-->rn

Conditions of Use

    OF:
    HAJÉ Electronics
    Oude Kerkstraat 7
    6325EE Berg en Terblijt
    The Netherlands

    Hereinafter to be referred to as: user.

Article 1    Definitions

  1. In the present general terms and conditions, the following terms are used in the sense given below, unless explicitly indicated otherwise.

  2. User: the user of the general terms and conditions.
    Buyer: the user's opposite party, acting in the course of a business or in the course of a profession.
    Agreement: the agreement between the user and buyer.

Article 2    General

  1. The stipulations of the present terms and conditions shall apply to each and every offer and agreement between user and a buyer, to which user has declared the present terms and conditions applicable, insofar as parties have not explicitly deviated from the present terms and conditions in writing.
  2. The present terms and conditions shall also apply to all agreements with user, the execution of which calls for the services of third parties.
  3. The buyer's general terms and conditions shall only apply if parties have explicitly agreed in writing that said general terms and conditions shall apply to the present agreement with the exclusion of the present general terms and conditions. In that event possibly still conflicting stipulations in the user's and buyer's general terms and conditions shall only apply between parties, if and in so far that they are a part of user's general terms and conditions.
  4. If one or more stipulations in the present general terms and conditions should be null and void or declared null and void, then the other stipulations of the present general terms and conditions shall remain fully applicable. The case ensuing, user and buyer shall enter into negotiations to agree upon new stipulations replacing the null and void conditions, or, as the case may be, the conditions declared null and void, whereby the purpose and the meaning of the original conditions shall be heeded as far as possible.

Article 3    Offers and Tenders

  1. All offers shall be free of obligation unless the offer contains an acceptance term.
  2. The offers made by user shall be free of obligation; they shall be valid for a period of thirty days, unless indicated otherwise. User shall only be bound by the offers if the acceptance thereof is confirmed in writing by the buyer within thirty days.
  3. Terms of delivery given in user's offers shall only be tentative and exceeding these terms of delivery shall not entitle buyer to dissolution or damages, unless explicitly agreed upon otherwise.
  4. The prices given in above-mentioned offers and tenders shall be exclusive of VAT and other government levies, as well as of shipment costs and possible packaging and administration costs, unless explicitly stated otherwise.
  5. If the acceptance deviates (on secondary items) from the offer given, user shall not be bound by it. The agreement shall in such event not be concluded in accordance with said deviating acceptance, unless user indicates otherwise.
  6. A compound quotation shall not oblige user to execute part of the assignment against a corresponding part of the given quotation.
  7. Offers and tenders shall not apply automatically to repeat orders.

Article 4    Execution of the Agreement

  1. User shall execute the agreement to the best of his knowledge and ability.
  2. If and in so far required for the proper execution of the agreement, user shall have the right to have certain work done by third parties.
  3. The buyer shall see to it that user shall be provided in due time with all data which user has said to be necessary or which the buyer must in all reasonableness understand to be necessary to the execution of the agreement. If user has not been provided in due time with the data necessary to the execution of the agreement, user shall have the right to suspend the execution of the agreement and / or to charge the buyer for the additional costs resulting from the delay at the generally accepted rates.
  4. User shall not be liable for damage of whatever nature caused by the fact that user worked on the basis of incorrect and / or incomplete data provided by the buyer, unless user should have been aware of said incorrectness or incompleteness.
  5. If parties have agreed that the agreement will be executed in stages, user can suspend the execution of the parts belonging to a following stage until the buyer has approved in writing the results of the stage prior to it.
  6. If user or third parties engaged by user within the scope of the assignment do work at buyer's site or at a site designated by buyer, buyer shall provide the employees having to work there free of charge with all facilities desired in all reasonableness by said employees.
  7. Buyer shall safeguard user against possible claims filed by third parties who may sustain damage attributable to buyer in connection with the execution of the agreement.

Article 5    Delivery

  1. Delivery shall be made ex works/store/warehouse of user.
  2. If delivery is made on the basis of the "Incoterms", the "Incoterms" valid at the moment the agreement is concluded, shall apply.
  3. Buyer shall be held to take delivery of the goods the moment that user delivers them to him or has them delivered, or the moment at which the goods are put at buyer's disposal under the agreement.
  4. If the buyer refuses to take delivery or fails to give the information or instructions necessary to the delivery, user shall be entitled to store the goods at buyer's risk and expense.
  5. If the goods are serviced, user shall be entitled to charge possible service charges. Said service charges shall then be invoiced separately.
  6. If, in the framework of the execution of the agreement, user requires data to be given by the buyer, the term of delivery shall commence after the buyer has provided user with said data
  7. If user has given a term of delivery, it shall only be indicative. A given term of delivery shall therefore never constitute a term to be observed on penalty of forfeiture of rights. If a term is exceeded, the buyer must give user notice of default in writing.
  8. User shall be entitled to deliver the goods in parts, unless such is deviated from in writing in the agreement or if the partial delivery does not represent an independent value. User shall be entitled to invoice the thus delivered goods separately.
  9. If execution of the agreement in stages has been agreed upon, user can suspend the execution of the parts belonging to a following stage until the buyer has approved in writing the results of the stage prior to it.

Article 6    Samples and Models

  1. If a sample or model has been given to buyer, then the assumption is that such has been given by way of indication only, unless parties agree explicitly that the product to be delivered shall correspond with it.
  2. In the event of purchase of immovable property, the surface area or other measurements and indications given shall also be assumed to be merely indicative without any obligation to have the product to be delivered correspond with it.

Article 7    Inspection & Complaints

  1. Buyer shall be held to examine the delivered goods (to have the delivered goods inspected) the moment of delivery (handing over), but in any case in as short a period of time as possible. In this respect, buyer must examine whether the quality and the quantity of the delivered goods comply with what was agreed upon, or at least whether they meet the requirements applying to said goods in normal (business) transactions.
  2. Buyer shall check all delivered goods and in particular semi conductors and transformers, before using them.
  3. Possible visible shortcomings must be communicated in writing to user within three days following delivery. Non-visible shortcomings must be reported within three weeks following their detection but no later than 12 months following delivery.
  4. If in accordance with the previous paragraph, buyer files his complaint in due time, he shall still be held to take delivery and effect payment of the goods purchased. If buyer wishes to return defect goods, he shall do so following prior consent in writing from user.

Article 8    Remuneration, Price and Costs

  1. If user and buyer have agreed upon an administered price, user shall nevertheless be entitled to increase said price.
  2. User shall be allowed among others, to charge on price increases if changes in price have occurred between the moment the offer was made and the moment of execution of the agreement with respect to, e.g., exchange rates, salaries and wages, raw material, semi-finished products or packaging material.
  3. The prices given by user shall be exclusive of VAT and other government levies, as well as of the other expenses to be possibly made within the scope of the agreement, including shipment and administration costs, unless stated otherwise.

Article 9    Changes to the agreement

  1. If it is shown during the execution of the agreement that the work to be done needs to be changed and / or supplemented in order to ensure its proper execution, parties shall adapt the agreement accordingly in due time and in mutual consultations.
  2. If parties agree that the agreement needs to be changed and / or supplemented, this decision may influence the time of completion of the execution. User shall inform the buyer thereof as soon as possible.
  3. Should the change and / or supplement to the agreement have any financial and / or qualitative consequences, user shall inform buyer thereof in advance.
  4. If a fixed rate has been agreed upon then user shall indicate the degree to which the change or supplement to the agreement will result in an increase of said fixed rate.
  5. Contrary to the conditions governing this matter, user shall not be able to charge additional costs if the change or supplement is the result of circumstances attributable to user.

Article 10    Payment

  1. Payment must be made within 14 days from the date of invoice, in a way to be indicated by user and in the currency in which the goods were invoiced. Contestation of the amount of the invoices shall not suspend the fulfilment of the payment obligation
  2. User has the right to require payment in advance, cash, as require certainty for payment from the buyer
  3. If buyer fails to fulfil his payment obligation within the term of 14 days, then buyer shall be in default by operation of law. In that event, buyer shall owe an interest of 1% per month, unless the statutory interest rate is higher, in which case the statutory interest rate shall apply. The interest on the amount due and payable shall be calculated as from the day the buyer is in default until the moment he has paid the amount in full.
  4. User's claims against buyer shall become due on demand in the event that buyer is wound up, attached, declared bankrupt, or if a suspension of payment is granted.
  5. User shall be entitled to have the payments made by the buyer go first of all to reduce the costs, subsequently to reduce the interest still due and finally to reduce the principal sum and the current interest. User shall have the right, without this leading user to be in default, to refuse an offer for payment, if the buyer designates a different sequence of attribution. User shall be entitled to refuse full payment of the principal sum, if said payment does not include the interest still due, the current interest and the costs.
  6. User has the possibility to charge a credit limitation surcharge of 2%. This surcharge will not be charged if payment is made within 7 days from the date of invoice.

Article 11    Retention of Title

  1. All goods delivered by user, possibly also including designs, sketches, drawings, films, software, (electronic) files, etc., shall remain user's property until buyer has fulfilled all of his obligations under all agreements concluded with user.
  2. Buyer shall not be authorised to pledge or encumber in any way the goods falling under the retention of title.
  3. If third parties seize goods delivered subject to retention of title or wish to establish or assert a right to them, buyer shall be held to inform user thereof as soon as can reasonably expected.
  4. The buyer shall undertake to insure the goods delivered subject to retention of title and to keep them insured against damage caused by fire, explosion and water as well as against theft and make this insurance policy available for inspection on first demand.
  5. Goods delivered by user falling under the retention of title by virtue of the stipulations under 1. of the present article, may only be sold on within the framework of normal business activities and must never be used as instrument of payment.
  6. In the event that user wishes to exercise his ownership rights mentioned in the present article, buyer shall give user or third parties to be appointed by user, now for then, unconditional and irrevocable permission to access all sites and locations where user's property might be found and to take these goods back.

Article 12    Guarantee

  1. User shall guarantee that the goods to be delivered shall meet the usual requirements and standards that can be set for and made upon them.
  2. The guarantee mentioned under 1 shall equally apply if the goods to be delivered are destined for use abroad and if the buyer explicitly informed user of this use in writing the moment the agreement was entered into.
  3. The guarantee mentioned under 1 shall be valid for a period of 6 / 12 months following delivery. (see 6.)
  4. If the good to be delivered does not comply with said guarantee, user shall, at his discretion, replace or see to the repair of the good, within a reasonable period of time following receipt thereof, or, if the good cannot be returned in reason, following notification of the defect by the buyer. In the event the good is replaced, the buyer shall already now undertake to return the replaced good to user and to transfer ownership to user.
  5. The guarantee mentioned for this purpose shall not apply when the defect originated as the result of injudicious or improper use or when the buyer or third parties have introduced changes or tried to introduce changes to the good without user's consent in writing or if they have used it for purposes for which the good was not intended.
  6. If the guarantee given by user concerns a good produced by a third party, the guarantee shall be limited to the guarantee given by the producer of the good.

Article 13    Collection Charges

  1. If the buyer fails to fulfil his obligations (in due time) or defaults on them, then all reasonable costs incurred to have all extrajudicial costs and debts paid shall be borne by the buyer. If the buyer remains in default of payment within the set time period, he forfeits a immediately payable fine of 15% on the amount due at that moment. This with a minimum of € 50.
  2. If user demonstrates that he has incurred higher expenses, which were necessary in reason, said expenses shall also qualify for reimbursement.
  3. The reasonable judicial and execution costs possibly incurred shall equally be borne by buyer.
  4. Buyer shall owe interest over the made collection charges.

Article 14    Suspension and Dissolution

  1. User shall be authorised to suspend the fulfilment of the obligations under the agreement or to dissolve the agreement, in the event that:
    • buyer does not fulfil or does not fully fulfil his obligations resulting from the agreement
    • after the agreement has been concluded, user learns of circumstances giving good ground to fear that the buyer will not fulfil his obligations. If good ground exists to fear that the buyer will only partially or improperly fulfil his obligations, suspension shall only be allowed in so far the shortcoming justifies such action.
    • buyer was asked to furnish security to guarantee the fulfilment of his obligations resulting from the agreement when the contract was concluded and that this security is not provided or insufficient. As soon as security is furnished, the authorisation to suspend shall lapse, unless said fulfilment has been unreasonably delayed because of it.
  2. User shall furthermore be authorised to dissolve the agreement (have the agreement dissolved) if circumstances arise of such a nature that fulfilment of the obligations becomes impossible or can no longer be demanded in accordance with the requirements of reasonableness and fairness, or if other circumstances arise of such a nature that the unaltered maintenance of the agreement can no longer be demanded in all reasonableness.
  3. If the agreement is dissolved, the user's claims against the buyer shall be forthwith due and payable. If user suspends fulfilment of his obligations, he shall retain his rights under the law and the agreement.
  4. User shall always retain the right to claim damages.

Article 15    Return of Goods Put at Buyer's Disposal

  1. If user has put goods at buyer's disposal during and in connection with the execution of the agreement, buyer shall be held to return the delivered goods within 14 days in their original state, free of defects and in their entirety. If buyer fails to fulfil this obligation, all resulting costs shall be at buyer's expense.
  2. If, for any reason whatsoever, buyer still remains in default to fulfil the obligation mentioned under 1. after being warned to do so, user shall be entitled to recover the resulting damage and costs, including replacement costs, from buyer.

Article 16    Liability

  1. If the goods delivered by user are defective, user's liability vis à vis the buyer shall be limited to the arrangements made in the present terms and conditions under "Guarantee".
  2. If user is liable for direct damage, then said liability shall be limited to a maximum of the amount of the statement of expenses, at any rate that part of the agreement to which the liability relates. User's liability shall at all times be limited to a maximum equalling the amount of the payment to be made by user's insurer in the occurring event.
  3. Direct damage shall be understood to be exclusively:
    • the reasonable costs incurred to establish the cause and the volume of the damage, in so far said establishment relates to damage in the sense of the present terms and conditions
    • the reasonable costs possibly incurred to have user's faulty performance meet the conditions of the agreement, unless such faulty performance cannot be attributed to user;
    • the reasonable costs incurred to prevent or limit the damage, in so far buyer demonstrates that said costs have led to the limitation of direct damage as meant in the present general terms and conditions.
  4. User shall never be liable for indirect damage, including consequential damage, loss of profit, lost savings and damage due to business stagnation.
  5. The limitations of liability for direct damage contained in the present terms and conditions shall not apply if the damage is due to intentional act or omission or gross negligence on the part of user or his subordinates.

Article 17    Transfer of Risk

  1. The risk of loss of, or damage to the products being the subject of the agreement, shall be transferred to buyer the moment said products are judicially and/or actually delivered to buyer and therefore fall into the power of buyer or of third parties to be appointed by buyer.

Article 18    Force Majeure

  1. Parties shall not be held to fulfil any of their obligations if they are hindered to do so due to a circumstance through no fault of their own and which cannot be attributed to them by virtue of law, a legal action or generally accepted practice.
  2. In addition to the provisions of the law and the judge-made law in this respect, force majeure shall in the present general terms and conditions furthermore be understood to be any external circumstance, be it envisaged or not, on which user cannot have any influence but which prevents user from fulfilling his obligations. Industrial action at user's company shall also be understood to be a circumstance of force majeure.
  3. User shall also be entitled to invoke force majeure if the circumstance rendering (further) fulfilment of the obligation(s) impossible, commences after the point in time on which user should have fulfilled his obligation.
  4. Throughout the duration of the circumstances of force majeure, parties shall be entitled to suspend the fulfilment of their obligations. If this period lasts for more than two months, either of the parties shall be entitled to dissolve the agreement without any obligation to pay the opposite party damages.
  5. Insofar user has already partially fulfilled his obligations resulting from the agreement at the moment the circumstance of force majeure commenced or shall be able to fulfil them and insofar separate value can be attributed to the part already fulfilled or still to be fulfilled respectively, user shall be entitled to invoice the part already fulfilled or still to be fulfilled respectively. The buyer shall be held to pay this invoice as if it were a separate agreement.

Article 19    Safeguarding

  1. The buyer shall safeguard user against claims filed by third parties concerning intellectual property rights on material or data provided by the buyer, which shall be used for and during the execution of the agreement.
  2. If the buyer provides user with information carriers, electronic files or software etc., the former shall guarantee that said information carriers, electronic files or software are free of viruses and defects.

Article 20    Intellectual Property and Copyrights

  1. Without prejudice to the other stipulations of the present general terms and conditions, user shall reserve the rights and authorities to which user is entitled under the Copyright Act.
  2. The buyer shall not be allowed to introduce changes to the goods and material provided, unless the nature of the delivered goods and material dictates otherwise or if agreed upon otherwise in writing.
  3. The designs, sketches, drawings, films, software and other material or (electronic) files, possibly produced by the user within the framework of the agreement, shall remain user's property, irrespective of the fact whether they have been handed over to the buyer or to third parties, unless agreed upon otherwise in writing.
  4. All documents, such as designs, sketches, drawings, films, software, (electronic) files, etc., provided by user, shall be destined to be used by buyer exclusively and must not be reproduced, made public or brought to the notice of third parties by buyer without prior consent from user, unless the nature of the documents provided dictates otherwise.
  5. User shall reserve the right to use the knowledge gained due to the execution of the work for other purposes, in so far no confidential information shall be brought to the notice of third parties when doing so.

Article 21    Secrecy

  1. Both parties shall be bound to secrecy of all confidential information they have received within the scope of their agreement from each other or from another source. Information shall be considered to be confidential if the other party has indicated so or if the confidential character results from the nature of the information.
  2. If a statutory provision or a judicial decision compels user to convey confidential information to third parties designated by law or by the court and user cannot for that purpose invoke a legal right to refuse to give evidence or such a right acknowledged or allowed by the competent court, user shall not be held to pay damages or compensation and the opposite party shall not be entitled to demand the dissolution of the agreement on the ground of any damage resulting from said circumstance.

Article 22    Non-employment of the opposite party's personnel

  1. Throughout the duration of the agreement and for one year following termination thereof, buyer shall not in any way, hire or employ in any other way, be it directly or indirectly, staff of user or of enterprises whom user has engaged to execute the present agreement and who are (were) involved in the execution of the agreement, without prior proper businesslike consultation on this matter, all this in accordance with the requirements of reasonableness and fairness.

Article 23    Disputes

  1. The Court in user's place of business shall have exclusive jurisdiction to hear actions, unless the District Court is the competent Court. User shall nevertheless be entitled to submit the dispute to the Court deemed competent by the law.
  2. Parties shall only refer the matter to the court if they have done their utmost to solve the dispute in mutual consultations.

Article 24    Applicable Law

  1. Dutch law shall apply to each and every agreement between user and the buyer. The Vienna Sales Convention shall be explicitly excluded.

Article 25    Changes to the Terms and Conditions, interpretation and their location

  1. The present terms and conditions have been filed at the office of the Chamber of Commerce in Maastricht, under number 14621286.
  2. The Dutch version of these general terms and conditions prevails at all time in case of disputes with regard to the interpretation and purpose of these terms and conditions.
  3. The most recently filed version shall always apply, or, as the case may be, the version valid at the time the agreement was concluded.
    Berg en Terblijt , November 2015
    HAJÉ Electronics
    J.J.M. Biermans
7 x Elco radial 10uF/35V 5x7mm e=2mm 105°( 35ZLG10MEFC5X7 )4 x Ø4,7mm red diffuse perpendicular 627m 28mcd9 x Earphone plug adapter.4 x Metalfilm resistor 0.4W-1%-300E7 x NPN 50V 0,1A 0,3W 300MHz TO-183 x Elco radial 100uF/400V 18 x 36mm, 105°C3 x Ceramic capacitor 270pF 100V e=2,54mm5 x Chassis section single-gage panel mounting ex 5.5 / inw 2.5mm9 x Dual Opamp. SIL-82 x Temperature-compensated voltage regulator for 12V fans3 x Elco axial 22uF/25V ø4,5x10mm3 x Snap-In Elco 85° 6800uF/50V 30x40mm2 x TV signal processor-Teletext decoder with embedded m-Controller6 x Schottky barrier diodes 30V, 200mA, 200mW DO-356 x SI-N 30V 100mA 300mW7 x Buzzer 3-28Vdc, 7mA, 85dB at 12Vdc, wire connector5 x FME Splice Male to Male4 x USB cable connector solder type B6 x SI-N 20V 100mA 300mW TO-184 x Ceramic capacitor 330pF e=2,54mm7 x Jack socket 3.5mm Stereo Female - Female glit9 x Buzzer 1-13Vdc, 20-30mA, wire connector4 x ø3mm Low Current (2mA) red diffused 627nm 2.8 mcd5 x Opamp. 22V Temperature Range:0°C to +70°C, DIL-84 x TV Sound IF Amp./Demod.5 x SI-P 100V 2A 30W TO-2205 x Transistor socket 3 contacts10 x Built-in Push Switch Make Black Double Pole 19X125 x Printing pen ø1.0x10mm silver plated per 100 pieces3 x Labory plug ø4mm with side-entry solder - red3 x Elco Axial 68uF/16V ø6x10mm5 x Universal dual USB charger, ideal for charging mobile phones,etc3 x PTC B59995-C120-A70 30V 13E - Epcos - RoHS2 x Metalfilm resistor 0,4W-1%-7E56 x BC-119N Attachement for IC-M11 x Amidon Powder iron toroides 6µ - 10-100 Mhz2 x NPN Transistor 60V 2A 30W TO-2201 x Hex Inverting Driver OC DIL-166 x Hex Bus Driver 2 Enable Inp.TS4 x SI-N 30V 30mA 400mW TO-922 x Quad 2 Input NAND Gate Dil-142 x DRAM dual-ported controller2 x Octal Bus Trnsciver/Reg.TS inv7 x NPN silicon high voltage transistor2 x MKT Capacitor 220nF/63V 5mm2 x 60 V, 115 mA, small signal MOSFET2 x Quad 2 Input Exclusive OR Gate2 x J-K Negative edge triggered F/F2 x Octal D Flip-Flop Pos. Trig.TS4 x N-fet-dg 20v 30ma .2ghz 2 SOT-1032 x NPN 30V 0,1A 0,5W TO-924 x SI-N 30V 25mA 300mW TO-922 x SI-P 30V 25mA 250mW3 x LOGIC COMPLEMENTARY INVERT DIL-142 x 10-Bit D-type Register, non inverting6 x PNP Transistor 50V 0.05A TO922 x 4 bit Parallel Acces Shift Reg2 x quad 2-input nand gate DIL-143 x 7 NPN Transistor Array DIL-162 x 4-2-3-2 Inp. AND OR Inv. Gate2 x Bus transceivers (3-State)2 x Dual JK2 x Dual JK1 x Dual Monostable Multivibrator DIL-161 x SI N-Chnl. FET 30V 300mW TO-922 x hex buffer2 x Dual 4 Input Expander2 x 8BIT MCU FLASH,Flash:4KB ,RAM:128Byte , DIL403 x Quad Analog Switch DIL-141 x SI-N 60V 1.5A 8W TO-1262 x Dual JK3 x FLIP FLOP LOGIC IC SO-202 x Triple 3 Inp. NAND Gate3 x IC socket gold plated machined dil 14p e=7,62mm2 x Octal D Transparent Latch TS DIL-204 x PNP 30V 0,1A 0,5W TO-921 x PNP 60V 1A 0,7W TO-391 x 10 pcs Carbon Film resistor 1/4W 5% - 22K2 x Octal Bus Transceiver DIL-241 x SI-P 25V 100mA 300mW TO-182 x MOS FET 20V 100 MHz FP-41 x RCA panelmount receptable - red2 x Octal Bidirectional Transceiver with 8-Bit Parity Generator/Chec3 x PNP 25V 100mA 300mW TO-921 x SI-N 45V 2A 25W2 x 3-to-8 line Decoder/Demultiplexer DIL-166 x Quad 2 Inp. Exclusive NOR Gate1 x PNP 45V 100mA 300mW TO-923 x quad 2-inp nand gate DIL-142 x Optotriac 3,75kV Uin max:400V zonder nuldoorgangs-detectie DIL-62 x 8 bit Priority Encoder2 x Quad 2 Input NAND Gate OC DIL-142 x Hex inv. buffer DIL-163 x Quad TS Buffer Low Enable DIL-141 x 3 Step AF/RF Amplifier2 x Dual 2-Wide 2-Inp.AND-OR-Invrt2 x SI-N 20V 30mA 300mW TO-923 x n-fet 60v 0.115a 0.2w 7e53 x si-n 120v 1a 10w 120mhz TO-1261 x Elco radial 3,3uF/100V 5x11mm e=2,5mm 105°3 x Metalfilm resistor 0.4W-1%-680E2 x Elco radial 47uF/100V e=2,5mm 105°4 x SI-P 300V 1A 1W TO-54 x SI-P 50V 150mA 400mW TO-922 x SI-N 50V 200mA 300mW TO-92klein1 x Hex Inverter9 x SI-P 150V 50mA 800mW TO-924 x Elco radial 330uF/63V 13x21mm e=5mm 105°1 x N-fet 60v 0.3a 0.8w 5r TO-921 x Metalfilm resistor 0.4W-1%-4K7-RoHS4 x Clip microphone with Earphone and PTT2 x N-Chnl. J FET 25V 100mA TO-924 x SI-N 120V 400mA 1.75W TO-2203 x Elco radial 220uF/63V 10x20mm e=5mm 105°1 x SI-N 25V 30mA 150mW TO-922 x USB cable for Sync and charge your I-Phone4 x Quad 2 Input Exclusive OR Gate DIL-142 x SI-N 60V 150mA 400mW TO-922 x Ø5mm Orange 610nm water clear 2490mcd3 x SI-P 120V 1A 10W TO-1261 x Low Nois Opamp.1 x Removes flux residue from printed circuit boards1 x dual jk flip flop DIL-142 x Quad 2 Input NOR Gate DIL-142 x 10 pcs Carbon Film resistor 1/4W 5% - 820K2 x Dual Very Low Nois Opamp. DIL-81 x 4-bit bi-stable latch DIL-161 x Hex Schmitt Trigger Dil-143 x TV vertical deflection output circuit TO-2205 x SI-P 120V 100mA 300mW TO-925 x SI-N 180V 150mA 800mW TO-57 x SI-N 60V 15A 115W TO-36 x Replace tip for Solderstation 20-30, Ø 5.3MM - Ø 3MM 45°.4 x Ceramic. multilayer 270pF 50V X7R 10% e=5,0mm1 x Quad 2 Input NOR Gate DIL-144 x Carbon film resistor 3W ø6,5x17,5mm 5% - 15E3 x SI-N 30V 800mA 800mW TO-181 x Jack female connector stereo 3.5 mm plastic - Lumberg - RoHS1 x arco466 - 70 - 480pF - 20x15mm5 x Loose soldering iron for soldering 20/302 x NPN 20V 100mA 300mW SOT-253 x GE-P 15V 10mA 60mW TO-721 x hex inv buff driv op. col DIL-162 x Quad 2 Input Schmitt Trig.NAND3 x Elco axial 10uF/63V ø6x10mm4 x 16 bit Data Select./Multiplex. DIL-244 x IC socket gold plated machined dil 16p e=7,62mm4 x Replace tip for Solderstation 20-30, Ø 5.3MM - Ø 0.5MM1 x 10 pcs Resistor 0805 - 5M62 x GE-P 15V 10mA 60mW TO-725 x SI N-Chnl. FET 30V 300mW TO-921 x Zenerdiode 500mW 6V8 SOD-80C3 x Transistor socket 4 contacts1 x Varistor SIOV - S20 K230 230V 1,00W ø21,5x5,1mm3 x GE-P 12V 200mA 220mW TO-11 x Labory socket ø4mm - black2 x SI-N 250V 100mA 800mW2 x Power cord with molded plug2 x 7 Seg. Numeric led display1 x SI-P 40V 800mA 800mW TO-51 x 10 pcs Resistor 0805 - 2M23 x Replace tip for Solderstation 20-30, Ø 5.3MM - Ø 2MM1 x 10 pcs Resistor 0805 - 3M31 x NPN 45V 100mA 300mW TO-922 x 4 Bit Bin. Up/Down Counter2 x quad 2-input or gate1 x Elco axial 47uF/100V ø8x18mm2 x ø3mm Low Current (2mA) 590nm yellow diffused 1.8 mcd1 x DC Powerplug ø1,7xø4mm JSAP-22 x Varta 4903 1.5V Ø10,5X44.5mm AAA, Micro, LR03, Mini penlite1 x Dual Op-Amp Audio 8MHz 20V/us DIL-81 x Varistor SIOV - S20 K60 60V 1,00W ø21,5x4,4mm1 x Ring Terminal 4,0mm Blue2 x IC socket gold plated machined dil 24p e=7,62mm4 x SI-P 90V 50mA 300mW TO-923 x SI-P 90V 50mA 300mW TO-923 x Ceramic. multilayer 220pF 50V X7R 10% e=5,0mm2 x PNP 30V 0,1A 0,5W TO-921 x USB 3.0 Memory Stick 128GB 80 Mbps read / 10 Mbps write2 x Microcontroller 8bit 32KB 20MHz DIL-281 x Micro-Fit 3.0 Female housing connector 2-polig1 x Schottky diode sb-d 100V 0.1A DO-351 x Wirewound resistor 3W 5% - 100E ø5,5x13mm1 x Potentiometer ø6mm schaft plastic mono-log 100K1 x Labory socket ø4mm - blue1 x Wi-Fi smart IP camera within HD 1080p2 x Double Blncd. Mixer/Osc. DIL-81 x 10 pcs Carbon Film resistor 1/4W 5% - 470E1 x 12 Volt car equipment with a 24 Volt battery (240W)1 x Inverting HEX Buffer OC1 x Crystal 10.000Mhz - HC 49/S dim.W11.05 x D4.7 x H2.5mm1 x Elco radial 33uF/100V 18x35mm e=2,5mm 105°1 x FM Stereo Decoder DIL-142 x Smd Trimmer Resistors 4mm 0.25W 500K SIDE ADJ4 x Carbon film resistor 1/2W 5% - 390K1 x SCART plug to 3 RCA sockets (audio / video) + S-VHS + switch1 x BNC Male Clamp type RG591 x Cable strain relief ø5-6,8mm, drill hole ø10mm - white1 x Brass spacer M3 int/int, length 12mm1 x SI-N 60V 150mA 400mW TO-924 x Elco radiaal 100uF/25V ø8x7mm e=2,5mm 105°3 x Ceramic. multilayer 68nF 50V X7R 10% e=5,0mm1 x Twinaxial Male Terminator 50 Ohm1 x 3.5 mm stereo jack plug with metal gland1 x Amidon Ferrite Toroids 8µ - 2-40 Mhz1 x V377, Ø6.8x2.6mm, 1.55V, GP377, SR66, D377, SR626SW, RW329, AG41 x Soft Recovery Ultrafast Plastic Rectifier 1000V 3A 75ns DO-2011 x Elco axial 22uF/63V ø6x10mm1 x Trimmer side adjust 10mm 25K1 x Fuse ø5x20mm slow-blow - 1A / 250V1 x Sitecom ADSL Modem and Wireless 4-port1 x SI-N 15V 30mA 200mW TO-721 x Semiconductor DIL-161 x MKT Capacitor 470nF/63V 7mm1 x Ceramic capacitor 56pF 200V 5% e=2,54mm2 x Choke resistance model 22mH 5%1 x Quad Precis/ CMOS Opamp. DIL-141 x Coil, E526HNA100078=4683, 100Mhz, Q=105, L/C=0.28uH, 10x101 x SWR cable 45cm with on both sides a PL plug2 x High-grade all-round spraying oil1 x 6.3 mm stereo jack plug plastic - Lumberg - RoHS1 x ap v-reg 1.25-125v 0.7a TO-2201 x Microphone panelmount plug 8 pins1 x Flame proof safety resistors 0.7 w 10% 47E1 x SI-N 450V 10A 90W TO-220 iso3 x 56763 NIMH 1.2V, 1000mA, AAA,R03,Micro,Mini Penlite(Ø10.5x44,5m)2 x LNB for reception of Astra 1 + Astra 3 (4 out) for 78/88cm1 x Ceramic capacitor 820pF e=5,08mm1 x Styroflex Capacitor. 50PF - 500V - 10% - RUWEL - 3.5X10mm - AX2 x Trimmer side adjust 15mm 2,5K1 x Fuse ø5x20mm slow-blow - 4A / 250V1 x Elco axiaal 10uF/100V bipolair 8x18mm2 x 8bit Parallel-In/Serial-Out Shift Register SO-161 x Metalfilm resistor 0.4W-1%-19K61 x Crystal 4,000Mhz - HC 49/U dim. W11.05 x D4.7 x H13.5mm3 x Zener 1.3W 10V DO-2044 x Set QRM Eliminator 2Mhz-50Mhz. Incl parts and PCB1 x RCA plug - RCA plug1 x Snap-In Elco 85° 100uF/450V 25x35mm2 x 2 x female connector RJ-45 1:1 Lumberg2 x Fan 60x60x25mm 24Vdc 34dBA 39,9m³/uur - slide bearing Sunon1 x Ceramic. Multilayer Axial 47nF 50V1 x Hex inv. buffer DIL-161 x Ceramic. Multilayer Axial 33nF 50V2 x Elco radial 100uF/25V 6,3x11mm e=2,5mm 105°2 x F Female to UHF Male2 x Microswitch 6A/250Vac with 17,5mm lever1 x Dual Diff. Line Driver1 x Ratchet crimping plier for non insulated terminals1 x Kenwood TK3501 e PMR446 incl.KNB-45 Battery & Charger KSC-352 x Bridge cell 600V 2A ROUND (fig.R)1 x Programmable Opamp. SO-81 x Clixon open 160c / close 130c2 x 6x inverting buffer DIL-141 x Lightweight Headset1 x Solder lug M2 triple1 x Pliers for connecting wires to LSA strips1 x Fuse ceramic 5x20mm slow 2.5A/250V1 x ø3mm Low Current (2mA) green diffuse 565nm 1.8mcd 60°1 x Low frequency power silicon NPN transistor 70V 2.0A TO-664 x SI-N 100V 6A 65W TO-2201 x Carbon film resistor 1/2W 5% - 470K1 x Cable strain relief ø5-6,8mm, drill hole ø10mm - black1 x President Walker 2 CB transceiver 40 Multi Channels FM/AM1 x Jack plug 3.5 mm mono metal with tulle - Marushin1 x Resistor Network 9x220E SIL-103 x Dual Opamp. 36V 1mhz 0.8v/us DIL-82 x Dil reed relay 1xchange 5Vdc - 200E with diode7 x Elco radial 100uF/16V 5x11mm e=2,5mm 105°1 x Pos. 3A Adjustable Reg. TO-2201 x Speaker for the IC-7300 & IC-R86002 x Silicone measuring cable ø0.75mm² Black P/mtr1 x Making wiring diagrams and drawings permeable1 x Styroflex Capacitor. 150PF - 160V - 3.2X7mm - AX1 x Elco radial 47uF/35V 5x11mm e=2,5mm 105° ( 35ZLH47MEFC5X11 )1 x Fan 92x92x25mm 230Vac 37dBA slide bearing Sunon1 x KBC2508W BRIDGE CELL 800V 25A SQUARE FASTON (fig. F)1 x FM IF Amp. with Muting DIL-161 x NPN transistor 40V 6A 67W Low frequency power silicon TO-31 x Amidon Ferrite Toroids 2000µ ø35.6mm 1kHz- 1Mhz1 x E10 tubular lamp ø10 x 28mm - 6,5V/100mA1 x 3.5 mm stereo jack socket with switch square print2 x High Speed HDMI Connector - VGA Female 15-Pins 0.20 m Black1 x 6.3 mm stereo jack socket + 2 switch2 x Print transformer EI66 30VA/230V 2x15V/2x1000mA BV EI 662 10952 x Coil resistormodel 0,33uH 10%2 x Self-healing fuse 5A, 35x30mm W54-XB1A4A10-51 x MKT Capacitor 3,3nF/63V 5mm1 x FME Female to DV27 Female1 x Triple 3 Inp. NOR Gate1 x DB104 Bridge 400V 1A DIL-4 (afb.D)1 x opamp 2x 1mhz 0.3v/us DIL-81 x NPN 20v 1a 0.8w 100mhz1 x ø3mm bi-polar green/yellow 3-terminals common cathode1 x 4.5 Mhz Discriminator1 x Pilotlamp ø6,4 x 30mm - 8V/300mA1 x Fuse ø5x20mm fast - 630mA / 250V2 x Ceramic capacitor 270pF e=5,08mm1 x Push to print pin 1.3mm silver plated 100pieces3 x Fan 60x60x25mm 12Vdc 25,0dBA 39,9m³/uur - ball-bearing Sunon2 x Mini piezo siren 6-12Vdc, 140mA, 107dB, wire connector1 x Eminent Ethernet PCI card 10/1002 x 10.7 MHz Filter 3pens2 x U3000, µ, Ø 11mm, green1 x Duplexer 1.6-470 / 900-1300Mhz2 x SI-N 80V 500mA 625mW TO-921 x Elco axial 100uF/100V ø10x30mm2 x USB 2.0 Cable type A M/F 5m2 x Metalfilm resistor 0.4W-1%-3K6-RoHS2 x 10 pcs Resistor 1206 - 39K1 x Quad Bilateral Switches DIL-141 x Hex D Flip-Flop1 x Sub-D connector solder male 9-pin - Assmann - RoHS1 x SMA Female to TNC Male1 x Single Muff Headset with Boom Microphone1 x Styroflex Capacitor. 110PF - 500V - 2.5% - EMZ - 3.5X11mm - AX1 x Pcb Mini-USB type A 5 pole4 x Keypad microfoon1 x Ceramic. multilayer 33pF 50V NP0 5% e=5,0mm1 x Stroke switch 4.2x2.8mm 2N IP40 Momentary SMD1 x HP 963 (3JA23AE) Cyan Ink Cartridge (original)1 x Lightweight Headset with Boom Microphone & PTT1 x Notebook 220v 3-pin power cable 1.8m black4 x Sound Card Interface D-Sub 9 Female1 x HP C6658AN Color no581 x Set QRM Eliminator 500Khz-30Mhz. Incl parts and PCB1 x Coil, 150-9064203, size: 7x7mm, soldered out3 x RF Schottky Diode Single 4V 110mA 410mV 0.35pF SOD-3231 x Microphone Holder metal with magnetic attachment1 x Fuse ø5x20mm fast - 80mA2 x Timer Circuit DIL-83 x Elco axial 100uF/25V ø8x11mm1 x Ceramic capacitor 3,3pF e=2,54mm1 x BNC Protective Cap for BNC Female1 x SI-N 25V 25mA 500mW TO-921 x Crimping slip-blue bus isolated 6.3 mm.1 x Ceramic. multilayer 560pF 50V X7R 10% e=5,0mm1 x SMD trimmer capacitor 2.5pF-30pF 100V 4x4.5x2.7mm Black1 x Zenerdiode 400mW 12V SOD-272 x Elco radial 330uF/50V 10x30mm e=5mm 105°1 x Elco axial 2200uF/63V ø21x40mm1 x Rocker switch cord brown 4Amp1 x 2m-70cm Mobile transceiver 144-145&430-440Mhz1 x Potentiometer ø6mm schaft plastic mono-log 47K2 x Crimping pin flat plug 4,8mm Red Male2 x Japanese potmeter 50K mono-linear with serrated shaft2 x Connector female 13A/250V 2mm² IP-68 - 3-polig3 x Terminal block coupling strip 2.5mm² - 12-fold1 x Fuse ø6,3x32mm slow-blow - 2A3 x Trimmer top adjust Ø 10mm 10K1 x Telephone cord flat 2x RJ11 Male 5mtr white1 x 10 pcs Resistor 0805 - 27E2 x Standard mobile microphone with RJ45 connector1 x NPN 45V 100mA 300mW TO-181 x Canon CLI-551GY gray ink cartridge (original)1 x Push to print pin 1.3mm silver plated1 x Multi kabel tester UTP,FTP.SFTP and coaxcable2 x Power Connector 2.5 mm right angle - Lumberg - RoHS1 x Positive voltage regulator adjustable (LM317HV ) TO-2201 x Crystal 3,6864Mhz - HC 49/S dim.W11.05 x D4.7 x H2.5mm1 x SI-N 30V 50mA 250mW TO-921 x President Johnson CB transceiver 40 Multi Channels FM/AM  1 x Bluetooth headset for Icom ID5100e, IC-A16E-BT, IC-A25NE1 x Lamp Ba7S socket ø7 x 20mm -24V/125mA1 x 6.5 MHz Discriminator1 x Printing pen ø1.0x10mm silver plated1 x 10 pcs Carbon Film resistor 1/4W 5% - 1.5E1 x N-Chnl. J FET 20V 10mA TO-921 x Coil resistormodel 8,2uH 10%1 x Ceramic capacitor 15pF e=2,54mm1 x D-Sub connector PCB 2,54mm plug straight - 15-pole3 x Foil Trimmer 2.5 - 7.5 mm red 27pF 3pins Grid1 x Semiconductor DIL-242 x 6.3 mm stereo jack socket open 3 contacts1 x Lamp Ba7S socket ø7 x 20mm - 6V/100mA1 x Ceramic capacitor 2,2nF 20% 1kV e=5mm3 x Ledholder neglected reflector 8mm1 x N Male Clamp type RG58U1 x Silicon Diode 100V 3A DO-2011 x Helmset with 2 flat plastic waterproof earbuds2 x Pushbutton switch miniature (NO)- ø7mm- solder - green1 x MKP capacitor 1uF 275VAC, R 46mm2 x Heatsink 20,5x19x19,5mm - black1 x Wirewound resistor 25W 1% 15E1 x Solder support 3-way1 x Styroflex Capacitor. 560PF - F250 - 3X9mm - AX1 x SI-N 180V 70mA 900mW TO-921 x Elco axial 22uF/350V ø15x30mm1 x MKT Condensator 820nF/100V 10mm1 x 5V, 150mA (max) three terminal positive voltage regulator TO-92L2 x 10 pcs Carbon Film resistor 1/4W 5% - 220K1 x Logic IC function:Presettable Synchronous 4b Bin Counter SO-161 x Original Bearcat Antenna angled with BNC connector1 x Soldering support 10-fold1 x Metalfilm resistor 0,4W-1%-11K51 x Simple Melody Generator (For Elise) TO-922 x si-n 230v 1a 20w 100mhz TO-220iso3 x Alan M20 CB transceiver 40 Multi Channels FM / AM1 x N-Chnl. MOS FET 160V 7A TOP-31 x Coil, 77261, size: 10x10mm1 x Operational Amplifier, 1 Amplifier, 4.5MHz, 9V/µs, 4Vto36V DIL-81 x Quad 2 Input NOR Gate DIL-141 x Fuse ø5x20mm slow-blow - 2A / 250V1 x Polyurethane glass sleeve 13mm inw white p/mtr2 x AA batt.pack TK 2160, TK-/2170, TK-21401 x Carbon film resistor 1/2W 5% - 1E7 x TV Sound IF Amp./Demod. DIL-141 x Styroflex Capacitor. 80PF - 160V - 2.5% - 2.5X7mm - AX2 x E10 tubular lamp ø10 x 28mm - 12V/170mA1 x Foil Trimmer 2 - 15pF 2pins Grid 5.5 mm yellow1 x Cool Profile 42.7 x50x12, 5mm - black1 x D-Sub connector PCB angled 2,54mm receptable - 37-pole1 x LDO-spanningregelaars REGULATOR 3.3V 1A TO-2201 x 5mm blue 3200mcd 30mA non-diffuse angle: 16° 470nm1 x Temperatue Fuse 105°C/10A1 x RJ-45 plug shielded with wire guide1 x Simple handheld VHF radio with 16ch.1 x Transistor NPN 80V 1.5A 8W SOT-321 x Charger cradle with bluetooth function for IP-501H1 x Elco radial 4,7uF/450V e=2mm 105°1 x Mobile Magnetic base CB antenna, incl. 4m cable and PL plug1 x Speaker mike with volume knob and earphone jack. 2p. Alan 421 x NPN 45V 100mA 200mW TO-2361 x Tantalum Capacitor 3,3uF/16V 20% e=2,51 x Set of 6 jumper cables 1x Female and 1x Female 13cm2 x Speaker 7W 8 Ohm, with holder and cable with 3,5mm jack plug.1 x Metal film resistance 0.4W-1%-22K2 x CB SWR/Powermeter, 26 - 30 MHz, Max 100 Watt1 x Rever microphone with Inear earplug.3 x Fully Wireless Bluetooth Earbuds for Smartphone1 x Varistor SIOV - S20 K460 460V 1,00W ø21,5x6,8mm2 x Diode AFC,15V, 20-25pF, <1.5Ohm1 x Pos. Reg. 12V 0.1A TO-922 x Desoldering wick 2.8mm x 7.5 mtr (10-25L)1 x Amidon Powder iron toroides 10µ - 1-30 Mhz1 x Amidon Powder iron toroides 20µ - 0.2-10 Mhz2 x Elco radial 330uF/25V 8x12.5mm e=5mm 105°1 x AC/DC CONV, BUCK-BOOST/FLYBACK, (7pins) DIL-81 x Ceramic. multilayer 22nF 50V X7R 10% e=2,5mm1 x Solder lug M3 single silvered1 x Ceramic capacitor 120pF e=5,08mm1 x Resistor Network 4x22E SIL-51 x ø3mm orange diffuus 610nm 790mcd1 x SI-N Transistor NPN 15V 30mA 5ghz 19.5db TO-501 x Dual Retrigbl.Monost.Multivbrt DIL-162 x Multifuse 30V 4000mA - Bourns1 x Pressure switch make - ø19mm - solder - black (drill hole 16 mm)1 x Carbon film resistor 3W ø6,5x17,5mm 5% - 1K1 x Ø5mm bi-color red / yellow 2 connections1 x Bullet terminal male 4mm Red1 x D-Sub connector plug solderversion - 25-pole3 x Icom PMR Radio 16 channels 500mW2 x Pos. Reg. 12V 0.5A TO-2202 x Styroflex Capacitor. 390PF - 630V - RDKS - 3.8X9mm - AX1 x N-Chnl. J FET 50V 10mA TO-921 x IC socket gold plated machined dil 10p e=7,62mm1 x NPN power transistor 45V 1W TO-921 x Adj. Micropwr.Volt. Ref. SO-82 x opamp 2x +-22v 3mhz 1v/us Dil-81 x Ledholder 3mm with ring black1 x Wirewound resistor AX5W 5% - 3.3E2 x Battery clip 100A red2 x DIN chassis part female screw version 5-pole 180 °1 x Elco radial 220uF/35V 10x17mm e=5mm 105°2 x Heavy Duty Speaker/Microphone1 x 10 pcs Capacitor 0805 -56pF1 x Zener 1.3W 20V DO-412 x Pinheader 8pins Female single row, pitch: 1.27mm M50-30308421 x T-adapter RJ-45 3xfemale3 x Motorcycle Helmet Speaker/Microphone with Hand PTT TK3301-TK35011 x The ES-5800G V3 is an 8-port Ethernet switch 10/100/1000 Mbps1 x TV Female to RCA Phone Female1 x Silicon Diffused Power Transistor 1500V 8A SOT3991 x UHF 450-470 Mhz Repeater Digitale en analoge repeater1 x Carbon film resistor 1/2W 5% - 15K1 x Solder lug M2 single tinned1 x Speaker 5W 8 Ohms, Incl holder, cable with 3.5 mm plug.1 x Sealing boot / Nickel plated for 600H switches2 x MKT Capacitor 330nF/63V 5mm1 x Desktop omnidirectional polar pattern usb microphone wired1 x MKT Capacitor 22nF/63V 7mm2 x Metalfilm resistor 0,4W-1%-7K51 x Fan 52x52x15mm 12Vdc 27,0dBA 21,06m³/uur slide bearing Sunon1 x Labory socket ø2,6mm with side-entry - yellow1 x Lamp Ba9S socket ø10 x 28mm - 12V/50mA1 x BNC T type Three Female1 x Tantalum Capacitor 15uF/25V 20% e=2,541 x MKT Capacitor 12nF/63V 5mm1 x Heavy duty microfoon. Robuuste microfoon - IP551 x Pinheader 36 pins Male single row, pitch:2.54mm, H:11.2mm1 x Polyurethane glass sleeve 3mm inw white p/mtr1 x Crimping pin flat plug 2,8mm Red Male1 x Belt clip for the Kenwood PKT-23E2 x 10 pcs Mini Resistor 1/8W SFR16T - 5% - 1K2 x Notebook 220v 3-pin power cable 3m black1 x XLR 3P Male chassis mount (solder) smal2 x Elco radial 220uF/16V 6,3x11mm e=2,5mm 105°5 x Wirewound resistor AX5W 5% - 10E1 x 3 transist.+diff.pair DIL-141 x Self-healing fuse30A, 35x30mm W54-XB1A4A10-301 x Die cast aluminum cabinet 118.5 x93, 5x34mm naturel - Hammond1 x SI-P 40V 200mA 350mW TO-921 x SI-N 450V 10A 100W TO-32 x hex inv buff driv op. col DIL-161 x 10 pcs Carbon Film resistor 1/4W 5% - 3.3E1 x triple 3-inp nand gate DIL-141 x Toroidal Core Transformer 50VA 2x 22V/1,13A1 x Bourns Cermet trimmer 25-turn top-adjust 2K QIL (3296Y-1-202)1 x 230V plug RA black with earth pin2 x 20W Power Amplifier TO-2201 x Wirewound resistor 3W 5% - 10E ø5,5x13mm2 x Triple 3 Inp. NAND Gate OC DIL-141 x SMA male to UHF Female2 x Hex Non Inverting Buffer DIL-161 x Dual LF Power Amp. 5.5W SIL-121 x 9W Wirewound resistor 0.22E 10% 9x9x38mm Vitrohm - RoHS1 x Quad Bitateral Switches DIL141 x NPN Transistor 25V 800mA 625mW TO-921 x Fuse ø6,3x32mm slow-blow - 500mA1 x Wirewound resistor 3W 5% - 18E4 x Carbon film resistor 1/2W 5% - 10E1 x Set of 10 jumper cables 1x Female en 1x Female 30cm1 x SI-N 250V 500mA 20W TO-1262 x Microphone cable black flexible 4 x 0.25mm² ø 5mm p/m1 x Carbon film resistor 1W 5% - 47K1 x Magnetic mount ø35mm with 2.4mtr RG174 cable1 x Wall Charger 12V 500 Mah voor IC-E91 & IC-E92D & IC-E80D2 x Dual 4 Inp. OR Gate DIL-141 x Ceramic capacitor 820pF e=2,54mm1 x Microswitch SPDT 10A 250Vac2 x Extension cable 220V 3x1.5mm² 5mtr White with protective earth1 x Fast charger for KNB-55L, KNB-57LM1 x 10 pcs Mini Resistor 1/8W SFR16T - 5% - 3,9E2 x Alan 48 Pro CB Transceiver 40 Multi Chan. FM/AM 1W/4W 12/24V1 x TNC Male to BNC Female1 x Wi-Fi Power Switch, In-Line, Output 220V 16A6 x Microphone Windshield for Boommike HS-PRO221 x Silicon gate CMOS 32,768 Word x 8 Bit STATIC RAM DIL-28W3 x 7-stage binary counter DIL-141 x Ceramic. multilayer 470pF 50V X7R 10% e=5,0mm2 x Boxheader odds 2.54 mm print 10-pole1 x BNC 350-520 Mhz UHF antenna 0.2 mtr1 x 10 pcs Capacitor 0805 - 8,2pF1 x Desoldering pump with heater 30W1 x N-Channel Switch TO-921 x Styroflex Capacitor. 22NF -63V -CA5% -10X15mm -AX1 x Wireless Alarm Set GSM / PSTN - 433 MHz / 95 dB1 x Coax crimp plier for RG58, RG59, RG140, RG141, etc.1 x Led light bars Yellow1 x Car relay 24VDC 40A SPCO1 x Reed contact 0.25A/3W 1xchange ø2.54x14.0mm1 x SI-N 60V 5A 65W TO-31 x Right Angle FME Male to BNC Male1 x PNP Transistor 60V 5A 65W TO-2201 x SI-N 60V 15A 90W TOP-31 x Potentiometer mono with 6mm plastic axle-linear 5M PIHER1 x Ferrule blank ø0.75 x 6mm2 x PA Amplifier F6BQU (8Watt HF) for 20 or 40 meter1 x opamp 4x 30v 1mhz mil.tem1 x Elco radial 220uF/250V 18x40mm e=5mm 105°1 x Speaker with filter 8 Ohm 5 Watt incl. Cable, 3.5 mm plug1 x 10 pcs Resistor 1206 - 270K2 x Elco radiaal 820uF/6,3V 8x11,5mm e=3,5mm 105°1 x Coil resistormodel 56uH 10%1 x Crystal 1.000Mhz - HC 49/U dim. W11.05 x D4.7 x H13.5mm1 x House fuse 16Amp slow D11 per 51 x Elco radial 2200uF/16V 12.5x25mm e=5mm 105° Low ESR1 x Automotive fuse ceramic 5A - Yellow1 x E10 Globular lamp ø11 x 23mm - 6V/350mA1 x Fan 92x92x25mm 24Vdc 83m³/hr 34dBA - slide bearing Sunon1 x Input: 2x RCA Fem to output 1x S/PDIF Fem / 1x TosLink Fem2 x Labory socket panelmount ø4mm 60A - black1 x Banana plug ø4mm with cross hole - Red1 x Brass spacer M3 int/ext, length 20mm3 x Metalfilm resistor 0.4W-1%-1M-RoHS1 x Mini-Fit Jr Terminal female 18-24 AWG wire insulation 1.3-3.1mm1 x Tantalum Capacitor 33uF/35V1 x Wideband JFET Opamp. TO-991 x 18 Stage Static Shift Register DIL-141 x Fuse Holder PCB for ø5x20mm fuses (part 1)1 x Ceramic. multilayer 10nF 50V 10% e=5.0mm1 x 8 pin tube socket Rimlock Draht / Chassis part4 x Opamp. 1Mhz, 1x36V Temperature Range:-40°C to +105°C DIL-82 x N-Chnl.MOSFET 200V 9A TO-2201 x IC socket gold plated machined dil 40p e=15,24mm1 x Dual Low Noise Opamp. SIL-81 x Potentiometer 220E, 1 turns, SMD, 125 mW, ± 20%, 3313J series1 x Coil, 100-076-97423, size: 10x10mm1 x CR1220, Ø12.5x2.0mm, 3.0V, DL1220, BR12202 x Cable Shoe ratchet crimping tool for insulated connectors1 x Tantalum Capacitor 4,7uF/35V 20% e=2,51 x BUFFER/LINE DRIVER SO-561 x Wire wound resistor 5W 5% - 0.27 E ø7, 5x17mm1 x N Male Crimp type ECOFLEX 101 x Fuse ø6,3x32mm slow-blow - 630mA1 x 3 x Ceramic capacitor 10pF 100V e=2,54mm1 x Si NPN Power BJT 100V TO-2181 x NPN 50V 200mA 300mW TO-921 x Metalfilm resistor 0,4W-1%-180K2 x CR2032, Ø20.0x3.2mm, 3.0V, battery standing with isolated edge1 x Chassis 3.5 mm stereo switch to open - Marushin - RoHS1 x IC socket gold plated machined dil 18p e=7,62mm2 x Quad 2 Input NOR Gate DIL-141 x DIN chassis part female screw version 5-pole 240 °1 x Fuse ø5x20mm slow-blow - 63mA / 250V1 x Hood for 9p Sub-D with short screws black - RoHS1 x SI Varicap 30V 2.8-3.2pF DO-351 x Mini-Fit Jr Terminal male 22-28 AWG wire insulation 0.9-1.8mm2 x Coupler ISO 5KV CTR 100% DIL-41 x Coil resistormodel 0,68uH 10%1 x Potentiometer mono with 6mm plastic axle-linear 50K - Piher11 x Adator for 6mm to 4mm shaft1 x Clip microphone with Earphone and PTT1 x 1Mbit (128Kx8) LATCHED EEPROM PLCC-321 x Adapter cable to connect HS94, HS95, HS97 F3002, F40021 x Elco radiaal 470uF/25V 8x14,5mm e=5mm 105°1 x Toggleswitch miniatur ø6,35mm 1-pole momentary-off-momentary1 x Power amplifier with load detection and auto BTL-SE selection2 x Solder tin 0.7mm 60% tin, 40% lead alloy1 x Styroflex Capacitor. 22PF - V - 3.5X11mm - AX1 x Ø5mm red diffused 627nm 23mcd1 x Li-Ion Battery, 1950mAh for NX-200, NX-3001 x Labory socket panelmount ø2,6mm - red1 x MKP condensator 680nF/305VAC R 22mm ( B32923C3684M000 )1 x Extension cable with 2x FME Female 10mtr RG58 Procom1 x Convert a USB-C port to an RJ45 port2 x CR2430, Ø24.5x3.0mm 3.0V 270mAh Solder Horizontal PCB1 x Incotech DZZ14-K4 Earphone D shell, with 2.5mm Right Angle 40cm1 x Schottky diode 100V, 5A, DO-204AR1 x Device Connector 16A 3P female flat cable connector pins1 x Security coaxial cable RG59 + DC power 10 mtr1 x USB cable connector solder type A1 x Multifuse 60V 200mA - Bourns - RoHS1 x Wirewound resistor 25W 1% 1 E1 x Metalfilm resistor 0,4W-1%-5K111 x Leads ø4mm silicon 1mm²/16A IEC - 1mtr - red1 x Microswitch SPDT 15A 250Vac1 x ø3mm bi-polar red/green 3-terminals common cathode1 x Light Bulb Wedge T10 12V7W Large Garden lighting1 x Hex Non-Inverted Buffers with Open-Collector Outputs DIL-141 x Reed contact 0.25A/3W 1xmake ø5x48.0mm1 x Varistor SIOV - S20 K440 440V 1,00W ø21,5x6,7mm2 x arco469 - 170 - 780pF - 20x15mm1 x Reed contact 0.25A/3W 1xmake ø2.54x20.0mm1 x Ceramic capacitor 4,7nF 100V e=5,08mm1 x Bridge 380V 0,8A ROUND (afb.R) ø9x5,1mm1 x FME Male to TNC Female1 x Outside all around antenna for receiving FM signals1 x Li-Ion Battery (1480 mAh)1 x SI-N 60V 1A 750mW 50Mhz TO-51 x DC Power Cable for BC-121 & BC-214DC1 x Zenerdiode 0,5W 33V DO-351 x Pos. Reg. 20V 1A TO-2201 x Tantalum Capacitor 10uF/25V 20% e=2,52 x Smd Trimmer Resistors 4mm 0.25W 50K SIDE ADJ1 x L9110S Motor Driver 12V 800mA2 x MKP Capacitor 220nF/275VAC R 22,5mm1 x Fuse ø6,3x32mm fast-acting - 20A1 x Quad Opamp. DIL*-142 x K60 contact cleaner with lubricating and anti-corrosion effect1 x SI N 20V 30mA 220mW TO-921 x Varistor SIOV - S14 K275 275V 0,60W ø15,5x5,0mm1 x Varistor SIOV - S14 K140 140V 0,60W ø15,5x4,3mm1 x 10 pcs Carbon Film resistor 1/4W 5% - 22E2 x Li-ion Battery 7.4V 1130mA i.a. TK-2000, TK-30002 x Transistor socket 8 contacts3 x Elco radial 100uF/50V 8x11.5mm e=3.5mm 105°2 x vacuum cleaner cord 6mtr 2x0.75mm grey1 x Dipswitch 8-polig1 x Styroflex Capacitor. 1NF -150V -CA20% -4.5X10mm -AX1 x Varistor SIOV - S05 K175 175V 0,10W ø7,0x3,9mm1 x BNC Female Chassis Mount1 x PNP 50V 200mA 300mW TO-921 x zenerdiode 5w 18v CASE17-021 x MKP capacitor 4,7uF 275VAC, R 27,5mm R46KR447050M2K Kemet1 x YUV picture improvement processor based on histogram modificatio1 x Durable lapel-microphone with revolving clip.1 x Panelmount power plug + switch + fuseholder1 x Ferrule blank ø0.50 x 10mm1 x Dual 4 Input AND Gate1 x Trimmer side adjust 10mm 10K - Piher - RoHS1 x Analoge voltage panel meter 30V DC 70 x 60mm2 x Benchtop power supply with fixed voltage 13.8V 7 Amps (9A peak)1 x Stabilized 9V 1Amp with DC plug 5.5 - 2.5mm also for Arduino1 x Automotive bladefuse mini 5A - Beige1 x Elco radial 1500uF/63V 18x35,5mm e=7,5mm 105° ( EEUFC1J152 )1 x Ceramic. multilayer 3,3nF 50V X7R 10% e=2,5mm1 x Carbon film resistor 3W ø6,5x17,5mm 5% - 10K1 x SI-P 25V 1A 900mW TO-921 x Crimping slip-bus yellow isolated 6.3 mm.1 x Styroflex Capacitor. 56PF - G500 - 3X10.5mm - AX1 x Rocker switch 15x21mm 250Vac/6A - 1x aan/uit opdruk 0-I - RoHS1 x Elco radiaal 470uF/25V 8x14,5mm e=5mm 105°3 x 10 pcs Carbon Film resistor 1/4W 5% - 8K21 x Elco radial 2200uF/63V 18x35mm e=7,5mm 105°1 x 4C6, 120µ, Ø 14mm, purple2 x 10 pcs Resistor 1206 - 3,9E1 x White power cord with the well-known 8-shaped plug 5 mtr1 x Ceramic. multilayer 15pF 50V NP0 5% e=5,0mm1 x NPN Darlington complementary silicon power transistor TO-31 x Neon indicatorlight 12x16mm 230V - orange1 x Fan 60x60x25mm 12Vdc 39,9m³/uur 33,5dBA - vapolager1 x Crimping slip duo 6,3mmx0,8mm Red1 x Power Relay DPCO 16A - 6Vdc with 4,8mm faston1 x UHF Digital Handheld with GPS 400-470 MHz, without key pad1 x Mini-DIN chassis part female 8-pole panel mounting1 x Case clamp for auto1 x Metal film resistance 0.4W-1%-13E2 x N-Chnl. J FET 40V 10mA TO-921 x Fitted pressure switch for night light black1 x NTC zeskant schroef M3 4K71 x TV Female Hirsman KOKWI 32 x Soldering tin 60/40 - 50 grams - ø 0.5 mm1 x Tin box HF-tight (WxLxH) 90x120x45mm1 x Analoge voltage panel meter 300V AC 70 x 60mm1 x Dual N channel Jfet1 x A38-X1, µ, Ø 6mm, white / green1 x Triac 600V 6A TO-2201 x Inductor 1206 5% 850mA - 100nH1 x DC Vehicular Charger Adapter (KSC-35S required)1 x Multi wonderspray kontact 401 x Choke coil radial 6u8H round blue1 x Crystal 2.000Mhz - HC 49/U dim. W11.05 x D4.7 x H13.5mm1 x TV simulator produces a light that looks exactly like a TV1 x Coil, KAN-K5659-GO-81374, dim:10x10mm1 x Neg. Reg. 12V 1A TO-2201 x Crystal 10.2400Mhz - HC 49/U dim. W11.05 x D4.7 x H13.5mm2 x Neg. Reg. 5V 0.1A TO-921 x E10 Lamp with lens ø9,5 x 24mm - 2,2V/300mA1 x PCB Measuring bridge Antan III (non-drilling)1 x Triac 600V 8A 10mA TO-2201 x si-n 120v 0.2a 8w 400mhz1 x Connector male 13A/250V 2mm² IP-68 - 3-polig2 x Ø10mm green diffused 565nm 55mcd1 x SMA Male Clamp type Aircell 71 x Pixie 2 kit for the 80mtr (all components and PCB)1 x Metalfilm resistor 0,4W-1%-390K1 x Printed circuit board double-sided 10x16 cm1 x Labory socket panelmount ø4mm 35A - yellow/green1 x Cordless telephone Profoon DECT with 2 handsets1 x UHF DMR Portable1 x Antenna Coaxial Cable 4 m with angled plug DV1 x Flashlight 10W with a light range of 250 meters, battery powered1 x Ø4mm light with 300mm long wires 14V/80mA1 x Schottky diode UHF mixer diode 4V-30mA DO-341 x Crystal 3.2768Mhz - HC 49/U dim. W11.05 x D4.7 x H13.5mm1 x Cable SCART 21P Male - SCART 21P Male 10m Blister1 x NPN 80V 1A 0,75W >50MHz TO-391 x Fan 40x40x6mm 5Vdc 5.2 m³ / h 15dBA Bearing Sunon1 x 10 pcs Mini Resistor 1/8W SFR16T - 5% - 1E1 x Fuse ø6,3x32mm slow-blow - 1,2A2 x CR2430, Ø24.5x3.0mm 3.0V 270mAh Solder Horizontal PCB1 x Coupler1 x Styroflex Capacitor. 100PF - 250V - 2.5% - EMZ - 3.5X11mm - AX1 x Crystal 14.318Mhz SMD HC49SM dim.W11,2 x D4,85 xH3,5mm1 x Prototypingboard 72x47mm1 x Wi-Fi smart IP camera for outside, Turn / Tilt, Full-HD1080p2 x Print transformer EI48 10VA/230V - 2x18V/278mA BV EI 481 11921 x SI-N 200V 2A 30W TO-2201 x Mobile Antenna UHF 370-490 Mhz Chrome with DV Foot1 x Ceramic. multilayer 100nF 50V X7R 10% e=5,0mm1 x Bridge Rectifiers 1000V 2A SO-4 (afb.S)1 x 3P XLR Female cable connector2 x 16A silicon controlled rectifier. Vrsom 125V. TO-220AB1 x Metalfilm resistor 0,4W-1%-2K41 x Bluetooth remote control with microphone dongle 6-pin President1 x Potentiometer mono-lin ø6mm metal shaft - 1K1 x DIN socket-screw version - 3-pin - Lumberg1 x Multiple AC Adapter for charging 6 x PJT23, TK3601D1 x Carbon film resistor 3W ø6,5x17,5mm 5% - 3K31 x Mobile Scanner Antenna 30 - 1200Mhz 46cm long Mirror Clamp1 x Microphone with remote controlled PTT button 6-pin for President1 x Rocker switch White/Red+NEON single pole 30X11 250V 15A1 x E10 Lamp with lens ø9,5 x 24mm - 3,7V/300mA1 x 10 pcs Resistor 1206 - 100E 250mW 200V +/- 1%1 x 10 pcs Capacitor 0805 - 1nF1 x Styroflex Capacitor. 120PF - 63V - 1% - SIEMENS - 3.X7mm - AX1 x Metalfilm resistor 0,4W-1%-4M71 x Transistor NPN 20V 400mA 3.5W T0-51 x 300pF 350V ±1% Unelco Metal Clad Capacitor1 x Remote control for invertor1 x USB Programming cable - Twin-jack Connector1 x Butt disconnector Blue1 x SI-P 45V 4A 40W1 x Spacer plastic M3 - 6mm - black1 x Window clip mounting fixation BNC 2.5m coax1 x Grill for 80 x 80 mm fans - plastic1 x Micro-Fit 3.0 Female crimp terminal AWG20-241 x Satellite dish TDS 80cm 7016 Anthracite Singlepack 1205081 x Pin Diode 30V-100mA DO-351 x Metalfilm resistor 0,4W-1%-3M91 x Tantalum Capacitor 0,15uF/35V 20% e=2,51 x Labory plug ø4mm with side-entry solder - blue2 x Film Capacitors 0.22uF 275VAC (220NF) 10% R 20.3mm KEMET1 x KBU8M Bridge 1000V 8A -ww+ FLAT (afb.A)1 x Vox adapter cable (with external PTT) for IP100H1 x 7pF 350V ±1% Unelco Metal Clad Capacitor1 x Dual Very Low Noise opamp 2x 44v 10mhz 9v/us DIL-81 x SI-P 45V 4A 50W1 x Tantalum Cond SMD 47uF 16V 7.3x6mm1 x SmartLife Water Control and Irrigation System, Bluetooth, IP541 x Set of 10 jumper cables 1x Male and 1x Female 15cm1 x Wirewound resistor 3W 5% - 33E1 x Ceramic capacitor 56pF 2kV e=2,54mm ( F101K25Y5RP6UK5R )1 x Bullet terminal female 4mm Red1 x Measuring pen ø4mm - black1 x Fuse ceramic 5x20mm Slow 3,15A/250V1 x Mosfet N-ch 900V 140W TO-2201 x SI-N 160V 1.5A 20W TO-220iso1 x Temperature fuse Axial 2A 250Vac 102°C1 x Zenerdiode 500mW 5V6 DO-351 x arco426 - 30 - 250pF - 20x10mm1 x UHF Male Clamp type RG2131 x ø3mm blinking red diffused 627nm 19mcd1 x MCCFB2410TFF/10 10A, 250V, 125V, Fast Acting 6.5x2.8mm1 x TTL programmable array logic DIL-201 x Fuse ceramic 6.3x32mm fast 12A/250V1 x color decoder circuit1 x SI-N 250V 1A 1W TO-51 x Mini VGA adapter.HD15 pins female to HD15 pins female1 x 10 pcs Capacitor 0805 - 2,2pF1 x DIN socket - 6-pole print right-angled - Lumberg1 x N Chassisdeel kort1 x SI-P 100V 3A 40W TO-2201 x Zenerdiode 1,3W 20V DO-411 x si-n 1500v 8a 150w 0.7us TO-31 x The ES-5500G V3 is a 5-port Ethernet switch 10/100/1000 Mbps1 x Sub-D connector PCB angled 2.54mm male 9-pin - Assmann - RoHS1 x Antenna UHF 430-470 MHz antenna1 x Electronic transformer for halogen lamps 11.5V 35-105W1 x Li-ion battery (1190mAh) for IC-F1000&IC-F2000&IC-F29SR2 x Micropower Phase Locked Loop DIL-161 x Zenerdiode 0,5W 15V 5% DO-351 x Resistor Network 4x470E SIL-81 x Elco Radial 1uF/100V 20% bipolar Ø5 x 11mm 85°C1 x 27pF 350V ±1% Unelco Metal Clad Capacitor1 x Taktswitch 6,2x6,2x5,0mm 1,6N1 x Elco axial 47uF/40V ø6x10mm1 x MKP Capacitor 100nF 275VAC, R 15mm R.46.KI.3100M11 x BNC Male Terminators 50 Ohm Geisoleerd1 x Wirewound resistor 3W 5% - 68E1 x Speaker 5W 8 Ohm, with holder and cable with 3,5mm jack plug.1 x 10 pcs Carbon Film resistor 1/4W 5% - 39K1 x Volt. Controlled Opamp. SIL-91 x Fuse ceramic 5x20mm Slow 4A/250V2 x Diode 100V/150mA DO-351 x ø1.8mm - 12Vdc - 1560mcd 30° - warm white1 x Antenna connector PL to DV1 x Metal film resistor 0.4W-1%-6K8 ø1.6x3.6mm1 x PCB pin ø1,3x9,7mm silver plated1 x Trimmer mini small horizontal 1-turn ø6,3mm Carbon 5K1 x NTC zeskant schroef M3 47K1 x Fluxpen No Cleaning Lead Free 10ml1 x BNC Right Angle Male Clamp RG58U1 x D-Sub connector PCB angled 2,54mm plug - 25-pole1 x Table distribution box 2 Fold White with RA and 3mtr cord1 x Coil, 291CN-T1057-95068, size: 7x7mm1 x Pilotlamp ø11x39mm - 24V 200ma 5W1 x Quad Low Pwr. Opamp. DIL-141 x REGULATOR ADJ +1.2/37V TO-2201 x Metalfilm resistor 0,4W-1%-1K961 x Labory plug ø2,6mm with side-entry - green1 x Styroflex Cond. 100PF - 630V - 1% - PHILIPS - 3.7X9.3mm - AX1 x Styroflex Capacitor. 510PF - 63V - 2.5% - 3X8mm - AX2 x Prog. Interupt Controller DIL-281 x Twist drill HSS - DIN 338 - ø0,6mm (p / pc)2 x Thyristor, 4A, 600V, TO-1261 x QRM pcb1 x PCB relay, SPDT, 12 VDC, 20 A1 x Mono Amplifier Module 9V-12V-18V-20V/DC 18W 4Ohm for Scanners1 x Control Knob ø15mm/16,3h 6mm axle -black1 x MKT Capacitor 39nF/63V 5mm1 x Motor run 60 uF 400 V M8 Faston Ø 50 x 117 mm ± 5%1 x UHF NEXEDGE Digital/Analogue Mobile with GPS1 x Invertor 24V => 220V 1700Watt1 x Styroflex Capacitor. 250PF - 500V - RUWEL - 4X10.5mm - AX1 x BIPOLAR TRANSISTOR, NPN, 250V (BJT) 150W CASE-340AB1 x Amidon 2 gats Material 43 - Permeabilität 8501 x Ceramic. multilayer 6,8nF 50V X7R 10% e=2,5mm1 x Trimmer top adjust Ø 15mm 250K - Piher - RoHS2 x SI-N 150V 8A 50W TO-2202 x NPN 45V 200mA 390mW TO-181 x Dual opamp 15v 0.8w DIL-81 x Reflective Optical Sensor. 32v 1.5%7 x 8-bit magnitude comparator1 x MKT Capacitor 1uF/63V 7mm1 x Crystal 4.33618Mhz - HC 49/S dim.W11.05 x D4.7 x H2.5mm1 x Ø8mm green diffused 565nm 55mcd1 x S18 coil 0.114uH Freq.100Mhz Qu170 orange 3.5turns1 x Ceramic capacitor 22pF 100V NP0 e=2,54mm1 x Metal film resistor 0.4W-1%-150E1 x Mini-DIN cable receptable plastic - 9-pole - Lumberg3 x Heat sink pasta 1 gram1 x Coil, RWR331-208N2-87392,10EZ, MW Osc,red,Q=70,L/C=330uH,10x101 x Troathmike headset VS-1 nodig1 x Low Drop Reg. 8V5 0.5A1 x Labory plug ø2mm - green1 x Carbon film resistor 3W ø6,5x17,5mm 5% - 120E1 x SI-N 35V 3.5A 25W TO-2201 x Automotive bladefuse mini 4A - Purple1 x Styroflex Capacitor. 1NF010 -J - 3.5X7.5mm -AX2 x Labory socket panelmount ø4mm 35A - red1 x IC socket gold-plated machine dil 28p e=7.62mm1 x 1 x UV-Erasable PROM (EPROM) - Standby 40mA max 300ns DIL-281 x Styroflex Cond. 68PF - 630V - 5% - PHILIPS - 3.5X10mm - AX1 x SI Varicap 28V 2.0-2.3pF1 x USB 2.0 Memory Stick 32GB 12 Mbps read / 3 Mbps write1 x DIN socket - 7-pole print right-angled - Lumberg1 x Tantalum Capacitor 2,2uF/25V e=2,5 - RoHS1 x D-Sub connector PCB 2,54mm receptable straight - 15-pole1 x GE Diode 80V 60mA DO-351 x Fuse ø5x20mm slow-blow - 630mA / 250V1 x TV Male to RCA Phone Female1 x Housing plastic adapter for 2x D-SUB 25p - metallized1 x Car Alarm Simulator1 x N-Chnl.MOSFET 200V, 50A, 0.04ohm TO-247AC1 x ABS box 72x50x28mm black1 x Cable shoe plug male uninsulated 2,5-6,0 mm² for MWS..1 x Display on PCB 4-digit 7-segment mux. common cathode1 x Bourns ECW 1J-B24-BC0024-L, Encoder 24-detents 24-cycles1 x Varistor SIOV - S10 K175 175V 0,40W ø12,0x4,6mm1 x Elco radial 220uF 6.3V ø6.3x5mm e=2.5mm 85° (MCUMR6V3227M6.3X5)1 x Low-cost 3.3V zero delay buffer SOIC 81 x Ceramic capacitor 33pF 100V NP0 e=5,08mm2 x Trimmer mini small horizontal 1-turn ø6,3mm Carbon 10K3 x Coil resistormodel 1,2uH 10%1 x SI-P 300V 200mA 360mW TO-2361 x Coil resistormodel 3,3uH 10%1 x Fan 120X120X38MM 230Vac plain bearing 43dBA Sunon3 x Coil, E526HNA01134, size: 10x10mm2 x PNP 45V 800mA 625mW TO-922 x Styroflex Capacitor. 11PF - 500V - 1% - EMZ - 3.5X11mm - AX3 x Dual 4 Inp. NAND Gate DIL-141 x 9W Wirewound resistor 3K9 10% 9x9x38mm Vitrohm - RoHS1 x Styroflex Capacitor. 62PF - 630V - SIEMENS - 4.5X11mm - AX1 x Potentiometer mono-lin ø6mm metal shaft - 10M1 x Crystal 3.582056Mhz - HC 49/U dim. W11.05 x D4.7 x H13.5mm1 x Varistor SIOV - S10 K230 230V 0,40W ø12,0x4,7mm6 x MKT Capacitor 10nF/63V 5mm6 x Up/Dwn Counter/Decoder DIL-181 x 2CR5, Lithium 6V. Cassettte1 x Elco radial 33uF/50V 5x11mm e=2,5mm 105°2 x Ceramic. multilayer 150pF 50V NP0 5% e=2,5mm5 x Dual 4 Inp. NAND Schmitt Trig.DIL-141 x SI-P 25V 100mA 300mW TO-183 x SI-N 30V 100mA 200mW TO-923 x Power cord with molded plug6 x USB 2.0 Memory Stick 64GB 12 Mbps read / 3 Mbps write6 x SI-N 20V 100mA 300mW TO-183 x Octal D Flip-Flop Pos. Trig.TS DIL-205 x Dual D Flip-Flop DIL-143 x Lamp Ba9S socket ø10 x 28mm - 24V/125mA1 x TR5 Fuse Slow 500mA - RoHS1 x Cable 5P-DIN Male - 5P-DIN Male 1mtr2 x GE Diode 60V 25mA2 x Neg. Reg. 24V 0.1A TO-921 x SI N-Chnl. FET 30V 250mW TO-922 x SI-N 4.5V 35mA 160mW SOT-3433 x MKT Capacitor 22nF/63V 5mm3 x SI-P 45V 100mA 300mW TO-181 x BNC Male Crimp type Teflon RG581 x Carbon film resistor 1/2W 5% - 10K1 x Gebra TORX screwdriver TX9 (9mm)1 x SI-N 20V 100mA 300mW TO-181 x Ferrite choke inductor, 2½ turns, Z=680 ohm @ 100MHz1 x PNP 30V 0,1A 0,5W TO-922 x GE Diode 50V 50mA = aa119 DO-353 x SI-N Transistor NPN 60V 100mA 250mW TO-921 x Desoldering wick 1.9mm x 1.50 mtr (7-5L)1 x L/C meter kit, containing PCB with components1 x RCA panelmount receptable gold-plated - red1 x DIODE, TVS, 16V, 1500W DO-151 x Motorcycle helmet set with boommike for kenwood1 x MKT Capacitor 47nF/63V 5mm1 x PNP 50v 0.2a 0.5w TO-922 x SI-P 60V 100mA 250mW TO-921 x TR5 Fuse Slow 1A1 x Neg. Reg. 5V 1A TO-2201 x SI-N 350V 500mA 10W TO-2021 x IC socket gold plated machined dil 28p e=15,24mm1 x 10 pcs Carbon Film resistor 1/4W 5% - 15K1 x Complete Sixfold 220V fast charger, (incl BC157S)2 x Soar Fuseholder for 5x20mm fuse - schroefaansl.1 x 7 Darlington Array DIL-161 x NPN Transistor 100V 2A 30W TO-2202 x Hex D Flip-Flop1 x Dual 2 to 4 Line Decdr/Demltpl DIL-161 x Trim flat screwdriver 0.9x15 Ceramic Blade1 x Dual 2 Inp. NAND Buffer/Driver2 x PNP 30V 0,1A 0,5W TO-921 x 8 to 3 Lne Octal Priority Enc.1 x Lamp Ba9S socket ø10 x 28mm - 12V/180mA1 x Zenerdiode 350mW 12V SOT-231 x SI-N 60V 150mA 150mW TO-236 (SMD)1 x Elco radial 1500uF/50V 16x35,5mm e=7,5mm 105° ( EEUFC1H152L )1 x Ø5mm bi-polar red / green 2 connections1 x Earpiece microphone with noise canceling, and PTT for Icom1 x Foil trimmer 7 - 105pF 3pin Grid 10mm violet Right angled1 x MKT Capacitor 12nF/63V 5mm1 x Zenerdiode 500mW 4V3 DO-351 x Sub-Miniatur Toggleswitch, 1-pole on-on1 x Zener 1.3W 5.6V DO-411 x 10 pcs Resistor 1206 - 0,11E 500mW1 x ø1,8mm yellow diffused 590nm 7mcd1 x Octal Bus Transceiver TS1 x 6x inverting buffer DIL-142 x CHMOS single-chip 8-bit microcontroller. 3.5MHz to 24MHz DIL-401 x Amidon Powder iron toroides 10µ - 1-30 Mhz1 x 256Kbit (32Kx8) LATCHED EEPROM1 x SI-N 20V 100mA 300mW TO-181 x 1 x Potentiometer mono-log ø4mm metal shaft - 10K1 x 8-Bit Shift Register SO-161 x Clock Driver SO-341 x hex schmitt trigg DIL-161 x 1 Watt metal case zener diode 180V 1.4A DO-131 x RCA plug - red Lumberg1 x GE-P 15V 10mA 60mW TO-721 x Panel Fuse Holder 5x20mm - Stelvio1 x 10 pcs Mini Resistor 1/8W SFR16T - 5% - 390E1 x Coupler DIL-61 x Fuse ceramic 5x20mm Slow 6.3A/250V1 x Triple 3 Input NOR Gate1 x Carbon film resistor 1/2W 5% - 1K1 x Quad 2 Inp. NAND Gate DIL-141 x Transistor NPN 15V 200mA 360mW TO-181 x Elco radial 10uF/50V 5x11mm e=2mm 105°1 x SI Diode 50V 0.2A DO-351 x Holder for button cell 23mm max - pcb2 x SI N-Chnl. FET 30V 300mW TO-921 x Dual RS232 Transceiver SO-161 x PNP 65v 0.1a 0.5w TO-921 x DIODE, TVS, 30V, 1.5KW DO-2011 x Neg. Adj.Volt.Regulator TO-2201 x 7-stage binary counter DIL-141 x Metalfilm resistor 0,4W-1%-1K211 x MKT Capacitor 4,7nF/63V 5mm1 x 6-way charger for the batteries KNB-35L/26N/25A1 x SI-P 120V 12A 125W TOP-31 x NTC ø5,5mm max. 10% - 15K1 x v-comp 4x 36v 1.3us DIL-141 x USB pcb right angle type A male1 x Assembly cable flexible 14xø1mm (ø0.6mm core) various colors p/m1 x GE-P 15V 10mA 60mW TO-721 x Trim screwdriver cross PO 2x15 Ceramic Blade1 x 10 pcs Capacitor 0805 - 100pF1 x Carbon film resistor 1W 5% - 100E1 x President Lincoln2 Transceiver CB/10/12mtr FM/AM/LSB/USB1 x Opamp. 22V Temperature Range:-55°C to +125°C. TO-781 x D-Sub connector plug solderversion - 50-pole1 x 1 Chip TV Sound Circ. QIL-12+1 x Heat sink pasta 25 gram1 x TR5 Fuse Slow 630mA1 x hex buffer1 x Metalfilm resistor 0.4W-1%-56K1 x NPN 20V 100mA 300mW TO-921 x PNP 65v 0.1a 0.5w TO-921 x Limited keypad and Display VHF Handheld1 x 64K x 8 CMOS OTP EPROM 200nS1 x 10 pcs Carbon Film resistor 1/4W 5% - 150E1 x Fuse ceramic 5x20mm Slow 2A/250V1 x Dual D Flip-Flop DIL-141 x Thyristor 200V 0.8A TO-921 x Dot/Bar Display Driver DIL-181 x Varta 4922 9V H48.5xL26.5mm, LR22, E1 x si-n 1000v 15a 175w 0.8us1 x SI-P 80V 500mA 1W TO-922 x Neg. Reg. 15V 0.1A TO-921 x Terminal negative regulators, -12V, 1.5A1 x Coil, 154FN8A6439, 10EZ SW2, RF, yellow, Q=110, L/C=5.5uH, 10x101 x Tantalum Capacitor 100uF/10V1 x DC Powerplug ø5,5/ø2,1mm short1 x Octal D Type Flip/Flop DIL-201 x Dual D Flip-Flop1 x Elco axial 2200uF/35V ø18x31.5mm ( TVX1V222MCD )1 x Desoldering wick 2.8mm x 1.50 mtr (10-5L)1 x Amidon Powder iron toroides 10µ - 2-30 Mhz1 x SI-N 35V 500mA 400mW TO-921 x voltage doubler 500v 10a2 x SI N-Chnl.FET 30V 10mA TO-721 x CCTV Security Camera Full HD 1080p with night vision up to 25m1 x Metal film resistor 0.4W-1%-820E1 x MKT Capacitor 47nF/100V 7,5mm1 x zenerdiode 5w 47v CASE17-021 x 1 GHz Prescaler :64 SIL-61 x Styroflex Capacitor. 13PF - 500V - 1% - EMZ - 3.5X11mm - AX1 x Audio Power Amp. Vcc 16V DIL-84 x SI-N 32V 200mA 390mW TO-181 x Elco axial 33uF/40V ø6x10mm1 x Elco radial 47uF/160V 13x21mm e=2,5mm 105°1 x SI-N 45V 800mA 625mW1 x 3.5 mm mono jack male - female 3.5 mm stereo jack1 x Miniature PCB relays SPDT 12VDC - 6A - 1x maak1 x GE-P 30V1 x NPN 30V 0,1A 0,5W TO-921 x Styroflex Capacitor. 25PF - 3X7.5mm - AX1 x SI-P 60V 500mA 625mW TO-921 x 10 pcs Resistor 1206 - 47K1 x Dual Monostable Multivibrator DIL-161 x Coil, LLC238-4027, 7E 455kHz, AM IF, White, Q=70, L/C=150pF, 7x71 x Pos. Reg. 5V 1A TO-2201 x Foil Trimmer 3 - 40pF 3pins Grid 7.5 mm violet1 x HSS Twist drill with ø2.35mm shank - ø0.8mm (p / pc)1 x optoiso 5kv 35v 50% 18us Dil-41 x 8 bit Universial Shift Reg. TS1 x si-p 180v 1.5a 25w 120mhz TO-2201 x PCB relay 12Vdc SPCO 10A 360mW1 x 10 pcs Carbon Film resistor 1/4W 5% - 4K71 x Coil, 150-9069220, size: 7x7mm, soldered out1 x 10 pcs Capacitor 1206 - 68pF1 x Fuse ø5x20mm fast - 315mA / 250V1 x Carbon film resistor 3W ø6,5x17,5mm 5% - 180K1 x RF Transistor NPN 12V 200mA 8.5GHz 2W SOT-2231 x Fuse ø6,3x32mm fast-acting - 25A1 x Analoge voltage panel meter 30V DC 60 x 47mm1 x 1 Megabit 128K x 8 5-volt Only CMOS Flash Memory DIL-321 x -0.5 to +7.0V; 30mA; 12-bit successive approximation register1 x SI-P Transistor PNP 60V 100mA 250mW TO-921 x NPN 30V 0,1A 0,5W TO-921 x Suitable for 1 female input to 2 male outputs1 x MKP Capacitors 330nF 275V, R 22,5mm1 x Wirewound Resistor 10W 5% ø8x44mm - 3R31 x 10 pcs Carbon Film resistor 1/4W 5% - 1K1 x arco468 - 135 - 680pF - 20x15mm1 x Flame proof safety resistors 0.7 w 10% 27E
Closed.
Manufacturers
Reviews
2SC3030
2SC3030
$6,95

Origineel onderdeel. Werkt perfect, goed verpakt en snel gel...