø1,0mm² 900V - black p/m2 x PNP 45V 800mA 625mW TO-921 x BIPOLAR TRANSISTOR, NPN, 250V (BJT) 150W CASE-340AB1 x Coil, 100-077-83103, size: 10x10mm2 x 10 pcs Carbon Film resistor 1/4W 5% - 10K2 x President Walker 2 CB transceiver 40 Multi Channels FM/AM1 x NPN 30V 100mA 3005mW 250Mhz TO-921 x Twist drill HSS - DIN 338 - ø0.7mm (p / pc)1 x Uniden bag for UBC125XLT and UBC75xlt1 x Tantalum Capacitor 10uF/35V 20% e=2,5 - RoHS1 x opamp 2x +-22v 3mhz 1v/us Sil-81 x SI-N 40V 20mA 100mW TO-921 x 8 Input NAND Gate2 x Opamp 1x 18v 1mhz decomp DIL-81 x CR2320, Ø23,0x2.0mm, 3.0V, DL2320, BR2320, KL2320, L2320, L262 x Tantalum Capacitor 4,7uF/16V 20% e=2,5 - RoHS2 x Precision Voltage Reg. 2-37V 0.15A DIL-141 x Coil 79024 afm:7x7mm1 x Potentiometer mono-lin ø6mm metal shaft - 10K2 x Coil resistormodel 2,2uH 10%1 x Dual 4 bit Bin. Ripple Counter SO-141 x Crystal 14.725Mhz - HC 49/U dim. W11.05 x D4.7 x H13.5mm3 x Transistor socket 4 contacts1 x Alu Clear Anodized encloser (LxBxH) 220x165x51,5mm1 x 6.3 mm stereo jack plug metal right angle - RoHS1 x 10 pcs Mini Resistor 1/8W SFR16T - 5% - 1K51 x Varistor SIOV - S07 K175 175V 0,25W ø9,0x4,0mm1 x Trimmer top adjust Ø 10mm 100K1 x Speaker 5W 8 Ohm, with holder and cable with 3,5mm jack plug.1 x Elco radial 22uF/63V 6.3x11mm e=2.5mm 105°1 x Spacer plastic M3 - 30mm - black1 x Opamp. 22V Temperature Range:0°C to +70°C, DIL-81 x Metalfilm resistor 0,4W-1%-301E1 x DAB + Antenna 1mtr long and 4cm thick (F-connector)1 x Dual, AM-Tuning, 32V, 42..47,5pF(2V) 20V3 x Quad 2 Input NOR Gate DIL-142 x TR5 Fuse Slow 630mA3 x Varistor SIOV - S10 K60 60V 0,40W ø12,0x4,0mm1 x dual btl power driver DIL-168 x Heat sink pasta 1 gram1 x Zenerdiode 3.25W 12V SOD-571 x N-Chnl.MOSFET 20V 40mA SOT-1031 x Elme Nylon-Glass desoldeerpomp with internal bayonet point.1 x PNP 20V 100mA 300mW TO-181 x Multifuse 30V 2300mA - Bourns1 x Elco axial 220uF/63V ø10x30mm1 x Reed contact 0.25A/3W 1xmake ø2.54x14.0mm1 x Voltage Controlled Amp. SIL-81 x DIN mounting for President Harry31 x 10 pcs Carbon Film resistor 1/4W 5% - 8.2E1 x SI-P 250V 16A 250W TO-32 x SI-P 30V 100mA 200mW TO-922 x SI-P 120V 1A 10W TO-1261 x Aluminium enclosure 143x72x43mm - Teko1 x Quad Bitateral Switches DIL141 x Single-Phase Full-Wave Bridge Rectifier 400V 25A1 x Metalfilm resistor 0,4W-0,1%-20K0-RoHS1 x Tantalum Capacitor 2,2uF/35V 20% e=51 x Si PNP Power3 x Loose soldering iron for soldering 20/301 x Dipswitch 8-polig1 x +20 to - -1.0V; +-100mA; ; electronic telephone circuit1 x Elco radial 10uF/35V 5x7mm e=2mm 105°( 35ZLG10MEFC5X7 )2 x dual jk flip flop DIL-141 x Zenerdiode 400mW 12V SOD-271 x Fan 30x30x10mm 12Vdc 7.8m³ / h 20dBA Sunon vapolager1 x Sponge for KH-20 Solder Standard 522 420 991 x Metal film resistance 0.4W-1%-360K1 x Neon indicatorlight 12x16mm 230V - orange11 x Neg. Reg. 24V 0.1A TO-921 x Reed contact 0.25A/3W 1xmake ø3x15.0mm1 x Varistor SIOV - S20 K175 175V 1,00W ø21,5x5,0mm1 x USB 2.0 Webcam Full HD resolution and stereo microphone1 x Tabletop DAB+ / FM radio with 20 preset stations1 x Trimmer top adjust Ø 10mm 10M2 x President Johnson CB transceiver 40 Multi Channels FM/AM  1 x Elco radial 68uF/400V e=7,5mm 105°1 x Twinaxial Male Terminator 50 Ohm2 x Varistor SIOV - S20 K60 60V 1,00W ø21,5x4,4mm1 x Bridge 380V 0,8A ROUND (afb.R) ø9x5,1mm1 x Elco radial 47uF / 25V ø5x11mm e = 2.5mm 105°1 x Fuse ceramic 5x20mm Slow 6.3A/250V8 x Replace tip for Solderstation 20-30, Ø 5.3MM - Ø 3MM 45°.1 x NPN 45V 0,1A 0,25W SOT-231 x Elco radial 100uF/50V 8x11.5mm e=3.5mm 105°1 x SI N-Chnl. FET 30V 250mW TO-921 x Tantalum Capacitor 2,2uF/25V e=2,5 - RoHS1 x Ceramic capacitor 22nF e=2,54mm1 x Crystal 25.000Mhz SMD HC49SM dim.W11,2 x D4,85 xH3,5mm1 x SWR cable 45cm with on both sides a PL plug2 x Voltage References uP Volt Ref 1.2V, +/- 0.3% TO-921 x SI-P 150V 8A 50W TO-2202 x Japanese potentiometer 5K mono-linear with serrated shaft2 x si-n 150v 50ma 5w 200mhz TO-1264 x Varistor SIOV - S10 K50 50V 0,40W ø12,0x3,9mm2 x Elco Axial 47uF/250V ø18x30mm 85°1 x Coil, 150-9689452, Dimension: 7x7mm,Uitgesoldeerd1 x PTC B59935-C120-A70 30V 0,3E - EPCOS1 x Diode fastrecovery 1A 200V DO-411 x N-Chnl. J FET 50V 10mA TO-921 x SI Varicap 28V 2.0-2.3pF1 x Varistor SIOV - S07 K460 460V 0,25W ø9,0x5,7mm1 x 10 pcs Carbon Film resistor 1/4W 5% - 68E1 x Metalfilm resistor 0,4W-1%-3K31 x Heatsink 34,9x25,4x11,5mm with TO-220 drill Black - Isolated2 x Mini-DIN plug plastic - 8-pole1 x 12BIT DAC, SPI, VREF, DUAL, DIL-81 x BNC Male Double Crimp type RG58U1 x Arrow for KNP 15B - black2 x SI-P 60V 600mA 800mW TO-181 x monostable multivibrator DIL-141 x Componeten bending former1 x Metal film resistance 0.4W-1%-50ppm-ø1.6x3.6mm - 2E1 x Automatic fuse - 4A - 250VAC1 x Trim tool, Bourns1 x Metalfilm resistor 0,4W-1%-18E1 x Anti-static wrist strap with cord and alligator clip2 x 500 Channel portable scanner Freq.25-960 Mhz (cycling races)1 x SI-P 100V 6A 65W TO-2201 x No keypad and no Display VHF Handheld1 x Ceramic capacitor 1,2nF e=2,54mm2 x 10 pcs Carbon Film resistor 1/4W 5% - 120K2 x Carbon film resistor 1/2W 5% - 10K1 x 32K x 8 SRAM 20nS DIL-28 smal1 x 3-STATE Octal Buffer DIL-202 x GE Diode 50V 50mA = aa119 DO-351 x Elco radial 3300uF/25V 16x26mm e=5mm 105°2 x Neg. Adj.Volt.Regulator TO-2201 x Print board Slow Blow fuse radial 10A 250Vac2 x Trimmer 25 turns side-adjust SIL - 200E1 x Wirewound resistor 3W 5% - 12E1 x Resistor 5W 0,12E 10% Low-Inductance e=10mm1 x NPN Transistor 50v 0.8a 0.625w 150m TO-921 x Elco radial 100uF/35V 6,3x11mm e=2,5mm 105°1 x voltage doubler 500v 10a2 x 8BIT MCU FLASH,Flash:4KB ,RAM:128Byte , DIL402 x President Teddy CB transceiver 40 Multi Channels FM/AM ASC  1 x Semiconductor1 x Amidon Ferrite Toroids 10µ - 1-30 Mhz1 x Band-switching diodes 35V 100mA DO-342 x 1 x Metalfilm resistor 0,4W-1%-75K1 x DIN mounting for Midland Alan 48+Multi, Excel Multi1 x Japanese potmeter 10K mono-linear with serrated shaft1 x Labory plug ø4mm - black1 x Gutter bracket stainless steel for antenna1 x Metalfilm resistor 0,4W-1%-7E58 x Diode 100V/150mA DO-351 x Carbon film resistor 1W 5% - 120E1 x SI-N 20V 100mA 300mW TO-182 x Bourns Cermet trimmer 25-turn top-adjust 1K QIL (3296Y-1-102)1 x 10 pcs Resistor 1206 - 100K1 x Printed circuit board single sided 10x16 cm2 x OPTO SWITCH, REFLECTIVE, 1 Channel1 x Ceramic capacitor 680pF e=2,54mm1 x Ceramic. multilayer 22nF 50V X7R 10% e=2,5mm1 x Small Signal Transistors TO-921 x Coil, 154AN7A6441,10EZ SW2, Osc, green, Q=70, L/C=5uH, 10x101 x Elco radial 4.7uF 25V ø4x5mm e=1.5mm 85° (MCUMR25V475M4X5)2 x Fuse ø5x20mm fast - 32mA1 x D-Sub connector PCB 2,54mm receptable straight - 25-pole1 x Electromagnetic Buzzer Continuous 90dB 500Hz 8-16VDC1 x Ceramic. multilayer 120pF 50V NP0 5% e=5,0mm1 x 1 to 8 Line Decoder/Demultipl.1 x Heatsink 13,5x19,1x9,5mm -black1 x Hex inv. buffer DIL-161 x 5.5 MHz Filter 3pens1 x SI-N 100V 2A 50W TO-2202 x UHF Female to RCA Plug1 x RF Transceiver, 10.7MHz RF Frequency, 9V|12V Voltage, FM SO-201 x PAL Female Quick to RCA Male1 x Lamp Ba9S socket ø10 x 28mm - 18V/100mA1 x SI-P 80V 1.5A 8W1 x DC plug 2.5mm short1 x Satellite dish 88cm1 x Alan 48 Pro CB Transceiver 40 Multi Chan. FM/AM 1W/4W 12/24V2 x Multi wonderspray kontact 401 x Pro Soft TORX screwdriver TX30 with hole3 x Very pure Isopropanol for cleaning including circuit boards, etc3 x 8-input multiplexer DIL-161 x Lamp Ba9S socket ø10 x 28mm - 240V/14mA2 x Halogen G4-G6 fitting cap ø17mm with flange and wire1 x SI N-Chnl.FET 30V 10mA TO-721 x 4 Way car splitter 12V + USB1 x Styroflex Capacitor. 15PF - 500V - 1% - EMZ - 3.5X11mm - AX1 x Potentiometer mono-log ø6mm metal shaft - 5M1 x Metalfilm resistor 0,4W-1%-5K621 x Ceramic capacitor 22pF 100V NP0 e=2,54mm2 x 10 pcs Carbon Film resistor 1/4W 5% - 1K1 x Fuse ø6,3x32mm slow-blow - 8A1 x 3-wire lapel mic with earphone1 x Set of 10 jumper cables 1x Female en 1x Female 15cm1 x Ceramic. Multilayer Axial 10pF 50V1 x Labory socket panelmount ø2mm - yellow1 x Serial Cable D-sub 9 pins Male => Female D-sub 9 pins 30.0m1 x Metalfilm resistor 0,4W-1%-1,3E1 x Cable strain relief ø5-6,8mm, drill hole ø10mm - black1 x Extension cable 220V 3x1.5mm² 3mtr White with protective earth1 x 5-stage decade cntr/divid DIL-161 x Varta 4906 1.5V Ø14,5X50.5mm AA, Mignon,LR6, Penlite1 x Bridge Rectifiers 1000V 2A SO-4 (afb.S)1 x SI-N 80V 500mA 625mW TO-921 x 1.5kV Vcbo, 1.5A Ic Low frequency power silicon NPN transistor1 x Diode 200V/1A DO-411 x Jack plug 2.5 mm mono plastic odds - Marushin - RoHS1 x Styroflex Capacitor. 1NF -150V -CA20% -4.5X10mm -AX1 x Jack chassis part 6.3 mm mono Geisol. with built-in switch1 x Coil, 291CN-T1071-93506, size: 7x7mm1 x Incremental Rotary Encoder,100 rpm, 24 Detents, 24 Pulses, Pusch1 x Trim screwdriver cross PO 2x15 Ceramic Blade1 x Labory socket panelmount ø4mm - black1 x Triac 600V 8A 20ma TO-2201 x Trimmer side adjust 15mm 5K1 x BCD-Output Decade Up Counter SO-161 x Serial Cable D-sub 9 pins Male => Female D-sub 9 pins 25.0m1 x Elco radial 2200uF/40V 16x35mm e=7,5mm 105°1 x Brass spacer M3 int/ext, length 15mm1 x Elco radial 10uF 16V ø4x5mm e=1.5mm 85° (MCUMR16V106M4X5)3 x Power, General Purpose TO-31 x RP-TNC Male to SMA Female.1 x Spade terminal 6,0mm Red1 x Battery clip for 9V battery I version1 x Edge wheel for PT15 red - Piher1 x NPN 45V 100mA 300mW TO-921 x Bourns Cermet trimmer 25 turn top-adjust 5K SIL (3296W-1-502)2 x Solder lug M3 twofold -silvered1 x 4 bit Magnitude Comparator DIL-161 x 7/16 DIN Male Clamp type ECOFLEX 15 PLUS1 x Ø8mm green diffused 565nm 55mcd2 x Quad 2 Inp. OR Gate2 x Elco axial 100uF/25V ø8x11mm2 x Dual Diff. Line Driver4 x PNP 30V 0,1A 0,5W TO-921 x Butt disconnector Yellow1 x NPN Transistor 3.0A 40-80V 12.5W TO-1261 x si-d 75v 0.2a/0.45ap 4ns DO-351 x Metalfilm resistor 0,4W-1%-110E1 x Dual Opamp. SIL-81 x Set consists of a 2 x Throat Microphone and 2x Kenwood TK33011 x Intelligent Power Switch, Off Line Switcher, 9W, 7-Pin, SO-81 x Chassis section single-gage panel mounting ex 5.5 / inw 2.5mm1 x si-n 15v 30ma 5ghz 19.5db SOT-371 x Elco radial 47uF 6.3V ø4x5mm e=1.5mm 85° (MCUMR6V3476M4X5)1 x Triac 400V 3A TO-2201 x Ledholder neglected reflector 8mm2 x 4.5 Mhz Discriminator1 x Inverting HEX Buffer OC1 x opamp 2x 1mhz 0.3v/us DIL-81 x Metal film resistance 0.4W-1%-620K1 x GE-P 15V 10mA 60mW TO-721 x Elco radial 10uF/100V 6,3x11mm e=2mm 105°2 x Ceramic. multilayer 68nF 50V X7R 10% e=5,0mm1 x Print transformer EI48 10VA/230V - 2x18V/278mA BV EI 481 11921 x PNP Transistor 60V 5A 65W TO-2201 x PNP 20V 100mA 300mW TO-921 x 10 pcs Mini Resistor 1/8W SFR16T - 5% - 1M1 x Bourns ECW 1J-B24-BC0024-L, Encoder 24-detents 24-cycles1 x Audio Power Amp. Vcc 16V DIL-81 x N-Chnl.MOSFET 500V 2.5A TO-2201 x Coil resistormodel 100uH 5%1 x Automotive bladefuse 10A - red1 x Zenerdiode 3.25W 9V1 SOD-572 x Strobe lamp trigger coil for 6KV Radial1 x Motor run capacitor 1uF 400Vac 31.5x24.5x15mm e=27.5mm1 x Aluminium enclosure 102x72x43mm - Teko1 x Elco axial 47uF/100V ø8x18mm1 x Metalfilm resistor 0.4W-1%-20K-RoHS1 x SI-N 100V 12A 80W TO-2201 x PCB relay 12Vdc 1x change 10A - 400 Ohm1 x Potentiometer with ø6mm schaft plastic stereo-lin 10K1 x SI-N 50V 100mA 300mW TO-921 x 10 pcs Resistor 1206 - 4K71 x 10 pcs Resistor 1206 - 560K1 x Solder lug M2 triple1 x Octal Inverting Buf./Linedrive1 x N-Chnl.MOSFET 200V 18A TO-2201 x SI-N 30V 30mA 250mW TO-921 x Microphone cable flexible black 2 x 0.08mm² ø 3mm p/mtr1 x D-Sub connector plug solderversion - 37-pole1 x 10 pcs Resistor 1206 - 1K51 x Coil, 113SN2K256, size: 7x7mm1 x Fixed Positive Voltage Regulator TO-220-61 x Dual band radio 144-146 and 430-440Mhz Incl. 3600Mah Battery1 x Charge two smartphones or tablets under 2-Outputs 2.4A1 x RCA receptable metal - black1 x 9W Wirewound resistor 12K 10% 9x9x38mm Vitrohm - RoHS4 x Elco radial 330uF/63V 13x21mm e=5mm 105°1 x SI-N 80V 2A 10W TO-2208 x GE Diode 140V 50mA1 x VCR/VDP RF Modulator DIL-141 x 10 pcs Carbon Film resistor 1/4W 5% - 5K61 x N-Chnl.MOSFET 200V 18A TO-31 x AC/DC Converters 15W 85-265VAC 19W (230 VAC) SO-8 (7pins)3 x Dual 4 Inp. NAND Gate DIL-148 x Quad 2 Inp. NAND Gate DIL-141 x Carbon film resistor 1/2W 5% - 100K2 x 10 pcs Resistor 0805 - 22M2 x 9W Wirewound resistor 0.22E 10% 9x9x38mm Vitrohm - RoHS1 x Ceramic capacitor 1pF 100V NP0 e=5,08mm1 x SI-P 45V 100mA 500mW TO-923 x SI Varicap 28V 1.8-2.8pF1 x 1 - 15 MHz / 5uH3 x Neg. Adj. Volt. Regulator TO-31 x TV Sound IF Amp./Demod. DIL-141 x Alps EC12E2420404, VERTICAL, 24 Det, 24-cycles, 2 Channel2 x Dual Monostable Multivibrator DIL-164 x Elco radial 47uF/100V e=2,5mm 105°1 x Choke coil radial 100mH barrel black smooth3 x Coil resistormodel 1,2uH 10%1 x 10 pcs Carbon Film resistor 1/4W 5% - 100K1 x IEC Device 220V Straight plug RA cord and Straight contra 3mtr1 x ø3mm Low Current (2mA) red diffused 627nm 2.8 mcd1 x Carbon film resistor 1W 5% - 10E1 x Bone Mic headset inline PTT/Mic. for Icom F1000, F40293 x Neg. Reg. 5V 1A TO-2201 x Ceramic capacitor 2,2pF e=2,54mm1 x Balun 1,2 KW 1:1 (1.7-40Mhz)2 x Diode AFC,15V, 20-25pF, <1.5Ohm1 x 4-bit bi-stable latch DIL-161 x hex buffer1 x Enhanced precision quad DIL-142 x SI-P 20V 2A 1W TO-921 x TR5 Fuse Slow 1A1 x Built-in mounted socket outlet with cover 220V 16A RA Black IP441 x Carbon film resistor 3W ø6,5x17,5mm 5% - 220E1 x Compact speaker microphone TK-2000, TK-30001 x Choke coil radial 56mH barrel gray smooth1 x Rocker switch cord brown 4Amp1 x Coil resistormodel 12uH 10%1 x Dot/Bar Display Driver DIL-181 x Styroflex Capacitor. 50PF - H - 2.7X7.5mm - AX1 x Micro-Fit 3.0 Female housing connector 6-polig1 x Ceramic capacitor 10pF 100V e=2,54mm1 x SI-P 180V 70mA 900mW TO-921 x SI-P 100V 10A 70W TO-2201 x Eurocard 100x160mm full line1 x Ceramic capacitor 820pF e=2,54mm1 x opamp 2x 36v 1mhz 0.8v/us DIL-81 x Foil Trimmer 5.5 - 15pF 3pins Grid 10mm blue1 x SI-N 180V 1.5A 10W TO-1261 x Spindle 35mm for PT15.. black - Piher1 x Pressure switch switch On-OFF mounting hole ø12mm 250V 1Amp red1 x Metalfilm resistor 0,4W-1%-30K1 x TV Sound-IF FM-IF Demod. DIL-161 x 10 pcs Resistor 0805 - 680K1 x TV Male (Screw type)1 x 10 pcs Resistor 1206 - 39K2 x Dual D Flip-Flop1 x FME Male to TNC Male ( Amphenol connex 192105 )1 x Clock Driver SO-341 x Dual Very Low Noise opamp 2x 44v 10mhz 9v/us DIL-81 x MKP Capacitor 100nF 275VAC, R 15mm R.46.KI.3100M11 x Carbon film resistor 1/2W 5% - 68E1 x Potentiometer mono-lin ø4mm metal shaft - 10K1 x Transistors Darlington NPN Power Darlington 100 V 8Amp TO-2201 x SI-N 60V 15A 90W TOP-31 x 10 pcs Carbon Film resistor 1/4W 5% - 3K91 x Potentiometer with ø6mm schaft plastic stereo-lin 100K1 x Ceramic. multilayer 220nF 50V X7R 10% e=5,0mm1 x Clip microphone with Earphone and PTT1 x UHF DMR Mobile1 x IC socket gold plated machined dil 20p e=7,62mm1 x Resistor Network 8x47K SIL-91 x GE Diode 25V 30mA DO-2041 x Fuse ø6,3x32mm slow-blow - 15A1 x SI-N 50V 500mA 800mW TO-51 x MOSFET, N CH, 60V, 55A, TO-2201 x Quad 2 Input Schmitt Trig.NAND1 x Toggleswitch miniatur ø6,35mm 4-pole on-off-on1 x si-d 200v 3a/70ap 250ns1 x N-Chnl. J FET 25V 100mA TO-921 x SI-N 60V 1.5A 8W TO-1262 x N-fet 60v 0.3a 0.8w 5r TO-922 x quad 2-inp and gate DIL-141 x GP 1300mAh High performance rechargeble AA batt3 x Varistor SIOV - S20 K230 230V 1,00W ø21,5x5,1mm1 x Heat Shrink ø 12.7 - 6.4mm black p/mtr1 x 1 x 5.5 MHz Discriminator1 x 10.52 Mhz Discriminator3 x Varistor SIOV - S10 K230 230V 0,40W ø12,0x4,7mm1 x Quad SPST Nrm-Opn (Logic Level 0) Ana SW SO-141 x DUAL PRECISION OP-AMP1 x 10 pcs Carbon Film resistor 1/4W 5% - 4K72 x 16 bit Data Select./Multiplex. DIL-241 x Power cord with molded plug1 x Stereo Decoder1 x 10 pcs Carbon Film resistor 1/4W 5% - 220K1 x Microphone cableplug 6 pins Female1 x Heatsink 25x14x15mm with TO-220 drill-pattern M31 x GE-N 18V 1A 1W TO-11 x XLR 3P Female chassis mount met vergrendeling Neutrik1 x Microswitch 5A/250V with long rollever1 x SI-N 45V 1.5A 12.5W1 x Three-terminal positive fixed voltage regulator TO-2202 x SI-P 30V 25mA 250mW4 x 4 bit Parallel Acces Shift Reg1 x SI-N 30V 30mA 250mW TO-921 x Boxheader odds 2.54 mm print 60-pole1 x SI-P 60V 600mA 800mW TO-181 x Amidon Ferrite Toroids 3µ - 30-400 Mhz2 x SI-N 30V 100mA 300mW1 x General Purpose Silicon Rectifier 400V 25A 3Pins SQUARE FASTON2 x RF Schottky Diode Single 4V 110mA 410mV 0.35pF SOD-3231 x NPN 65V 100mA 350mW TO-922 x l processor/deflector3 x NPN 30V 0,1A 0,5W TO-921 x Diode 1000V/1A DO-412 x Octal D Transparent Latch TS DIL-202 x FLIP FLOP LOGIC IC SO-201 x GE Transistor Pair 15V TO-11 x 10 pcs Resistor 1206 - 3,9E1 x 9W Wirewound resistor 22K 10% 9x9x38mm Vitrohm - RoHS1 x Potentiometer stereo-lin ø4mm metal shaft - 2K51 x Elco radial 22uF/50V 6x12mm e=2mm 105°2 x 2K x 8 SRAM 200nS2 x n-fet 60v 0.115a 0.2w 7e51 x Heat shrink tubing ø 9.5 - 4.7mm black p/mtr1 x SI-N 20V 30mA 300mW TO-921 x Printing pen ø1.0x10mm silver plated per 100 pieces1 x SI-N 150V 1A 15W TO-2201 x SI-N 160V 1.5A 20W TO-220iso1 x Nexedge full keypad and Display UHF Handheld1 x Zenerdiode 500mW 4V3 DO-351 x Nexedge full keypad and Display UHF Handheld1 x Zenerdiode 250mW 11V SOT-231 x SI-P 140V 16A 150W TO-31 x Carbon film resistor 1/2W 5% - 1.8E1 x MKP capacitor 470nF 275VAC, R 27.5mm1 x Etching material Natriumpersulfaat 1000 grams (for 4ltr)1 x Potentiometer mono-lin ø6mm metal shaft - 100E1 x Elco radial 220uF/63V 10x20mm e=5mm 105°2 x BCD to Dec. Decoder/Driver OC1 x 120V,50mA high-voltage amplifier transistor SOT-3461 x Ceramic. multilayer 15pF 50V NP0 5% e=5,0mm1 x Zenerdiode 400mW 24V SOD-271 x SI-P 45V 4A 50W1 x Boxheader pcb 2.54 mm 20-pin - Assmann - RoHS1 x Mounting Wires ø0,5mm 10m - white - solid - blister1 x Multiple output voltage regulators1 x VHF Portable Radio1 x 3E2, 4000µ, Ø 4mm, blue1 x SI-P 60V 600mA 800mW TO-181 x NPN 80v 0.2a 0.5w TO-921 x MAR8SM Wideband, DC to 1 GHz Very high gain, 32.5 dB at 0.1GHz1 x Quad 2 Input NOR Gate SO-201 x NPN 30V 0,1A 0,5W TO-921 x AC/DC CONV, BUCK-BOOST/FLYBACK, (7pins) DIL-8
Closed.
Manufacturers
PMR Handy 8 kan. 500mW
PMR Handy 8 kan. 500mW
$200,94 now $105,26
Reviews
BC556B
BC556B
$0,16

nice...