-->rn

Conditions of Use

    OF:
    HAJÉ Electronics
    Oude Kerkstraat 7
    6325EE Berg en Terblijt
    The Netherlands

    Hereinafter to be referred to as: user.

Article 1    Definitions

  1. In the present general terms and conditions, the following terms are used in the sense given below, unless explicitly indicated otherwise.

  2. User: the user of the general terms and conditions.
    Buyer: the user's opposite party, acting in the course of a business or in the course of a profession.
    Agreement: the agreement between the user and buyer.

Article 2    General

  1. The stipulations of the present terms and conditions shall apply to each and every offer and agreement between user and a buyer, to which user has declared the present terms and conditions applicable, insofar as parties have not explicitly deviated from the present terms and conditions in writing.
  2. The present terms and conditions shall also apply to all agreements with user, the execution of which calls for the services of third parties.
  3. The buyer's general terms and conditions shall only apply if parties have explicitly agreed in writing that said general terms and conditions shall apply to the present agreement with the exclusion of the present general terms and conditions. In that event possibly still conflicting stipulations in the user's and buyer's general terms and conditions shall only apply between parties, if and in so far that they are a part of user's general terms and conditions.
  4. If one or more stipulations in the present general terms and conditions should be null and void or declared null and void, then the other stipulations of the present general terms and conditions shall remain fully applicable. The case ensuing, user and buyer shall enter into negotiations to agree upon new stipulations replacing the null and void conditions, or, as the case may be, the conditions declared null and void, whereby the purpose and the meaning of the original conditions shall be heeded as far as possible.

Article 3    Offers and Tenders

  1. All offers shall be free of obligation unless the offer contains an acceptance term.
  2. The offers made by user shall be free of obligation; they shall be valid for a period of thirty days, unless indicated otherwise. User shall only be bound by the offers if the acceptance thereof is confirmed in writing by the buyer within thirty days.
  3. Terms of delivery given in user's offers shall only be tentative and exceeding these terms of delivery shall not entitle buyer to dissolution or damages, unless explicitly agreed upon otherwise.
  4. The prices given in above-mentioned offers and tenders shall be exclusive of VAT and other government levies, as well as of shipment costs and possible packaging and administration costs, unless explicitly stated otherwise.
  5. If the acceptance deviates (on secondary items) from the offer given, user shall not be bound by it. The agreement shall in such event not be concluded in accordance with said deviating acceptance, unless user indicates otherwise.
  6. A compound quotation shall not oblige user to execute part of the assignment against a corresponding part of the given quotation.
  7. Offers and tenders shall not apply automatically to repeat orders.

Article 4    Execution of the Agreement

  1. User shall execute the agreement to the best of his knowledge and ability.
  2. If and in so far required for the proper execution of the agreement, user shall have the right to have certain work done by third parties.
  3. The buyer shall see to it that user shall be provided in due time with all data which user has said to be necessary or which the buyer must in all reasonableness understand to be necessary to the execution of the agreement. If user has not been provided in due time with the data necessary to the execution of the agreement, user shall have the right to suspend the execution of the agreement and / or to charge the buyer for the additional costs resulting from the delay at the generally accepted rates.
  4. User shall not be liable for damage of whatever nature caused by the fact that user worked on the basis of incorrect and / or incomplete data provided by the buyer, unless user should have been aware of said incorrectness or incompleteness.
  5. If parties have agreed that the agreement will be executed in stages, user can suspend the execution of the parts belonging to a following stage until the buyer has approved in writing the results of the stage prior to it.
  6. If user or third parties engaged by user within the scope of the assignment do work at buyer's site or at a site designated by buyer, buyer shall provide the employees having to work there free of charge with all facilities desired in all reasonableness by said employees.
  7. Buyer shall safeguard user against possible claims filed by third parties who may sustain damage attributable to buyer in connection with the execution of the agreement.

Article 5    Delivery

  1. Delivery shall be made ex works/store/warehouse of user.
  2. If delivery is made on the basis of the "Incoterms", the "Incoterms" valid at the moment the agreement is concluded, shall apply.
  3. Buyer shall be held to take delivery of the goods the moment that user delivers them to him or has them delivered, or the moment at which the goods are put at buyer's disposal under the agreement.
  4. If the buyer refuses to take delivery or fails to give the information or instructions necessary to the delivery, user shall be entitled to store the goods at buyer's risk and expense.
  5. If the goods are serviced, user shall be entitled to charge possible service charges. Said service charges shall then be invoiced separately.
  6. If, in the framework of the execution of the agreement, user requires data to be given by the buyer, the term of delivery shall commence after the buyer has provided user with said data
  7. If user has given a term of delivery, it shall only be indicative. A given term of delivery shall therefore never constitute a term to be observed on penalty of forfeiture of rights. If a term is exceeded, the buyer must give user notice of default in writing.
  8. User shall be entitled to deliver the goods in parts, unless such is deviated from in writing in the agreement or if the partial delivery does not represent an independent value. User shall be entitled to invoice the thus delivered goods separately.
  9. If execution of the agreement in stages has been agreed upon, user can suspend the execution of the parts belonging to a following stage until the buyer has approved in writing the results of the stage prior to it.

Article 6    Samples and Models

  1. If a sample or model has been given to buyer, then the assumption is that such has been given by way of indication only, unless parties agree explicitly that the product to be delivered shall correspond with it.
  2. In the event of purchase of immovable property, the surface area or other measurements and indications given shall also be assumed to be merely indicative without any obligation to have the product to be delivered correspond with it.

Article 7    Inspection & Complaints

  1. Buyer shall be held to examine the delivered goods (to have the delivered goods inspected) the moment of delivery (handing over), but in any case in as short a period of time as possible. In this respect, buyer must examine whether the quality and the quantity of the delivered goods comply with what was agreed upon, or at least whether they meet the requirements applying to said goods in normal (business) transactions.
  2. Buyer shall check all delivered goods and in particular semi conductors and transformers, before using them.
  3. Possible visible shortcomings must be communicated in writing to user within three days following delivery. Non-visible shortcomings must be reported within three weeks following their detection but no later than 12 months following delivery.
  4. If in accordance with the previous paragraph, buyer files his complaint in due time, he shall still be held to take delivery and effect payment of the goods purchased. If buyer wishes to return defect goods, he shall do so following prior consent in writing from user.

Article 8    Remuneration, Price and Costs

  1. If user and buyer have agreed upon an administered price, user shall nevertheless be entitled to increase said price.
  2. User shall be allowed among others, to charge on price increases if changes in price have occurred between the moment the offer was made and the moment of execution of the agreement with respect to, e.g., exchange rates, salaries and wages, raw material, semi-finished products or packaging material.
  3. The prices given by user shall be exclusive of VAT and other government levies, as well as of the other expenses to be possibly made within the scope of the agreement, including shipment and administration costs, unless stated otherwise.

Article 9    Changes to the agreement

  1. If it is shown during the execution of the agreement that the work to be done needs to be changed and / or supplemented in order to ensure its proper execution, parties shall adapt the agreement accordingly in due time and in mutual consultations.
  2. If parties agree that the agreement needs to be changed and / or supplemented, this decision may influence the time of completion of the execution. User shall inform the buyer thereof as soon as possible.
  3. Should the change and / or supplement to the agreement have any financial and / or qualitative consequences, user shall inform buyer thereof in advance.
  4. If a fixed rate has been agreed upon then user shall indicate the degree to which the change or supplement to the agreement will result in an increase of said fixed rate.
  5. Contrary to the conditions governing this matter, user shall not be able to charge additional costs if the change or supplement is the result of circumstances attributable to user.

Article 10    Payment

  1. Payment must be made within 14 days from the date of invoice, in a way to be indicated by user and in the currency in which the goods were invoiced. Contestation of the amount of the invoices shall not suspend the fulfilment of the payment obligation
  2. User has the right to require payment in advance, cash, as require certainty for payment from the buyer
  3. If buyer fails to fulfil his payment obligation within the term of 14 days, then buyer shall be in default by operation of law. In that event, buyer shall owe an interest of 1% per month, unless the statutory interest rate is higher, in which case the statutory interest rate shall apply. The interest on the amount due and payable shall be calculated as from the day the buyer is in default until the moment he has paid the amount in full.
  4. User's claims against buyer shall become due on demand in the event that buyer is wound up, attached, declared bankrupt, or if a suspension of payment is granted.
  5. User shall be entitled to have the payments made by the buyer go first of all to reduce the costs, subsequently to reduce the interest still due and finally to reduce the principal sum and the current interest. User shall have the right, without this leading user to be in default, to refuse an offer for payment, if the buyer designates a different sequence of attribution. User shall be entitled to refuse full payment of the principal sum, if said payment does not include the interest still due, the current interest and the costs.
  6. User has the possibility to charge a credit limitation surcharge of 2%. This surcharge will not be charged if payment is made within 7 days from the date of invoice.

Article 11    Retention of Title

  1. All goods delivered by user, possibly also including designs, sketches, drawings, films, software, (electronic) files, etc., shall remain user's property until buyer has fulfilled all of his obligations under all agreements concluded with user.
  2. Buyer shall not be authorised to pledge or encumber in any way the goods falling under the retention of title.
  3. If third parties seize goods delivered subject to retention of title or wish to establish or assert a right to them, buyer shall be held to inform user thereof as soon as can reasonably expected.
  4. The buyer shall undertake to insure the goods delivered subject to retention of title and to keep them insured against damage caused by fire, explosion and water as well as against theft and make this insurance policy available for inspection on first demand.
  5. Goods delivered by user falling under the retention of title by virtue of the stipulations under 1. of the present article, may only be sold on within the framework of normal business activities and must never be used as instrument of payment.
  6. In the event that user wishes to exercise his ownership rights mentioned in the present article, buyer shall give user or third parties to be appointed by user, now for then, unconditional and irrevocable permission to access all sites and locations where user's property might be found and to take these goods back.

Article 12    Guarantee

  1. User shall guarantee that the goods to be delivered shall meet the usual requirements and standards that can be set for and made upon them.
  2. The guarantee mentioned under 1 shall equally apply if the goods to be delivered are destined for use abroad and if the buyer explicitly informed user of this use in writing the moment the agreement was entered into.
  3. The guarantee mentioned under 1 shall be valid for a period of 6 / 12 months following delivery. (see 6.)
  4. If the good to be delivered does not comply with said guarantee, user shall, at his discretion, replace or see to the repair of the good, within a reasonable period of time following receipt thereof, or, if the good cannot be returned in reason, following notification of the defect by the buyer. In the event the good is replaced, the buyer shall already now undertake to return the replaced good to user and to transfer ownership to user.
  5. The guarantee mentioned for this purpose shall not apply when the defect originated as the result of injudicious or improper use or when the buyer or third parties have introduced changes or tried to introduce changes to the good without user's consent in writing or if they have used it for purposes for which the good was not intended.
  6. If the guarantee given by user concerns a good produced by a third party, the guarantee shall be limited to the guarantee given by the producer of the good.

Article 13    Collection Charges

  1. If the buyer fails to fulfil his obligations (in due time) or defaults on them, then all reasonable costs incurred to have all extrajudicial costs and debts paid shall be borne by the buyer. If the buyer remains in default of payment within the set time period, he forfeits a immediately payable fine of 15% on the amount due at that moment. This with a minimum of € 50.
  2. If user demonstrates that he has incurred higher expenses, which were necessary in reason, said expenses shall also qualify for reimbursement.
  3. The reasonable judicial and execution costs possibly incurred shall equally be borne by buyer.
  4. Buyer shall owe interest over the made collection charges.

Article 14    Suspension and Dissolution

  1. User shall be authorised to suspend the fulfilment of the obligations under the agreement or to dissolve the agreement, in the event that:
    • buyer does not fulfil or does not fully fulfil his obligations resulting from the agreement
    • after the agreement has been concluded, user learns of circumstances giving good ground to fear that the buyer will not fulfil his obligations. If good ground exists to fear that the buyer will only partially or improperly fulfil his obligations, suspension shall only be allowed in so far the shortcoming justifies such action.
    • buyer was asked to furnish security to guarantee the fulfilment of his obligations resulting from the agreement when the contract was concluded and that this security is not provided or insufficient. As soon as security is furnished, the authorisation to suspend shall lapse, unless said fulfilment has been unreasonably delayed because of it.
  2. User shall furthermore be authorised to dissolve the agreement (have the agreement dissolved) if circumstances arise of such a nature that fulfilment of the obligations becomes impossible or can no longer be demanded in accordance with the requirements of reasonableness and fairness, or if other circumstances arise of such a nature that the unaltered maintenance of the agreement can no longer be demanded in all reasonableness.
  3. If the agreement is dissolved, the user's claims against the buyer shall be forthwith due and payable. If user suspends fulfilment of his obligations, he shall retain his rights under the law and the agreement.
  4. User shall always retain the right to claim damages.

Article 15    Return of Goods Put at Buyer's Disposal

  1. If user has put goods at buyer's disposal during and in connection with the execution of the agreement, buyer shall be held to return the delivered goods within 14 days in their original state, free of defects and in their entirety. If buyer fails to fulfil this obligation, all resulting costs shall be at buyer's expense.
  2. If, for any reason whatsoever, buyer still remains in default to fulfil the obligation mentioned under 1. after being warned to do so, user shall be entitled to recover the resulting damage and costs, including replacement costs, from buyer.

Article 16    Liability

  1. If the goods delivered by user are defective, user's liability vis à vis the buyer shall be limited to the arrangements made in the present terms and conditions under "Guarantee".
  2. If user is liable for direct damage, then said liability shall be limited to a maximum of the amount of the statement of expenses, at any rate that part of the agreement to which the liability relates. User's liability shall at all times be limited to a maximum equalling the amount of the payment to be made by user's insurer in the occurring event.
  3. Direct damage shall be understood to be exclusively:
    • the reasonable costs incurred to establish the cause and the volume of the damage, in so far said establishment relates to damage in the sense of the present terms and conditions
    • the reasonable costs possibly incurred to have user's faulty performance meet the conditions of the agreement, unless such faulty performance cannot be attributed to user;
    • the reasonable costs incurred to prevent or limit the damage, in so far buyer demonstrates that said costs have led to the limitation of direct damage as meant in the present general terms and conditions.
  4. User shall never be liable for indirect damage, including consequential damage, loss of profit, lost savings and damage due to business stagnation.
  5. The limitations of liability for direct damage contained in the present terms and conditions shall not apply if the damage is due to intentional act or omission or gross negligence on the part of user or his subordinates.

Article 17    Transfer of Risk

  1. The risk of loss of, or damage to the products being the subject of the agreement, shall be transferred to buyer the moment said products are judicially and/or actually delivered to buyer and therefore fall into the power of buyer or of third parties to be appointed by buyer.

Article 18    Force Majeure

  1. Parties shall not be held to fulfil any of their obligations if they are hindered to do so due to a circumstance through no fault of their own and which cannot be attributed to them by virtue of law, a legal action or generally accepted practice.
  2. In addition to the provisions of the law and the judge-made law in this respect, force majeure shall in the present general terms and conditions furthermore be understood to be any external circumstance, be it envisaged or not, on which user cannot have any influence but which prevents user from fulfilling his obligations. Industrial action at user's company shall also be understood to be a circumstance of force majeure.
  3. User shall also be entitled to invoke force majeure if the circumstance rendering (further) fulfilment of the obligation(s) impossible, commences after the point in time on which user should have fulfilled his obligation.
  4. Throughout the duration of the circumstances of force majeure, parties shall be entitled to suspend the fulfilment of their obligations. If this period lasts for more than two months, either of the parties shall be entitled to dissolve the agreement without any obligation to pay the opposite party damages.
  5. Insofar user has already partially fulfilled his obligations resulting from the agreement at the moment the circumstance of force majeure commenced or shall be able to fulfil them and insofar separate value can be attributed to the part already fulfilled or still to be fulfilled respectively, user shall be entitled to invoice the part already fulfilled or still to be fulfilled respectively. The buyer shall be held to pay this invoice as if it were a separate agreement.

Article 19    Safeguarding

  1. The buyer shall safeguard user against claims filed by third parties concerning intellectual property rights on material or data provided by the buyer, which shall be used for and during the execution of the agreement.
  2. If the buyer provides user with information carriers, electronic files or software etc., the former shall guarantee that said information carriers, electronic files or software are free of viruses and defects.

Article 20    Intellectual Property and Copyrights

  1. Without prejudice to the other stipulations of the present general terms and conditions, user shall reserve the rights and authorities to which user is entitled under the Copyright Act.
  2. The buyer shall not be allowed to introduce changes to the goods and material provided, unless the nature of the delivered goods and material dictates otherwise or if agreed upon otherwise in writing.
  3. The designs, sketches, drawings, films, software and other material or (electronic) files, possibly produced by the user within the framework of the agreement, shall remain user's property, irrespective of the fact whether they have been handed over to the buyer or to third parties, unless agreed upon otherwise in writing.
  4. All documents, such as designs, sketches, drawings, films, software, (electronic) files, etc., provided by user, shall be destined to be used by buyer exclusively and must not be reproduced, made public or brought to the notice of third parties by buyer without prior consent from user, unless the nature of the documents provided dictates otherwise.
  5. User shall reserve the right to use the knowledge gained due to the execution of the work for other purposes, in so far no confidential information shall be brought to the notice of third parties when doing so.

Article 21    Secrecy

  1. Both parties shall be bound to secrecy of all confidential information they have received within the scope of their agreement from each other or from another source. Information shall be considered to be confidential if the other party has indicated so or if the confidential character results from the nature of the information.
  2. If a statutory provision or a judicial decision compels user to convey confidential information to third parties designated by law or by the court and user cannot for that purpose invoke a legal right to refuse to give evidence or such a right acknowledged or allowed by the competent court, user shall not be held to pay damages or compensation and the opposite party shall not be entitled to demand the dissolution of the agreement on the ground of any damage resulting from said circumstance.

Article 22    Non-employment of the opposite party's personnel

  1. Throughout the duration of the agreement and for one year following termination thereof, buyer shall not in any way, hire or employ in any other way, be it directly or indirectly, staff of user or of enterprises whom user has engaged to execute the present agreement and who are (were) involved in the execution of the agreement, without prior proper businesslike consultation on this matter, all this in accordance with the requirements of reasonableness and fairness.

Article 23    Disputes

  1. The Court in user's place of business shall have exclusive jurisdiction to hear actions, unless the District Court is the competent Court. User shall nevertheless be entitled to submit the dispute to the Court deemed competent by the law.
  2. Parties shall only refer the matter to the court if they have done their utmost to solve the dispute in mutual consultations.

Article 24    Applicable Law

  1. Dutch law shall apply to each and every agreement between user and the buyer. The Vienna Sales Convention shall be explicitly excluded.

Article 25    Changes to the Terms and Conditions, interpretation and their location

  1. The present terms and conditions have been filed at the office of the Chamber of Commerce in Maastricht, under number 14621286.
  2. The Dutch version of these general terms and conditions prevails at all time in case of disputes with regard to the interpretation and purpose of these terms and conditions.
  3. The most recently filed version shall always apply, or, as the case may be, the version valid at the time the agreement was concluded.
    Berg en Terblijt , November 2015
    HAJÉ Electronics
    J.J.M. Biermans
1 x Ceramic. multilayer 39nF 50V X7R 10% e=5,0mm1 x Smd electrolytic capacitor Radial Can 10uF 16V (Ø4mm x 5.4mm)3 x Desoldering wick 2.8mm x 7.5 mtr (10-25L)1 x SI-N 30V 30mA 250mW TO-921 x MKS 2 Film Capacitors 10u 50V 20% 7x7mm R52 x Ceramic capacitor 1,2pF e=2,54mm3 x Panel Fuse Holder 5x20mm - Stelvio1 x Triac 600V 12A TO-2201 x Varistor SIOV - S20 K300 300V 1,00W ø21,5x5,6mm1 x Micro-Fit 3.0 Male crimp terminal AWG20-242 x Pinheader 36 pins Male single row, pitch:2.54mm, H:11.2mm2 x Microphone Windshield for Boommike HS-PRO221 x VHF antenna 156/162 MHz.1 x 9W Wirewound resistor 22K 10% 9x9x38mm Vitrohm - RoHS2 x Ceramic capacitor 2,2nF 20% 1kV e=5mm2 x Precision Centigrade Temperature Sensors SOT-231 x Fuse 5x20mm Ultra fast - 10A / 250V1 x König wired optical mouse P/S21 x SI-P 60V 600mA 800mW TO-183 x UHF Whip Antenna (450-490 MHz) oa TK-2000, TK-30002 x Styroflex Capacitor. 330PF - H - 4X10.5mm - RAD2 x Mini Gender 9Pol.Female / Female2 x Pilotlamp ø6 x 36mm - 12V/250ma 3W1 x FME Male to TNC Male ( Amphenol connex 192105 )1 x UHF Double Female1 x Panel Fuse Holder 5x20mm screw - Stelvio - CE / VDE / RoHS1 x Sealing boot / Nickel plated for miniatur toggle switch1 x Mica Insulation plate TOP-3 17.5x20.5mm2 x Potentiometer mono-lin ø4mm metal shaft - 5K2 x UHF Digital Handheld with GPS 400-470 MHz, with key pad1 x Wire wound resistor 5W AC05 5% - 0.33 E ø7, 5x17mm1 x Car radio antenna plug (11 mm) Screw version2 x 10 pcs Carbon Film resistor 1/4W 5% - 10K1 x Schottky Discrete Diode 40V 3.3A DO-201AD1 x Fan 120X120X38MM 230Vac plain bearing 43dBA Sunon1 x Ceramic. multilayer 100pF 50V NP0 5% e=5,0mm1 x Amidon Powder iron toroides 10µ - 3-30 Mhz1 x Low Drop Reg. 11V 0.5A TO-2202 x NTC ø5,5mm max. 10% - 4K71 x D-Sub connector receptable solderversion - 15-pole1 x Full Duplex LTE Base Station for the IP501H2 x Antenna mast Ø48mm Steel 2mtr wall thickness 2mm1 x Wirewound resistor 5W 1K 5% ø6.5x17.5mm1 x SMP Servo Driver1 x MKP condensator 680nF/305VAC R 22mm ( B32923C3684M000 )1 x 10 pcs Carbon Film resistor 1/4W 5% - 18K1 x Printed circuit board double-sided 10x16 cm3 x Reed contact 0.25A/3W 1xchange ø2.54x14.0mm1 x Cable shoe flat plug pin 4,8x0,8mm Blue1 x Twist drill HSS - DIN 338 - ø0.8mm (p / pc)1 x Japanese potmeter 100K mono-logarithmic with serrated shaft1 x Waterproof Speaker microphone IP671 x Compact automatic battery charger between 2.2 and 10 Ah1 x SI-N 30V 1A 1W TO-922 x Nexedge full keypad and Display VHF Handheld1 x RCA male connector - 2 x RCA female connector2 x Foil Trimmer 2 - 15pF 2pins Grid 5.5 mm yellow1 x SMA Male Chassis Mount1 x SI Varicap 28V 2.0-2.3pF1 x Choke coil resistance model 10mH 5%2 x Amidon Powder iron toroides 10µ - 1-30 Mhz1 x Automatic fuse - 8A - 250VAC1 x Potentiometer mono-log ø6mm metal shaft - 5K1 x UHF 370-490 Mhz mobile antenna Black DV Foot (P / N 2205506.33)1 x Polyurethane glass sleeve 3mm inw white p/mtr1 x Coil resistormodel 0,22uH 10%12 x Microphone with remote controlled PTT button 6-pin for President7 x SWR cable 90cm with on both sides a PL plug1 x 2 way car splitter 12V with cable1 x Styroflex Capacitor. 25PF - 3X7.5mm - AX3 x Male 3.5mm mono plug - Tulip plug kontra2 x 5V, 150mA (max) three terminal positive voltage regulator TO-92L3 x NPN 45V 100mA 300mW TO-922 x Housing plastic adapter for 2x D-SUB 25p2 x 230V plug RA black with earth pin2 x 8 Darlington Array DIL-181 x Elco radial 1000uF/10V 10x16mm e=5mm 105°2 x Elco radial 100uF/16V 5x11mm e=2,5mm 105°1 x Elco radial 10uF 16V ø4x5mm e=1.5mm 85° (MCUMR16V106M4X5)6 x SI N-Chnl.FET 25V 10mA TO-921 x Labory socket panelmount ø2,6mm - white2 x Metal film resistor 0.6W-350V-1%-ø2.5x6.5mm - 205E1 x Industry Relay plug / solder 4PCO 7A - 24Vdc +LED+Diode1 x NPN 20V 100mA 300mW SOT-253 x Mono Amplifier Module 9V-12V-18V-20V/DC 18W 4Ohm for Scanners1 x Lamp Ba7S socket ø7 x 20mm - 6V/100mA1 x Mini-Fit Jr Terminal female 18-24 AWG wire insulation 1.3-3.1mm1 x CANON BCI-3eBK black1 x USB pcb right angle type A male1 x 4 bit Bin. Counter Synch Reset DIL-161 x Ceramic capacitor 33pF 100V NP0 e=5,08mm1 x Elco radial 1000uF/35V 13x20mm e=5mm1 x Mounting Wire Solid ø1,0mm² 900V - red p/m1 x 220V AC Cable 3 x 1mm² White Round p/mtr1 x Bourns Cermet trimmer 25 turn top-adjust 10K SIL (3296W-1-103)1 x Fuse ø5x20mm fast - 2,5A / 250V1 x Crystal 11.718Mhz narrow dim. W7 x D2.2 xH8.5mm1 x Metal film resistor 0.4W-1%-330E1 x Compact speaker mike for Kenwood, Midland CT790 / CT8903 x Amidon 2 holes, Material 73 - Permeabilität 25001 x Fuse ceramic 6.3x32mm fast 10A/250V2 x ø3mm Low Current (2mA) red diffused 627nm 2.8 mcd1 x Carbon film resistor 1W 5% - 220E1 x Dial 15 turns axis dia:6.35mm outside dia:46mm1 x Nexedge full keypad and Display UHF Handheld1 x 10 pcs Capacitor 1206 - 10nF1 x Off Line Switcher 35-50W DIL-8(7pins)1 x Bipolar power transistor, NPN, 5A1 x UHF NEXEDGE Digital/Analogue Mobile with GPS1 x Radio reception with indoor antenna coax female plug1 x ap v-reg 1.25-125v 0.7a TO-2201 x Enclosure 105 x 105 x 55mm - IP-66 - plastic screws2 x Fuse ø5x20mm slow-blow - 1,25A / 250V1 x Housing ABS Keyboard gray 189x134x32/55mm2 x Micro-Fit 3.0 Male housing connector 4-polig2 x Triac 600V, 1A, 10 mA, 1.3V, 1W SOT-2231 x Mobile Magnetic base CB antenna, incl. 4m cable and PL plug1 x MKT Capacitor 680nF/63V 5mm1 x 10 pcs Carbon Film resistor 1/4W 5% - 0.47E1 x Wirewound resistor AX5W 5% - 100E1 x Bourns Cermet trimmer 25-turn top-adjust 1K QIL (3296Y-1-102)1 x SMD LED 1206 3,2x1,5x1,1mm 28,5-72mcd 140° - green3 x Solder tin 0.7mm 60% tin, 40% lead alloy1 x Coil, 291-T1066-91019, size: 7x7mm1 x Ceramic. multilayer 150pF 50V NP0 5% e=2,5mm3 x Foil Trimmer 2.5 - 7.5 mm red 27pF 3pins Grid2 x Fan 60x60x25mm 12Vdc 25,0dBA 39,9m³/uur - ball-bearing Sunon1 x Precision Potentiometers LIN 20K 15% 1W1 x Bluetooth headset for Icom ID5100e, IC-A16E-BT, IC-A25NE1 x SI Varicap 30V 2.8-3.2pF, DO-341 x Adapter cable to connect HS94, HS95, HS97 F3002, F40021 x N-fet-dg 20v 30ma .2ghz 2 SOT-1032 x Noise-reducing headphones, noise reduction mike TK-3601D1 x Varistor SIOV - S14 K275 275V 0,60W ø15,5x5,0mm1 x v-comp 1x 36v 200ns oc DIL-82 x Light headphones with 1 speaker and inline PTT1 x Cable shoe plug fem uninsulated 1.0-2.5mm² for MWP..2 x pos v-reg 15v 1.5a 4% TO-2201 x Indicator light ø23,3mm 230Vac - green1 x Plug-in lamp small ø5 x 20mm - 6-7V/80mA3 x quad 2-inp nand schm.trig DIL-142 x Kenwood TK3501 e PMR446 incl.KNB-45 Battery & Charger KSC-352 x DIN socket - 4-pole print right-angled - Lumberg2 x Splashproof Speaker 3.2 Ohm, Max power 20Watt1 x Opamp. 22V Temperature Range:0°C to +70°C, DIL-82 x Schottky barrier diodes 30V, 200mA, 200mW DO-351 x GE Diode 60V 25mA1 x UHF Female to BNC Male4 x FME Right Angle Male To Mini UHF Male1 x Varistor SIOV - S14 K320 320V 0,60W ø15,5x5,4mm1 x Dual Retrigbl.Monost.Multivbrt DIL-162 x Cable shoe male plug uninsulated 1.0-2.5mm² for MWS ..1 x FME Male to BNC Female1 x SI-N 80V 4A 40W TO-1262 x Set of multifunction connector and 6.2mm / 1 x 2 Pins1 x Ceramic capacitor 27pF 5% 1kV e=5mm1 x Trimmer mini small horizontal 1-turn ø6,3mm Carbon 5K1 x Trimmer 25 turns side-adjust SIL - 100K1 x GE-P 15V 10mA 60mW TO-721 x Quad analog switch DIL-147 x 10 pcs Resistor 1206 - 470E1 x Incremental Rotary Encoder, 12mm,Vertical, 24Detents,24 Pulses1 x Wirewound potentiometer 4W 10K - AB - RoHS1 x Desoldering wick 1.27mm x 1.50 mtr (5-5L)6 x Bluetooth remote control with microphone dongle 6-pin President2 x Dual Opamp. SIL-82 x NPN 50V 0,1A 0,3W 300MHz TO-181 x USB 2.0 Webcam Full HD resolution and stereo microphone1 x Stop mosquitoes, fly with this insect lamp1 x Quad 2 Input NAND Gate OC4 x Buttons (3x) serving QRM kit1 x Fuse ø6,3x32mm slow-blow - 1A2 x Elco radial 10uF/35V 5x7mm e=2mm 105°( 35ZLG10MEFC5X7 )3 x Metalfilm resistor 0.4W-1%-1M-RoHS1 x Styroflex Capacitor. 15NF - 63V - RAD3 x Varistor SIOV - S10 K130 130V 0,40W ø12,0x4,2mm1 x Band-switching diodes 35V 100mA DO-341 x Ledholder 5mm with ring black1 x 10 pcs Carbon Film resistor 1/4W 5% - 22E1 x Inverter 24V => 220V 150Watt44 x CB Radio, 40 Multi chan. FM/AM Extra compact size and 12/24V1 x UHF Double Female Bulkhead1 x Transistor socket 4 contacts2 x Elco radial 100uF/400V 18 x 36mm, 105°C4 x Earphone plug adapter.1 x Elco radial 4,7uF/350V e=2mm 105°3 x SI-N 60V 15A 115W TO-32 x Labory plug ø2,6mm with side-entry - blue2 x Ceramic capacitor 270pF 100V e=2,54mm1 x Elco radial 220uF/16V 6,3x11mm e=2,5mm 105°1 x Behind-the-head headset with flexible boom mike required VS11 x Dual-in-Line PCB relay DPCO 1,25A - 24Vdc 200mW5 x Chassis section single-gage panel mounting ex 5.5 / inw 2.5mm4 x Built-in Push Switch Make Black Double Pole 19X121 x 10 pcsResistor 1206 - 0,22E2 x Ceramic capacitor 5,6nF 20% 1kV e=5mm5 x Piher 6mm stereo potentiometer-lin as metal - 25K1 x Fuse ceramic 5x20mm Slow 6.3A/250V1 x Carbon film resistor 3W ø6,5x17,5mm 5% - 3K31 x Li-Ion Battery (1480 mAh)1 x RCA plug - RCA plug1 x UHF Protective Cap Female with chaine1 x Transistor socket 4 contacts1 x 1 pcs Capacitor 1210 - 1uF7 x SWR cable 45cm with on both sides a PL plug1 x Crystal 0.32768Mhz- TB38 (3x8mm)1 x E10 Globe lamp ø15 x 28mm - 12V/350mA1 x BXL football wireless mouse USB 800 DPI1 x 9W Wirewound resistor 100E 10% 9x9x38mm Vitrohm - RoHS1 x Crimping slip-blue bus isolated 4.8 mm.3 x WAGO Welding clamp mini 5-way mini 5x0.5-2.5 (0.50 - 2.50 mm²)4 x 10 pcs Carbon Film resistor 1/4W 5% - 270K3 x Trimmer top adjust Ø 10mm 500E3 x Wirewound resistor 25W 1% 6.8E3 x Fuse ø5x20mm slow-blow - 63mA / 250V2 x Microphone spiral extension to 6p mike male and female plug3 x Nexedge full keypad and Display Digital UHF FM Portable2 x 9W Wirewound resistor 10E 10% 9x9x38mm Vitrohm - RoHS2 x Fuse ceramic 6.3x32mm fast 12A/250V2 x Jumper open 2,54mm - black3 x Arrow for KNP 15B - lightgray1 x Fan 92x92x25mm 230Vac 37dBA ball Sunon2 x Fuseholder for ø5mm fuses1 x Built-in mounted socket outlet with cover 220V 16A RA Black IP441 x Coupler ISO 5.3KV CTR 100-200%1 x Ceramic capacitor 4,7pF e=2,54mm1 x SI-P 80V 1.5A 8W1 x Telux 7.62 mm - 565nm - 900mcd - 45 ° - green1 x Heat Shrink ø 3.2 - 1.6mm black p / mtr1 x Ferrule blank ø0.75 x 6mm1 x Ceramic capacitor 330pF e=2,54mm4 x Throat Microphone for PMR handy ICOM,YAESU,STANDARD,ALINCO1 x SMA Male Chassis Mount gold1 x Metal film resistance 0.4W-1%-220K1 x Banana chassis part ø4mm 10A - black2 x SMD trimmer capacitor 5.5pF-20pF 100V 4x4.5x2.7mm Red1 x Elco radial 22uF 6.3V ø4x5mm e=1.5mm 85° (MCUMR6V3226M4X5)1 x Battery Adapter for Icom BC-119N and BC-121N1 x Micro-Fit 3.0 Male housing connector 6-polig1 x Car relay 24VDC SPCO1 x PCB relays DCPO 8A - e= 5mm - 6Vdc1 x Pushbutton switch miniature (NO)- ø7mm- solder - red1 x External speaker 20W rated input for ICF5400,ICF6400 NO3 x Semiconductor1 x 7-stage binary counter DIL-141 x UTP CAT7 Gray 5mtr suitable for 10/100/1000/10000Mb1 x N-Chnl. J FET 18V 10mA TO-921 x SI N-Chnl. J-FET 30V 50mA TO-183 x Transistor socket 3 contacts1 x Labory plug ø4mm with side-entry solder - red1 x IC socket gold plated machined dil 24p e=7,62mm2 x Elco radial 0,1uF/100V 5x11mm e=2,5mm 105°1 x Antenna CB Roof top Mount Whip Stainless Steel 175cm 1000/3000W1 x Fuse ø5x20mm fast - 10A / 250V1 x Wi-Fi Smoke detector battery powered 85db white EN146041 x UHF Male to TNC Female1 x NPN 45V 0,1A 0,5W TO-921 x Scanner radio antenna extension, 25-1300 MHz (BNC)1 x Coil, LPCS4201, 7E 455kHz, AM IF, White, Q=60, L/C=150pF, 7x71 x AC/DC Converter Buck-Boost Flyback 85V to 265VAC 120mA SO-8C1 x SI-N 60V 150mA 400mW TO-921 x Labory socket panelmount ø4mm 35A - red1 x Cable strain relief ø5-6,8mm, drill hole ø10mm - black1 x Elco radial 10uF/25V 5x11mm e=2mm 105°1 x DC Powerplug ø5,5/ø2,5mm long2 x D-Sub connector plug solderversion - 37-pole2 x Transitor TO-991 x Voltage output -12 V Current output max. 1 A1 x Potentiometer mono-log ø4mm metal shaft - 2K51 x Mounting Wire Solid ø1,0mm² 900V - blue p/m1 x SI-P 80V 500mA 625mW TO-921 x Mini-Fit Jr Male Housing Connector 24-pole1 x UTP CAT6 (RJ-45) gray 2m supports 10,100,1000 Mbps1 x Li-ion Battery 7.4V 1130mA i.a. TK-2000, TK-30001 x 10 pcs Resistor 1206 - 2,2E1 x Metalfilm resistor 0,6W-1%-18M3 x Rever microphone with Inear earplug.1 x N-Channel Switch TO-921 x Amidon Powder iron toroides 10µ - 2-30 Mhz1 x Triac 600V 6A TO-2202 x Extension cable 220V 3x1.5mm² 5mtr White with protective earth1 x Elco radial 47uF/250V e=2,5mm 105°1 x Weller tip conical flat 0.7mm/1.6mm (LR-21)2 x SI-N 75V 800mA 800mW TO-51 x Styroflex Capacitor. 510PF - 63V - 2.5% - 3X8mm - AX1 x Waterproof Li-Ion battery pack Li-Ion 7.4V/2250mAh1 x Fuse ceramic 6.3x32mm fast 2A/250V2 x Flexible leather bag with flap, belt clip and strap connection1 x 2-way Input: 1x RCA Fem or 1x TosLink to output 2x Tulip Fem5 x Print board Slow Blow fuse radial 10A 250Vac3 x SMD LED 0805 2,0x1,25x1,1mm 18-45mcd 140° - green4 x opto-triac dr. 7500v ift=30 DIL-83 x Trimmer side adjust 15mm 50K3 x Elco radial 47uF/100V e=2,5mm 105°3 x Lamp Ba9S socket ø10 x 28mm - 12V/180mA1 x Set D Sub Jack Screw 48.77mm UNC4-40 (2x)3 x GE Diode 50V 50mA = aa119 DO-355 x Elco radial 10uF/50V 5x11mm e=2mm 105°4 x Adator for 6mm to 4mm shaft1 x SI N-Chnl.FET 30V 10mA TO-722 x Quad 2 Input NAND Gate DIL-141 x Lead battery 6V, 7.0Ah, dim:(LxWxH) 151x34x95mm1 x Door-Window alarm on batteries 85dB White2 x TR5 Fuse Slow 3,15A2 x Alligator type belt clip for ID31E & ID51E & IP100H6 x LTE Handheld Transceiver, Wide Coverage Over LTE, 4G, 3D Network2 x DAB + Antenna 1mtr long and 4cm thick (F-connector)3 x Shrink tubing with adhesive black ø 3 - 1mm length 0.5 m4 x Mini-DIN chassis part female 4-pole panel mounting3 x Varistor SIOV - S20 K625 625V 1,00W ø21,5x7,9mm3 x N-Chnl.MOSFET 100V 5.6A 43W TO-2203 x SI-N 120V 8A 25W TO-2201 x Choke coil radial 56mH barrel green1 x Metalfilm resistor 0,4W-1%-392K1 x Temperatue Fuse 105°C/10A1 x Elco radiaal 1000uF/50V 12,5x25mm e=5mm 105°1 x Zenerdiode 250mW 5V1 SOT-231 x Alligator clip for Icom F15, F25, A151 x Button Black Ø 15.5mm with white point Axes hole Ø 6mm1 x Right Angle FME Male to BNC Male1 x LF Power Amp. 14V 5.5W DIL-161 x Deluxe computer keyboard black USB1 x Labory plug ø2,6mm with side-entry - white1 x E10 Lamp with lens ø9,5 x 24mm - 3,7V/300mA1 x Heat Shrink various sizes ø1 - ø2 - ø3 - ø4.5 - ø6 - ø9mm1 x 100V Vcbo, 5A Ic Low frequency power silicon NPN transistor1 x si-n 1000v 15a 175w 0.8us1 x Hex Schmitt Trigger Dil-141 x Voltage Controlled Amp. SIL-81 x Print transformer EI38/Ta70/B 4.5VA/230V 2x7.5V/2x300mA1 x Quad Low Pwr. Opamp. DIL-141 x Sub-Miniatur Toggleswitch, 1-pole on-off-on1 x TNC Male Crimp type RG58U Telegärtner J01010A22551 x Lamp with wires ø4.3 x 20mm - 12V/100mA - axial1 x Automotive bladefuse mini 10A - Red1 x Fuse ø6,3x32mm slow-blow - 12A2 x Jumper closed 2.54mm red1 x SI-N 50V 200mA 300mW TO-92klein1 x SI-P 180V 15A 85W TO-2201 x Styroflex Capacitor. 68PF - 500V - 2.5% - 3.5X10mm - AX1 x 10 pcs Carbon Film resistor 1/4W 5% - 1K1 x K60 contact cleaner with lubricating and anti-corrosion effect1 x SmartLife Water Control and Irrigation System, Bluetooth, IP54 1 x Simple Melody Generator (For Elise) TO-921 x Mounting Clamps ø65mm (without screws)2 x PNP 45V 100mA 300mW TO-921 x Potentiometer mono with 6mm shaft linear-10K - RoHS1 x TNC Male T type to Double BNC Female1 x 60V Audio Power Driver DIL-161 x Potentiometer mono with 6mm plastic axle-linear 5M PIHER1 x Labory plug ø4mm with side-entry solder - yellow1 x Diode schotty 1A 40V DO-411 x 1 - 15 MHz / 5uH1 x Metalfilm resistor 0,4W-1%-36E1 x Styroflex Capacitor. 22NF -63V -CA5% -10X15mm -AX1 x PNP 45V 800mA 625mW TO-921 x Trim screwdriver cross PO 2x15 Ceramic Blade1 x Metalfilm resistor 0,4W-1%-2M71 x 8bit Parallel-In/Serial-Out Shift Register SO-161 x Multipoint RS485/RS422 Transceivers SO-81 x SI-N 1500V 6A 120W TOP-31 x Print Share modular RJ-45 top-entry Molex 95003-28811 x SM DAC, 12-BIT 3V SO-201 x Ceramic. multilayer 3,3nF 50V X7R 10% e=2,5mm1 x Silicon N channel IGBT Transistor IGBT 40A 2V 312W 1.35kV TO-2471 x MKT Capacitor 39nF/63V 5mm1 x Print transformer EI60 20VA/230V - 1x 24V/834mA BV EI 601 10671 x Resistor 5W 0,33E 10% Low-Inductance e=10mm1 x Compact, license-free radio. 8 can. 0.5W1 x Zenerdiode 500mW 4V3 DO-351 x Chassis 3.5 mm stereo switch to open - Marushin - RoHS1 x BNC Rapid Male connector RG58U1 x SI-N 50V 150mA 200mW2 x L-Wall support 45cm for dish til 100cm mounting Aluminium2 x External speaker for mobile incl. 2 meter cable1 x Metalfilm resistor 0,4W-1%-178E25 x SI-N 140V 10A 117W TO-31 x Elco radial 220uF/35V 10x17mm e=5mm 105°1 x Electronic transformer for halogen lamps 11.5V 20-70W1 x Battery Holder 3x penlight (AA) with 15cm cable2 x Incotech DZZ14-J2 Earphone D shell, with 2.5mm Right Angle 40cm1 x Labory plug ø4mm with side-entry solder - black1 x MKT Capacitor 470nF/63V 5mm1 x Print transformer EI30 3VA/230V - 12V/250mA BV EI 305 20521 x 10 pcs Carbon Film resistor 1/4W 5% - 2K71 x Antenna Amplifier for RX (Reception)3 x Snap-In Elco 85° 6800uF/50V 30x40mm1 x USB-C cable for syncing and charging your I-phone1 x Ceramic capacitor 1,5pF 100V NP0 e=5,08mm1 x Dual SI Varicap 30V 34-42pF cb-122 x Trimmer mini small horizontal 1-turn ø6,3mm Carbon 10K3 x 10 pcs Resistor 1206 - 330E1 x Automatic fuse - 16A - 250VAC1 x Wirewound Resistor 10W 5% ø8x44mm - 1R1 x IC socket gold plated machined dil 14p e=7,62mm1 x Reflective Optical Sensor. 32v 1.5%1 x Motor run 6.0 uF 450 V M8 Faston Ø30 x 58 mm ±10%41 x MKP Capacitors 330nF 275V, R 22,5mm1 x Heatsink 42x25.4x25mm with TO-220 drill Black2 x HSS Twist drill with ø2.35mm shank - ø0.8mm (p / pc)1 x Polyamide spacer M3 int/ext, length 15mm1 x Potentiometer ø6mm schaft plastic mono-log 100K1 x Grill for 80 x 80 mm fans - plastic1 x Labory socket ø2,6mm with side-entry - yellow3 x Coax Plug Adapter connecting plug (11 mm) car radio2 x Fuse ø10,3x38mm fast-acting - 25A / 600V ceramic1 x BNC T type Male to Double BNC Female1 x Ø4mm light with 300mm long wires 8V/80mA1 x Pilotlamp ø11x39mm - 24V 200ma 5W1 x arco429 - 80 - 400pF - 20x10mm2 x Coil, KACSK38930, 10K 10.7, FM IF, Red, Q=80, L/C=82pF, 10x101 x Choke resistance model 22mH 5%1 x Elco Radial 47uF/16V bipolair ø6.3x11mm1 x DC Powerplug ø1,7xø4,75mm JSAP-3 (DC 6,3-10,5V)3 x TV Sound IF Amp./Demod.1 x DIL Miniature Relay SPCO 15Vdc 120E - RoHS1 x AC/DC adapter for Intek RP-600 220v ->6VDC 300mA2 x Diode 600v 1.5a/35ap 250ns DO-152 x Fuse ø5x20mm fast - 63mA1 x Leads ø4mm silicon 1mm²/16A IEC - 1mtr - red1 x Nylon carrying bag for, among others, Kenwood NX-220e1 x MKT Capacitor 270nF/63V 5mm2 x Elco Axial 68uF/16V ø6x10mm5 x Ceramic. multilayer 100nF 50V X7R 10% e=2,5mm4 x Earphone kit1 x NPN 32V 200mA 390mW TO-181 x NPN Epitaxial planar transistor TO-220 Iso1 x si-n 30v 0.05a 0.25w uni TO-921 x N-Chnl. MOS FET 160V 7A TOP-31 x Potentiometer mono-lin ø6mm metal shaft - 50K1 x BNC Male Clamp type RG591 x SI Varicap 30V 4.3-6pF1 x OFF LINE SWITCHER, 7 pins, SO-81 x NPN power transistor 45V 1W TO-923 x Battery clip for 9V battery I version222 x Solder tin 1mm 60% tin, 40% lead alloy259 x Soldertip TCP screwdriver short 0,8/2,4mm 370°C94 x IGBT 600V 9A 25W TO-220FP294 x Speaker 5W 8 Ohm, with holder and cable with 3,5mm jack plug.170 x KONTAKT 60 an oxide-dissolving contact cleaner237 x pwr amp 1x65w hifi TO-220-5254 x Triac 600v 16a 50/100ma TO-2201 x FME Female to Mini UHF Male301 x Sponge for KH-20 Solder Standard 522 420 99267 x President Johnson CB transceiver 40 Multi Channels FM/AM 12/24V3 x USB Programming cable - Twin-jack Connector1 x 10 pcs Resistor 0805 - 560K1 x Elco axial 22uF/40V ø4,5x10mm2 x Labory plug ø2,6mm with side-entry - black1 x Transistor socket 8 contacts1 x Semiconductor DIL-241 x Fuse ceramic 5x20mm Slow 1.6A/250V2 x Metalfilm resistor 0,4W-1%-6M81 x Mounting bracket for roof rack tube (car roof rack attachment)1 x Euro plug 230V 2.5A Contra Black1 x SI-N 100V 25A 125W TOP-31 x Styroflex Capacitor. 5NF -J - 9.5X10mm -AX1 x 3½ AD Convrt. LCD Drvr. DIL-401 x Varistor SIOV - S20 K20 20V 0,20W ø21,5x5,1mm1 x 3.5 mm stereo jack socket Panel mounting round - Lumberg1 x Pos. Reg. 12V 0.5A TO-2201 x PNP 25V 100mA 300mW TO-921 x Cigarette lighter cable for BC-119 or BC-1931 x Spacer plastic M3 - 5mm - black1 x resonator SMD - 6.00MHZ 0.5%1 x Brass spacer M3 int/int, length 12mm1 x Elco radial 1500uF/50V 16x35,5mm e=7,5mm 105° ( EEUFC1H152L )1 x Battery Holder 4x penlight (AA) snaps (1x4)1 x Trimmer side adjust 10mm 10K - Piher - RoHS1 x Multifuse 30V 2300mA - Bourns2 x AC/DC Converters 15W 85-265VAC 19W (230 VAC) SO-8 (7pins)1 x RG 213 Coaxial cable 50 Ohm MIL p/mtr1 x SI-P 150V 50mA 800mW 200Mhz TO-921 x Fuse Holder 5x20mm Vertical mont print. bayonet e = 10mm - Set2 x PL Antenna mount1 x Fuse ø6,3x32mm fast-acting - 2,5A1 x Styroflex Capacitor. 200PF - 500V - 10% - RUWEL - 4X10mm - AX1 x Neon indicatorlight 12x16mm 230V - red45 x Alan M20 CB transceiver 40 Multi Channels FM / AM1 x NPN 80V 1A 800mW TO-922 x Thyristor 500V 0.8A TO-921 x CR2430, Ø24.5x3.0mm 3.0V 270mAh Solder Horizontal PCB1 x USB cable connector solder type A1 x Headset Required VS-1 serie for All Handheld1 x 3 1/2 Digit digital multimeter with 24 measuring ranges.1 x MKT Capacitor 100nF/63V 5mm2 x Fuse ø5x20mm slow-blow - 5A / 250V1 x 3W Koolfilm weerstand ø6,5x17,5mm 5% - 10E1 x Solder lug M6 single vertind2 x White power cord with the well-known 8-shaped plug 3 mtr1 x Buzzer 3-28Vdc, 7mA, 85dB at 12Vdc, wire connector2 x Amidon Ferrite Toroids 8µ - 2-40 Mhz1 x Connector female 13A/250V 2mm² IP-68 - 3-polig1 x Icom PMR Radio 16 channels 500mW1 x Bridge cell 600V 2A ROUND (fig.R)1 x Wirewound resistor AX5W 5% - 0.39E1 x Silicon gate CMOS 32,768 Word x 8 Bit STATIC RAM DIL-28W1 x Pos. Reg. 8V 0.1A TO-921 x 10 pcs Carbon Film resistor 1/4W 5% - 33K1 x Trimmer mini small horizontal 1-turn ø6,3mm Carbon 100K3 x RCA PCB receptable angled - black1 x EZBuck™ 3A Synchronous Buck Regulator (o.a rep. VU+ DUO ) SO-84 x Side cutter lenght 128mm1 x Print Fuse Holder 5x20mm e = 22.6 mm - Stelvio1 x Potentiometer mono with 6mm shaft linear-220K2 x MKT capacitor 100nF/100V 7.5mm1 x SI-P 150V 600mA 350mW TO-924 x N Male Clamp type Verzilvert H1000 H2000flex RG213 Aircom plus2 x Wirewound resistor AX5W 5% - 10E1 x Lamp Ba7S socket ø7 x 20mm -24V/100mA1 x Li-Ion Battery, 2550mAh for NX-200-3001 x Motor run 5.0 uF 425 V M8 Faston Ø28 x 55 mm ±5%1 x SI Varicap 12V 440-540pF1 x 8 Chnl.Analog Multiplexer/Dem1 x N-fet 60v 0.3a 0.8w 5r TO-921 x SmartLife Water Control and Irrigation System, Bluetooth, IP542 x Two-wire Palm Microphone with Earpiece1 x Tantalum Cond SMD 33uF 10V 7.3x4.3mm1 x 14 Stage Bin. Counter2 x DIN socket - 7-pole print right-angled - Lumberg1 x DC Powerplug ø5,5/ø2,1mm short1 x Potentiometer stereo log 6mm shaft metal - 25K - Piher - PB free6 x 4 Bit Bin. Up/Down Counter1 x DIN chassis part male screw version 4-pole4 x Coil, 150-9689452, Dimension: 7x7mm,Uitgesoldeerd1 x Cordless telephone Profoon DECT with 2 handsets1 x Trimmer top adjust Ø 15mm 1M - Piher - RoHS1 x Styroflex Capacitor. 120PF - FFI - 5X11mm - AX1 x FM Stereo Decoder DIL-143 x Automotive bladefuse mini 3A - Violet1 x CB Mobile Whip Stainless Steel, 113 cm, 200 Watts1 x Power cord CB 2 pins with lock [dd]1 x Zenerdiode 250mW 11V SOT-231 x Neon indicatorlight 12x16mm 230V - white1 x Bourns Cermet trimmer 25-turn top-adjust 20E QIL (3296Y-1-200)2 x Ceramic capacitor 10pF 100V e=2,54mm4 x Amidon Powder iron toroides 8µ - 5-40 Mhz1 x Ceramic. multilayer 220pF 50V X7R 10% e=5,0mm1 x Quad 2 Inp. NOR Gate DIL-142 x SI N-Chnl. FET 30V 300mW TO-921 x Power cord with molded plug1 x SMA Male Clamp type Aircell 71 x Micro-Fit 3.0 Female housing connector 6-polig1 x Foam cleaner for equipment4 x Suppression filter for cables Ø6.5mm1 x 10 pcs Resistor 0805 - 330E1 x Programmable Opamp. SO-81 x DC Powerplug ø5,5/ø2,1mm short1 x AC/DC CONV, BUCK-BOOST/FLYBACK, (7pins) DIL-84 x MKT Capacitor 330nF/63V 5mm3 x 10 pcs Mini Resistor 1/8W SFR16T - 5% - 680K33 x NPN 45V 100mA 300mW TO-921 x Fuse ø6,3x32mm slow-blow - 630mA3 x AAA x6 Battery Case TK-3501,TK-2000,TK-3000,TK-3501, TH-K20e1 x Fuse ceramic 6.3x32mm fast 30A/250V1 x Inductor 1206 5% 1000mA - 47nH1 x Opamp. 1Mhz, 1x36V Temperature Range:-40°C to +105°C DIL-81 x Styroflex Cond. 100PF - 630V - 1% - PHILIPS - 3.7X9.3mm - AX1 x Flame proof safety resistors 0.7 w 10% 0E822 x Printing pen ø1.0x10mm silver plated per 100 pieces1 x Banana plug ø4mm with cross hole - red - Hirschmann 930 726 1001 x Cable 5P-DIN Male => 2x RCA Female (pin 3&5) 0.2m Blister1 x Wirewound resistor 3W 5% - 2K21 x Wi-Fi smart plug, current meter, schuko type F, 16A1 x Japanese potentionmeter 10K mono-logarithmic with serrated shaft1 x TR5 Fuse Slow 2,5A - RoHS1 x MKT Capacitor 33nF/63V 5mm1 x Multiple output voltage regulators1 x DIN cableplug metal - 5-pole 240°1 x CR2430, Ø24.5x3.0mm 3.0V 270mAh Solder Horizontal PCB2 x Compact container for 6 x KSC-35se charger.1 x Mobile Scanner Antenna 30 - 1200Mhz 46cm long Mirror Clamp2 x Pos. 3A Adjustable Reg. TO-2201 x Polyamide spacer zwart M3 int/int, length 15mm1 x Satellite cable with 2x F-Male connector 1.5m white 75 Ohm1 x Pliers for connecting wires to LSA strips1 x Varta 4920 1.5V Ø34,2X61,5mm D, Mono, LR201 x 7 NPN Transistor Array DIL-163 x quad 2-input or gate2 x CB Amplifier 12-14VDC, 25-30Mhz 200W1 x IR Pre Amplifier1 x BNC Right Angle Male Clamp RG58U1 x 6-way charger for the batteries KNB-35L/26N/25A1 x Labory socket panelmount ø4mm - white2 x TNC Female Double Bulkhead1 x Timer Circuit DIL-81 x NPN 45V 100mA 300mW TO-923 x Fan 60x60x25mm 12Vdc 39,9m³/uur 33,5dBA - vapolager1 x SI-N 100V 4A 40W1 x 3.5 mm stereo jack socket panel mount - Marushin - RoHS1 x KPI Twilight switch for Bulb and PLC1 x Cable BNC Male => BNC male 75 Ohm 3m1 x 10 pcs Mini Resistor 1/8W SFR16T - 5% - 1M2 x Labory plug ø2,6mm with side-entry - green1 x 10 pcs Resistor 1206 - 1K22 x SI-P 90V 50mA 300mW TO-921 x Elco axial 22uF/25V ø4,5x10mm1 x Metal 19pins HDMI plug with 24K gold plated connector1 x Styroflex Capacitor. 370PF - 160V - 2.5% - 3.5X11mm - AX1 x Elco radial 4,7uF/63V 5x11mm e=2mm 105°1 x Extension cable set 4m1 x Japanese potmeter 50K mono-linear with serrated shaft52 x President Walker 2 CB transceiver 40 Multi Channels FM/AM34 x Alan 121 CB transceiver 40 Multi Channels FM/AM  1 x MKT Capacitor 470nF/63V 7mm1 x Styroflex Capacitor. 56PF - G500 - 3X10.5mm - AX37 x UHF Male Twist on type RG58U6 x Ceramic capacitor 2,7pF 100V NP0 e=5,08mm42 x Elco axial 4,7uF/100V ø4,5x10mm1 x PNP 50v 0.2a 0.5w TO-921 x Coil, YXE10857AIA, size:10x10mm2 x Banana plug ø4mm with cross hole - Black1 x Rocker with green lights - 12V / 6A33 x Alan 48 Pro CB Transceiver 40 Multi Chan. FM/AM 1W/4W 12/24V42 x Elco axial 100uF/100V ø10x30mm40 x Cooler for TO-5, TO-39 large black24 x PNP 45V 100mA 300mW T0-922 x D-Sub connector PCB 2,54mm receptable straight - 15-pole1 x 10 pcs Carbon Film resistor 1/4W 5% - 8K21 x Ceramic. multilayer 22nF 50V X7R 10% e=5,0mm2 x Metalfilm resistor 0,4W-1%-120K3 x President Lincoln2 Transceiver CB/10/12mtr FM/AM/LSB/USB38 x Elco axial 220uF/100V ø12,5x30mm2 x Ceramic. multilayer 330pF 50V X7R 10% e=5,0mm41 x President Teddy CB transceiver 40 Multi Channels FM/AM ASC  33 x Alan 78 Pro CB Transceiver 40 Multi Chan. FM/AM 1W/4W 12/24V34 x CB Mobile Mount DV27, Whip Fibreglass Black, Length 62cm, 20W1 x K72 Silicone spray 200ml4 x D-Sub connector PCB 2,54mm plug straight - 15-pole1 x DV Antenna mount6 x Ceramic. multilayer 68nF 50V X7R 10% e=2,5mm2 x Elco radial 100uF/35V 6,3x11mm e=2,5mm 105°30 x DIN mounting for Midland Alan 78+Multi, President Kenji1 x IEC Device 220V Angled plug RA cord and angled contra 2mtr40 x Soldering tip TCP screwdriver short 0.7/1.6mm 370°C 541127991 x Brass spacer M5 int/int, length 18mm1 x Quad 2 Inp. NAND Gate DIL-141 x Micro-Fit 3.0 Female housing connector 2-polig1 x NTC ø5,5mm max. 10% - 10E1 x Chassis mounting hole for mounting 11 x Positive voltage regulator adjustable (LM317HV ) TO-2202 x D-Sub connector receptable solderversion - 25-pole2 x 10 pcs Carbon Film resistor 1/4W 5% - 22K1 x AC - 12VDC with cigarette lighter socket adapter2 x MKT Capacitor 12nF/63V 5mm1 x Antenna connector PL to DV1 x Microcontroller 8-bits, 1kB Flash 0.064kB EEPROM DIL-81 x 5V Single Supply 10b DAC SO-281 x Three SI Varicap 32V 230-280pF2 x Mini-DIN cable receptable plastic - 8-pole - Lumberg1 x Replace tip for Solderstation 20-30, Ø 5.3MM - Ø 3MM 45°.1 x Carbon film resistor 3W ø6,5x17,5mm 5% - 15E1 x Ceramic. multilayer 33pF 50V NP0 5% e=5,0mm1 x Ceramic. multilayer 270pF 50V X7R 10% e=5,0mm1 x NPN silicon high voltage transistor7 x SI-P 100V 2A 30W TO-2201 x SMA Female to BNC Female1 x Wing bolt with nut for DV Antenna1 x NPN 30V 0,1A 0,5W TO-921 x Earphone with clamp 3.5mm conn. (KMC25)3 x Ceramic capacitor 60nF e=5,08mm1 x Elco radial 220uF/100V 18x35mm e=5mm 105°2 x Taktswitch 6,2x6,2x9,5mm 1,6N1 x BNC Female to RCA Phone Plug Lumberg2 x Ceramic. multilayer 8,2nF 50V X7R 10% e=5,0mm2 x Pressure switch make - ø15mm - solder - black1 x Metalfilm resistor 0,4W-1%-2K7 x Ceramic capacitor 2,7pF e=2,54mm1 x PNP Transistor 60V 5A 65W TO-2202 x Small Signal Diode, Single, 100V, 200mA, 1V, 4ns, 500mA SOD-3231 x Automotive bladefuse mini 25A - Naturel1 x Elco radial 47uF/35V 5x11mm e=2,5mm 105° ( 35ZLH47MEFC5X11 )1 x Soldering tip cleaner Abrasive brass wool3 x Mini-DIN plug plastic - 8-pole1 x Carbon film resistor 1/2W 5% - 220K2 x Fuseholder Panelmount for ø5x20mm1 x IC socket gold plated machined dil 10p e=7,62mm1 x SI-N 180V 150mA 800mW TO-56 x Ceramic. multilayer 68nF 50V X7R 10% e=5,0mm2 x Taktswitch 6,2x6,2x5,0mm 1,6N1 x N Male Clamp type RG213U1 x Ceramic capacitor 3,3pF 100V NP0 e=5,08mm2 x Mini-DIN chassis part female 8-pole panel mounting1 x FM/AM IF Amp. DIL-224 x Hirschmann KOKA799 Digital TV-Radio coaxcable white 75 Ohm p/mtr1 x 3-wire lapel mic with earphone1 x SI-P 120V 100mA 300mW TO-922 x Amidon Powder iron toroides 6µ - 10-100 Mhz3 x Adapter BNC (M) -> 2x Banana (F)3 x opamp 2x +-22v 3mhz 1v/us Dil-83 x Carbon film resistor 1/2W 5% - 100E3 x 10 pcs Capacitor 0805 -12pF1 x Fuse ceramic 5x20mm Slow 3,15A/250V2 x Carbon film resistor 3W ø6,5x17,5mm 5% - 39E3 x Ferrite choke inductor, 2½ turns, Z=680 ohm @ 100MHz2 x MKT Capacitor 1,2nF/63V 5mm6 x DIN mounting for President Walker-2 , Richard2 x Micro-Fit 3.0 Female crimp terminal AWG20-241 x BNC T type Three Female2 x Elco Axial 47uF/250V ø18x30mm 85°1 x Crystal 17.734Mhz - HC 49/U dim. W11.05 x D4.7 x H13.5mm1 x Metalfilm resistor 0,4W-1%-5K624 x CB SWR/Powermeter, 26 - 30 MHz, Max 100 Watt1 x UHF Double Female2 x Choke coil radial 150mH barrel black smooth1 x Safety Labory plug ø4mm - black3 x Amidon Ferrite Toroids 125µ Ø 21 mm 0,2-15Mhz (=4C65-Ø24mm)2 x Twist drill HSS - DIN 338 - ø1,2mm (p / pc)1 x 7pF 350V ±1% Unelco Metal Clad Capacitor1 x Single Muff Headset with Boom Microphone1 x 7 Seg. Numeric led display1 x Microphone Holder metal with magnetic attachment2 x Li-ion Battery (7.2V - 1,520 mAh type)1 x Ceramic capacitor 47pF 100V 2% NP0 e=5,08mm2 x GE Diode 90V 50mA DO-71 x Digital multimeter with automatic range adjustment1 x Ceramic. multilayer 1uF 50V X7R 10% e=2,5mm1 x 4C6, 120µ, Ø 14mm, purple1 x 6 W mono Bridge Tied Load (BTL) audio amplifier SIL-94 x MKP capacitor 4,7uF 275VAC, R 27,5mm R46KR447050M2K Kemet2 x Battery Charger - Rapid 6-Way2 x Ceramic capacitor 220pF e=5,08mm1 x Crystal 9.216Mhz - HC 49/U dim. W11.05 x D4.7 x H13.5mm1 x 10 pcs Capacitor 0805 -39pF1 x Foil trimmer 7 - 105pF 3pin Grid 10mm violet Right angled1 x Foil Trimmer 5.5 - 15pF 3pins Grid 10mm blue3 x UHF NEXEDGE/DMR/Analogue Portable Radio with GPS/Bluetooth3 x Trimmer top adjust Ø 15mm 2,5M1 x PNP 50v 0.2a 0.5w TO-921 x Banana plug ø4mm with cross hole - Red1 x v-comp 4x 36v 1.3us DIL-141 x Ceramic capacitor 22pF 100V NP0 e=2,54mm2 x Thyristors logic level - 0.8A, 400V TO-921 x Rugged handheld microphone-speaker including TK-2000 TK-30001 x TV Male Hirsman KOSWI31 x Wirewound resistor 3W 5% - 1K5 ø5,5x13mm1 x Elco axial 47uF/25V ø6x10mm1 x Ceramic capacitor 820pF e=2,54mm3 x Safety Labory plug ø4mm - yellow1 x Amidon Ferrite Toroids 850µ ø61mm 40Mhz- 400Mhz1 x Elco radial 3,3uF/100V 5x11mm e=2,5mm 105°1 x N-Chnl. J FET 40V 10mA TO-921 x SI-N 40V 200mA 350mW TO-923 x 10 pcs Carbon Film resistor 1/4W 5% - 1K21 x SI-N 30V 20mA 100mW TO-922 x Ceramic capacitor 3,3pF e=2,54mm2 x MKP Capacitorr 680nF/275VAC R 27,5mm1 x Lamp Ba9S socket ø10 x 28mm - 12V/250mA1 x Ceramic capacitor 33pF 5% 1kV e=5mm3 x Ceramic. multilayer 27pF 50V NP0 5% e=5,0mm1 x 10 pcs Resistor 1206 - 47K2 x Amidon Ferrite Toroids 850µ Ø 21 mm 20-250Mhz4 x NTC ø5,5mm max. 10% - 10K2 x Ceramic capacitor 3,9pF e=2,54mm1 x Diac 28-36V 2A DO-411 x D-Sub connector plug solderversion - 25-pole1 x Audio Power Amp. Vcc 16V DIL-81 x Clip microphone with Earphone and PTT1 x Deutsch DT 2 Pin Black Connector Kit 18-161 x 5pF 500V ±1% Unelco Metal Clad Capacitor1 x Bourns Cermet trimmer 25-turn top-adjust 50K QIL (3296Y-1-503)1 x Triac 4A 600V DPAK1 x Speaker 5W 8 Ohms, Incl holder, cable with 3.5 mm plug.4 x CB Mobile Mount DV27, Speciaal voor kunststof dak, Length 114cm1 x Nexedge limited keypad and Display Digital UHF FM Portable1 x Microcontrollers 8BIT CMOS,MCU,OTP 8KX14,USB,A/D , SO-281 x Crystal 156.700Mhz - HC 25/U dim W11.05 x D4.7 x H13.5mm receive1 x Trim flat screwdriver 0.9x15 Ceramic Blade2 x Diode 1000V/1A DO-411 x Ceramic capacitor 180pF e=2,54mm1 x Neg. Reg. 24V 0.1A TO-922 x BNC Double Female1 x Carbon film resistor 1/2W 5% - 100K1 x Ceramic capacitor 1nF 20% 1kV e=5mm1 x Japanese potmeter 10K mono-linear with serrated shaft1 x Printed circuit board single sided 10x16 cm1 x Styroflex Capacitor. 15PF - 500V - 1% - EMZ - 3.5X11mm - AX1 x Carbon film resistor 1W 5% - 33K1 x Very Low Noise Opamp DIL-81 x 10 pcs Carbon Film resistor 1/4W 5% - 330E2 x N Female Chassis Clamp type RG2132 x Eurobox 95x135x45mm black2 x Button Black Ø 24.5mm with white point Axes hole Ø 6mm2 x BNC Male Clamp type AIRCOMM1 x Crystal 60.750Mhz - HC 17/U dim. W19.4 x D8.95 x H19.8mm1 x SMB Double Male Gold1 x Solder support 4-way1 x Ceramic capacitor 56pF 200V 5% e=2,54mm3 x bcd to 7 segm decoder/dr.1 x presettable up/down cntr DIL-163 x Mounting Wires ø0,5mm 10m - orange - solid - blister1 x Mounting thread ø0.5mm 10m - gray - solid - blister1 x N-Chnl.MOSFET 500V 8.7A 0.7 ohm TO-2201 x Panelmount receptable for DC powerplug ø2,1mm1 x Ring Terminal 5,0mm Blue2 x CB Mobile PL Mount Length: 143cm, Power: 200 Watts2 x Beltclip TK3501, TH-K20/K401 x NTC zeskant schroef M3 1K2 x Amidon Ferrite Toroids 850µ ø35.6mm 1-50 Mhz1 x SI-P 60V 7A 30W TO-2201 x Foil Trimmer 5.5 - 65pF 3pins Grid 10mm yellow1 x CR1220, Ø12.5x2.0mm, 3.0V, DL1220, BR12202 x Fuse Holder for Blade Fuses2 x Ceramic capacitor 470pF 10% 1kV e=5mm1 x Ring Terminal 4,0mm Yellow2 x Female 36 pin single row pin header, pitch: 2.54mm, H: 11.2mm3 x MKP Capacitor 220nF/275VAC R 22,5mm1 x 3-to-8 Line Inverting Decoder/Demultiplexer DIL-161 x Ceramic capacitor 10nF 20% 1kV e=5mm1 x 3.5 mm stereo jack socket with switch square print2 x SI-N 60V 150mA 400mW TO-921 x IC socket gold plated machined dil 8p e=7,62mm1 x Ceramic. Multilayer Axial 220nF 50V2 x Elco axial 47uF/40V ø6x10mm2 x UHF Male Clamp type RG2131 x SMA Female to BNC Male2 x Banana chassis part ø4mm 16A 60V Black 930 099 1011 x Crystal 4,000Mhz - HC 49/U dim. W11.05 x D4.7 x H13.5mm2 x N Male Clamp type RG59U2 x Wirewound resistor AX5W 5% - 8K21 x Pig nose ferrite 2 holes 14x14x8mm Hole large Ø3.4mm1 x Reed contact 0.25A/3W 1xmake ø2.54x14.0mm1 x dual btl power driver DIL-161 x Differential Video Amp.Dil-83 x TNC Male to BNC Female1 x 4-bit full adder SO-161 x PCB relay SPCO 16A - e= 5mm - 24Vac1 x Potentiometer with ø6mm schaft plastic stereo-lin 25K1 x 10 pcs Capacitor 1206 - 68pF1 x Heat shrink tubing ø 9.5 - 4.7mm black p/mtr1 x USB-C male to USB-C female 60W 4K-60Hz 5Gbps1 x Fuseholder Panelmount for ø5x20mm slit1 x Convert a USB-C port to an RJ45 port1 x Dual opamp 15v 0.8w DIL-81 x General-Purpose Static RAM - Standby VCC Current 100uA SO-281 x 16-chn analog mux/demux DIL-241 x VHF Digital Analogue NEXEDGE Porto1 x Carbon film resistor 1W 5% - 100E1 x NPN 30V 0,1A 0,5W TO-921 x Ceramic capacitor 10nF e=5,08mm2 x Pos. Reg. 15V 1A TO-2203 x Ceramic capacitor 1nF e=2,54mm1 x Cover Encloser Plastic 85 x 56 x 41.4mm grey1 x AC Adapter 12 Volt 7A for BC-121N (=BC-124)1 x Coroplast isolation tape 4.5mtr 15mm Wide Black1 x Solder support 7-way1 x Fuse ø5x20mm slow-blow - 315mA / 250V2 x SI Varicap 28V 4-5.6pF1 x Slideswitch 36/24mm 250Vdc/3,0A - 2x wissel1 x SMD trimmer 6.5pF-30pF 100V 4x4.5x2.7mm Green1 x Mini-DIN receptable PCB angled - 7-pole1 x 9W Wirewound resistor 15K 10% 9x9x38mm Vitrohm - RoHS1 x MCCFB2410TFF/10 10A, 250V, 125V, Fast Acting 6.5x2.8mm1 x Fuse ceramic 5x20mm Slow 5A/250V2 x Autoconnector Fastin-Faston 4-pole male - white1 x Resistor Network 4x22E SIL-51 x Wirewound resistor 3W 5% - 6E81 x Robust handheld microphone speaker.1 x Adapter USB A female <-> PS2 male1 x Panel Fuse Holder 5x20mm slot - Littlefuse1 x Ultra fast recovery rectifier for general purpose DO-2141 x Polymeric PTC Resettable Fuse 15V 2A Ih Surface Mount 2-SMD1 x Quad Line Driver DIL-141 x MKT Capacitor 22nF/63V 5mm1 x SI Varicap 28V 2.0-2.3pF1 x Flame proof safety resistors 0.7 w 10% 0E331 x Data control cable 6 X 0.14mm foreclosure (MY 194) p/m.1 x Optotriac ISO 5.3KV DIL-61 x Pro Soft TORX screwdriver TX30 with hole1 x Fuse ceramic 5x20mm Slow 4A/250V1 x SI-N 160V 600mA 350mW TO-921 x Set of 10 jumper cables 1x Female en 1x Female 15cm1 x Ceramic capacitor 33pF 100V e=2,54mm1 x DC Powerplug ø5,5/ø2,1mm long1 x Coil, 100-112-89273, size: 10x10mm1 x Fuse ø6,3x32mm slow-blow - 15A1 x Incotech DCH1040 K1-clip microphone with earphone D model1 x Toggle switch 10A/250V ø11.95 single pole on-off1 x Wirewound resistor 25W 1% 1.5 E1 x Slideswitch 20/11mm 150Vdc/0,1A - 1x wissel1 x Die cast aluminum cabinet 111.5 x59, 5x31mm naturel - Hammond1 x Lf Pwr Amp. 12V 5.5W TO-220-51 x SI-N 170V 15A 150W TOP-31 x Ø5mm blinking yellow diffused 565nm 18mcd1 x arco426 - 30 - 250pF - 20x10mm1 x Throat microphone for PMR handheld transceiver including Kenwood1 x Quad 2 Input NOR Gate SO-141 x Fitting screw 20A Blue1 x Voltage Reference 2.45V1 x N-Chnl.MOS FET 180V 10A TO-1271 x Varistor SIOV - S10 K250 250V 0,40W ø12,0x4,8mm1 x RP-TNC Male to SMA Female.1 x Labory socket panelmount ø2,6mm - yellow1 x Wirewound resistor 50W 1% 0.27 E1 x Bipolar Transistors BJT NPN Hi-Curr High Spd 250V 180W TO-247-31 x Metalfilm resistor 0.4W-1%-180E-RoHS1 x Metalfilm resistor 0.4W-1%-464E-RoHS1 x Spacer plastic M3 - 20mm - black1 x Ceramic capacitor 1,8nF e=2,54mm1 x Neon indicatorlight 12x16mm 230V - green1 x Styroflex Capacitor. 270PF - 630V - 1% - AX1 x Universal Fast Charger USB-C Automatic Volt Selection 20Watt1 x SI-N 120V 50mA 500mW TO-921 x Elco radial 0,47uF/100V 5x11mm e=2,5mm 105°1 x Wirewound resistor 25W 1% 82E1 x TR5 Fuse Slow 4A1 x Extension cable 220V 3x1.5mm² 3mtr White with protective earth1 x Elco radial 33uF/100V 18x35mm e=2,5mm 105°1 x Video Amplifier1 x Coil, 169S1605, 10.7Mc, size: 5x5mm1 x Styroflex Capacitor. 1NF5 -125V -CA5% -10X6mm -AX1 x N-Chnl.MOSFET 20V 30mA SOT-1031 x quad 3-state nand latch DIL-161 x Potentiometer with ø6mm schaft plastic mono-log 250K1 x 220V euro power cable 1mtr with figure eight 2x0.75mm²
Closed.
Manufacturers
PMR Handy 8 kan. 500mW
PMR Handy 8 kan. 500mW
$220,81 now $115,66
Reviews
2SC3030
2SC3030
$6,95

Origineel onderdeel. Werkt perfect, goed verpakt en snel gel...